Hi Rudi, On Wed, 2 Aug 2006 17:10:03 -0300 Rudi Gaelzer <[EMAIL PROTECTED]> wrote:
> Ok. Here's the output of hp-check. automake and autoconf are > not installed. Could that be the problem? you will not know until you install the missing components and try again, after hp-check stops complaining. ;-) Seriously, imho automake and autoconf are important building blocks when it comes to compiling your own software with things like "configure, make, sudo make install". hth Eberhard > --------------------------------------------------------------------------------------------------- > HP Linux Imaging and Printing System (ver. 1.6.6a) > Dependency/Version Check Utility ver. 2.1 > > Copyright (c) 2003-6 Hewlett-Packard Development Company, LP > This software comes with ABSOLUTELY NO WARRANTY. > This is free software, and you are welcome to distribute it > under certain conditions. See COPYING file for more details. > > Basic system info... > --> Linux netuno.df.ufpel.edu.br 2.6.16-1.2133_FC5smp #1 SMP > Tue Jun 6 01:52:09 EDT 2006 i686 i686 i386 GNU/Linux > > Currently installed version... > --> 1.6.6a > > Checking Python version... > --> Version 2.4.3 installed. > --> OK > > Checking for user interface dependencies... > Checking for SIP... > --> OK > Checking for PyQt... > --> OK > Checking Qt version... > --> Version 3.3.6 installed. > --> OK > Checking SIP version... > --> Version 4.3.1 installed > --> OK > Checking PyQt version... > --> Version 3.15.0 installed. > --> OK > > Checking for library dependencies... > Checking for libnetsnmp... > --> OK > Checking for libjpeg... > --> OK > Checking for libusb... > --> OK > Checking for libcrypto... > --> OK > Checking for libpthread... > --> OK > > Checking for application dependencies... > Checking ghostscript... > --> Version 8.15.2 > Checking gcc... > --> gcc (GCC) 4.1.1 20060525 (Red Hat 4.1.1-1) > --> OK > Checking automake... > error: Not found! > Checking autoconf... > error: Not found! > Checking make... > --> GNU Make 3.80 > --> OK > Checking ReportLab (optional)... > warning: Not installed. Fax coverpage support will be disabled. > > Checking kernel module... > Checking for ppdev (optional)... > --> OK > > Checking for CUPS... > --> scheduler is running > --> OK > > Checking existing CUPS queues... > Printer Device URI > HPLIP Installed? ----------- > ----------------------------------------- > -------------------- > e230 ///dev/null > No hp680c > hp:/par/DESKJET_680C?device=/dev/parport0 Yes > hpdj > ipp://10.6.1.10:631/printers/hpdj No > HPLaserJet4 > ipp://10.6.1.10:631/printers/HPLaserJet4 No > le230 > smb://DF-IFM-UFPEL/CERES/LE230 No > lex430 > ipp://10.6.1.10:631/printers/lex430 No > ljet ///dev/null > No lt430dn > socket://10.6.1.61:9100 No > > Note: Any CUPS queues that are not 'HPLIP Installed', must be > installed with the 'hp:' or 'hpfax:' backends to have them > work in HPLIP. Refer to the install instructions on > http://hplip.sourceforge.net for more help. > > If any errors or warnings were reported, please refer to the > installation instructions at: > http://hplip.sourceforge.net/install/index.html > > > On Wednesday 02 August 2006 13:50, Aaron J Albright wrote: > > Rudi, > > > > Are you still having problems with this? The DeskJet 680C > > is supported and should work. Can you run hp-check and post > > the output? > > > > Thanks! > > > > Aaron > > > > Rudi Gaelzer wrote: > > > Hi. I failed to configure my old DeskJet 680C using > > > hp-setup. I'm running Fedora Core 5 and hplip and hpijs > > > are installed as rpm's: > > > > > > hpijs-1.6.6a-1.1 > > > hplip-1.6.6a-1.1 > > > > > > The module ppdev is also loaded into the kernel: > > > > > > $> lsmod | grep ppdev > > > ppdev 12741 0 > > > parport 38665 3 ppdev,lp,parport_pc > > > > > > Although the printer is listed as supported in > > > file:///usr/share/doc/hplip-1.6.6a/supported_devices/inkjet.html > > > When I tried hp-setup I got the following message: > > > > > > HP Linux Imaging and Printing System (ver. 1.6.6a) > > > Printer/Fax Setup Utility ver. 2.1 > > > > > > Copyright (c) 2003-6 Hewlett-Packard Development Company, > > > LP This software comes with ABSOLUTELY NO WARRANTY. > > > This is free software, and you are welcome to distribute it > > > under certain conditions. See COPYING file for more > > > details. > > > > > > Using device: hp:/par/DESKJET_680C?device=/dev/parport0 > > > > > > Setting up device: > > > hp:/par/DESKJET_680C?device=/dev/parport0 > > > > > > (Note: Defaults for each question are maked with a '*'. > > > Press <enter> to accept the default.) > > > > > > error: Unsupported printer model. > > > > > > > > > Trying with hp-setup -g I got: > > > > > > HP Linux Imaging and Printing System (ver. 1.6.6a) > > > Printer/Fax Setup Utility ver. 2.1 > > > > > > Copyright (c) 2003-6 Hewlett-Packard Development Company, > > > LP This software comes with ABSOLUTELY NO WARRANTY. > > > This is free software, and you are welcome to distribute it > > > under certain conditions. See COPYING file for more > > > details. > > > > > > hp-setup[13511]: debug: (xmit) Sending data on channel (5) > > > hp-setup[13511]: > > > debug: > > > 'msg=probedevicesfiltered\nfilter=none\nbus=cups,par,usb\nformat=cups\nti > > >meout=5\nttl=4\n' hp-setup[13511]: debug: (xmit) Reading > > >data on channel > > > (5) > > > hp-setup[13511]: > > > debug: > > > 'msg=probedevicesfilteredresult\nresult-code=0\nnum-devices=1\nencoding=n > > >one\nlength=236\ndata: > > >\nhp:/par/DESKJET_680C?device=/dev/parport0 "HP > > > DESKJET 680C" "HP DESKJET 680C LPT parport0 HPLIP" > > > "MFG:HEWLETT-PACKARD;MDL:DESKJET > > > 680C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:Hewlett-Packard > > > DeskJet 680C;VSTATUS:$CB0$RC0,ff,DN,IDLE;"\n' > > > hp-setup[13511]: debug: > > > ['hp:/par/DESKJET_680C?device=/dev/parport0'] > > > hp-setup[13511]: debug: [<cupsext.Printer object at > > > 0xb7bcc340>, <cupsext.Printer object at 0xb7bcc3b8>, > > > 0xb7bcc340><cupsext.Printer object at > > > 0xb7bcc408>, <cupsext.Printer object at 0xb7bcc4a8>, > > > 0xb7bcc408><cupsext.Printer > > > object at 0xb7bcc4f8>, <cupsext.Printer object at > > > 0xb7bcc570>, <cupsext.Printer object at 0xb7bcc610>, > > > 0xb7bcc570><cupsext.Printer object at > > > 0xb7bcc660>, > > > <cupsext.Printer object at 0xb7bcc6b0>] > > > Using device: hp:/par/DESKJET_680C?device=/dev/parport0 > > > > > > Setting up device: > > > hp:/par/DESKJET_680C?device=/dev/parport0 > > > > > > (Note: Defaults for each question are maked with a '*'. > > > Press <enter> to accept the default.) > > > > > > hp-setup[13511]: debug: Model=DESKJET_680C > > > hp-setup[13511]: debug: (xmit) Sending data on channel (4) > > > hp-setup[13511]: > > > debug: > > > 'msg=querymodel\ndevice-uri=hp:/par/DESKJET_680C?device=/dev/parport0\n' > > > hp-setup[13511]: debug: (xmit) Reading data on channel (4) > > > hp-setup[13511]: debug: > > > 'msg=querymodelresult\nresult-code=48\n' error: > > > Unsupported printer model. > > > > > > > > > > > > Can anyone help me? I can successfully configure the > > > printer using fedora or KDE printer managers. > > > Thanks. > > -- > Rudi Gaelzer > Departamento de Física > Instituto de Física e Matemática > Fundação Universidade Federal de Pelotas > Caixa Postal 354 - Campus UFPel > 96010-900 Pelotas - RS > Fone: +55-53-275-7468 > FAX: +55-53-275-7343 > Usuário de Linux Registrado Nº 153741 > > ------------------------------------------------------------------------- > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance > to share your opinions on IT & business topics through brief > surveys -- and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > _______________________________________________ HPLIP-Help > mailing list [email protected] > https://lists.sourceforge.net/lists/listinfo/hplip-help > ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ HPLIP-Help mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/hplip-help
