Tomasz, Can lets setup cups so we can look at the cups log.
edit the /etc/cups/cupsd.conf change loglevel from info to debug. restart cups. then run tail -f /var/log/cups/error_log try and print post the entire cups log if it continues to fail. as well run tail -f /var/log/messages and post any errors. Aaron Tomasz Jarzynka wrote: > Hi, > > after upgrading to hplip 1.6.6 I seem to be unable to print. > When I schedule a print job, nothing happens, CUPS says the > print task is "stopped", and immediately after scheduling > the usblp module removes the /dev/usb/lp0 device: > Jul 13 19:59:58 aereo hpiod: removing usblp driver interface=0 for > hp:/usb/Deskjet_5900_series?serial=CN57V1T0TP047H io/hpiod/device.cpp 481 > Jul 13 19:59:58 aereo kernel: drivers/usb/class/usblp.c: usblp0: removed > > Sometimes, however, the problem does not occur and the printer works > as expected. > > My system is Mandriva 2006 with kernel 2.6.16-1mdk. > > How do I fix this? ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ HPLIP-Help mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/hplip-help
