In February 2006, I built hplip-0.9.8 for my PSC1209. Everything (print, scan, info) functions perfectly.
For several days, now, using the same standard build commands on hplip-0.9.11, I have been attempting to upgrade an otherwise identical system. However, only printing works; there is no scanning or device info available. hplip start|stop works, but scanimage -L produces the following: [sanei_debug] Setting debug level of dll to 128. [dll] sane_init: SANE dll backend version 1.0.11 from sane-backends 1.0.15 [dll] sane_init: reading dll.conf [dll] add_backend: adding backend `hpaio' [dll] sane_get_devices [dll] load: searching backend `hpaio' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hpaio.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hpaio.so.1' [dll] init: initializing backend `hpaio' [dll] init: backend `hpaio' is version 1.0.6 [dll] sane_get_devices: found 0 devices [dll] sane_exit: exiting [dll] sane_exit: calling backend `hpaio's exit function [dll] sane_exit: finished No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). I have tried quite a few variations on the basic theme, but always get the same result. What has changed since v0.9.8? What am I failing to see? Thanks for the assistance. _______________________________________________ HPLIP-Help mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/hplip-help
