Can you to this again, however this time run the syslog? tail -f /var/log/messages
and post that log? As well can you ping the printer? Aaron Bjørn T Johansen wrote: > Tha's what I did; I deleted the printer using the web interface for cups and > added the printer using hp-setup > 10.1.1.250 and the I received this log.... > > What am I missing? > > > BTJ > > On Thu, 22 Jun 2006 14:58:54 -0700 > Aaron J Albright <[EMAIL PROTECTED]> wrote: > >> Can you delete the printer from CUPS using http://localhost:631 ? >> >> Then you should be able to run hp-setup -a to re-setup the printer.. In >> the log below I'm not seeing the ghostscript command, that's why I >> thought that the loglevel may need to go to debug. Although perhaps the >> printer isn't using the hp backend. >> >> Aaron >> >> Bjørn T Johansen wrote: >>> Well, that was the log I had included... But I have no remove my HP PS 3310 >>> and installed it using >>> hp-setup, but I still get this log (and not printing) : >>> >>> I [22/Jun/2006:23:34:43 +0200] Job 252 queued on 'hp' by 'root'. >>> D [22/Jun/2006:23:34:43 +0200] Job 252 hold_until = 0 >>> D [22/Jun/2006:23:34:43 +0200] StartJob(252, 0x54d6e0) >>> D [22/Jun/2006:23:34:43 +0200] StartJob() id = 252, file = 0/1 >>> D [22/Jun/2006:23:34:43 +0200] job-sheets=none,none >>> D [22/Jun/2006:23:34:43 +0200] banner_page = 0 >>> D [22/Jun/2006:23:34:43 +0200] StartJob: argv = >>> "hp","252","root","tmp1jzlJN","1","","/var/spool/cups/d00252-001" D >>> [22/Jun/2006:23:34:43 +0200] StartJob: >>> envp[0]="PATH=/usr/lib64/cups/filter:/bin:/usr/bin" D [22/Jun/2006:23:34:43 >>> +0200] StartJob: >>> envp[1]="SOFTWARE=CUPS/1.1" D [22/Jun/2006:23:34:43 +0200] StartJob: >>> envp[2]="USER=root" >>> D [22/Jun/2006:23:34:43 +0200] StartJob: envp[3]="CHARSET=iso-8859-1" >>> D [22/Jun/2006:23:34:43 +0200] StartJob: envp[4]="LANG=en" >>> D [22/Jun/2006:23:34:43 +0200] StartJob: envp[5]="PPD=/etc/cups/ppd/hp.ppd" >>> D [22/Jun/2006:23:34:43 +0200] StartJob: envp[6]="CUPS_SERVERROOT=/etc/cups" >>> D [22/Jun/2006:23:34:43 +0200] StartJob: envp[7]="RIP_MAX_CACHE=8m" >>> D [22/Jun/2006:23:34:43 +0200] StartJob: >>> envp[8]="TMPDIR=/var/spool/cups/tmp" >>> D [22/Jun/2006:23:34:43 +0200] StartJob: >>> envp[9]="CONTENT_TYPE=application/postscript" >>> D [22/Jun/2006:23:34:43 +0200] StartJob: >>> envp[10]="DEVICE_URI=hp:/net/Photosmart_3300_series?ip=10.1.1.250" D >>> [22/Jun/2006:23:34:43 +0200] >>> StartJob: envp[11]="PRINTER=hp" D [22/Jun/2006:23:34:43 +0200] StartJob: >>> envp[12]="CUPS_DATADIR=/usr/share/cups" D [22/Jun/2006:23:34:43 +0200] >>> StartJob: >>> envp[13]="CUPS_FONTPATH=/usr/share/cups/fonts" D [22/Jun/2006:23:34:43 >>> +0200] StartJob: >>> envp[14]="CUPS_SERVER=localhost" D [22/Jun/2006:23:34:43 +0200] StartJob: >>> envp[15]="IPP_PORT=631" >>> D [22/Jun/2006:23:34:43 +0200] StartJob: statusfds = [ 14 15 ] >>> D [22/Jun/2006:23:34:43 +0200] StartJob: filterfds[1] = [ 16 -1 ] >>> D [22/Jun/2006:23:34:43 +0200] StartJob: filter = >>> "/usr/lib64/cups/filter/pstops" >>> D [22/Jun/2006:23:34:43 +0200] StartJob: filterfds[0] = [ 17 18 ] >>> D [22/Jun/2006:23:34:43 +0200] >>> start_process("/usr/lib64/cups/filter/pstops", 0x7fffffc51930, >>> 0x7fffffc50b10, 16, 18, 15) I [22/Jun/2006:23:34:43 +0200] Started filter >>> /usr/lib64/cups/filter/pstops >>> (PID 4159) for job 252. D [22/Jun/2006:23:34:43 +0200] StartJob: filter = >>> "/usr/lib64/cups/filter/foomatic-rip" D [22/Jun/2006:23:34:43 +0200] >>> StartJob: filterfds[1] = [ 16 19 ] >>> D [22/Jun/2006:23:34:43 +0200] >>> start_process("/usr/lib64/cups/filter/foomatic-rip", 0x7fffffc51930, >>> 0x7fffffc50b10, 17, 19, 15) I [22/Jun/2006:23:34:43 +0200] Started >>> filter /usr/lib64/cups/filter/foomatic-rip (PID 4160) for job 252. D >>> [22/Jun/2006:23:34:43 +0200] >>> StartJob: backend = "/usr/lib64/cups/backend/hp" D [22/Jun/2006:23:34:43 >>> +0200] StartJob: filterfds[0] = >>> [ -1 17 ] D [22/Jun/2006:23:34:43 +0200] >>> start_process("/usr/lib64/cups/backend/hp", 0x7fffffc51930, >>> 0x7fffffc50b10, 16, 17, 15) I [22/Jun/2006:23:34:43 +0200] Started backend >>> /usr/lib64/cups/backend/hp >>> (PID 4161) for job 252. D [22/Jun/2006:23:34:43 +0200] ProcessIPPRequest: >>> 13 status_code=0 >>> E [22/Jun/2006:23:34:43 +0200] PID 4160 stopped with status 22! >>> D [22/Jun/2006:23:34:43 +0200] [Job 252] >>> /usr/lib64/cups/filter/foomatic-rip: No such file or directory >>> D [22/Jun/2006:23:34:43 +0200] AcceptClient: 15 from localhost:631. >>> D [22/Jun/2006:23:34:43 +0200] CloseClient: 13 >>> D [22/Jun/2006:23:34:43 +0200] [Job 252] Page = 612x792; 18,36 to 594,783 >>> D [22/Jun/2006:23:34:43 +0200] [Job 252] slowcollate=0, slowduplex=0, >>> sloworder=0 >>> D [22/Jun/2006:23:34:43 +0200] [Job 252] 0 %%BoundingBox: 0 0 612 792 >>> D [22/Jun/2006:23:34:43 +0200] [Job 252] 0 %%Pages: 1 >>> D [22/Jun/2006:23:34:43 +0200] ReadClient: 15 POST / HTTP/1.1 >>> D [22/Jun/2006:23:34:43 +0200] ProcessIPPRequest: 15 status_code=1 >>> D [22/Jun/2006:23:34:43 +0200] ReadClient: 15 POST / HTTP/1.1 >>> D [22/Jun/2006:23:34:43 +0200] ProcessIPPRequest: 15 status_code=1 >>> D [22/Jun/2006:23:34:43 +0200] [Job 252] 0 %%Display HP image at the bottom >>> D [22/Jun/2006:23:34:45 +0200] ReadClient: 15 POST / HTTP/1.1 >>> D [22/Jun/2006:23:34:45 +0200] ProcessIPPRequest: 15 status_code=1 >>> D [22/Jun/2006:23:34:45 +0200] UpdateJob: job 252, file 0 is complete. >>> D [22/Jun/2006:23:34:45 +0200] CancelJob: id = 252 >>> D [22/Jun/2006:23:34:45 +0200] StopJob: id = 252, force = 0 >>> D [22/Jun/2006:23:34:45 +0200] StopJob: printer state is 3 >>> D [22/Jun/2006:23:34:45 +0200] ReadClient: 15 POST / HTTP/1.1 >>> D [22/Jun/2006:23:34:45 +0200] ProcessIPPRequest: 15 status_code=1 >>> D [22/Jun/2006:23:34:53 +0200] AcceptClient: 13 from localhost:631. >>> D [22/Jun/2006:23:34:53 +0200] ReadClient: 13 POST / HTTP/1.1 >>> D [22/Jun/2006:23:34:53 +0200] ProcessIPPRequest: 13 status_code=1 >>> >>> >>> >>> BTJ >>> >>> On Thu, 22 Jun 2006 14:25:59 -0700 >>> Aaron J Albright <[EMAIL PROTECTED]> wrote: >>> >>>> Bjørn, >>>> >>>> If you upgraded from an old version of HPLIP you may need to remove the >>>> printer and reinstall it. You may want to use hp-setup for this. >>>> >>>> If you continue to have problems change the loglevel in the cupsd.conf >>>> to debug then run the tail -f /var/log/cups/error_log, print and post >>>> the log. >>>> >>>> Thanks! >>>> >>>> Aaron >>>> >>>> Bjørn T Johansen wrote: >>>>> The printing does not work anymore, when I print I get the following >>>>> log..: >>>>> >>> Using Tomcat but need to do more? Need to support web services, security? >>> Get stuff done quickly with pre-integrated technology to make your job >>> easier >>> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo >>> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 >> >> Using Tomcat but need to do more? Need to support web services, security? >> Get stuff done quickly with pre-integrated technology to make your job easier >> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo >> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 >> _______________________________________________ >> HPLIP-Help mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/hplip-help > > Using Tomcat but need to do more? Need to support web services, security? > Get stuff done quickly with pre-integrated technology to make your job easier > Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ HPLIP-Help mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/hplip-help
