Can you please run hp-info -g and post the output? Thanks!
Aaron Felipe Martínez-Pastor wrote: > I'm running Ubuntu 6 (Dapper). I installed the hplip packages using > apt, but when trying to use the tools, they failed with I/O errors and > hpssd closed. > > After trying a lot, I uninstalled and compiled it. Now the printer is > installed under hp:/par/HP_LaserJet_1100?device=/dev/parport0 and with > driver HP LaserJet 1100 Foomatic/hpijs (recommended). > > CUPS works fine, and I can print from any application without > problems. However, when trying to use any of the hplip tools that > connect to the printer, they show a similar error message (this one > from hp-toolbox): > > Traceback (most recent call last): > File "/usr/share/hplip/ui/devmgr4.py", line 579, in InitialUpdate > self.RescanDevices() > File "/usr/share/hplip/ui/devmgr4.py", line 612, in RescanDevices > self.DeviceListRefresh() > File "/usr/share/hplip/ui/devmgr4.py", line 827, in DeviceListRefresh > dev.queryDevice(quick=True) #, no_fwd=True) > File "/usr/share/hplip/base/device.py", line 1062, in queryDevice > status_block = status.StatusType3(self, self.deviceID) > File "/usr/share/hplip/base/status.py", line 411, in StatusType3 > detected_error_state = struct.unpack( 'B', value[0])[0] > TypeError: unsubscriptable object > > hp-check does not show errors or warnings. Only: > Checking existing CUPS queues... > No queues found. > > (I don't know if this has any relevance, just in case). > > hp-setup works OK in interactive mode, but it gives an error at the > end of the process, when trying to print a test page. Similarly, > hp-info gives: > > Using device: hp:/par/HP_LaserJet_1100?device=/dev/parport0 > > hp:/par/HP_LaserJet_1100?device=/dev/parport0 > > Traceback (most recent call last): > File "/usr/bin/hp-info", line 157, in ? > d.queryDevice() > File "/usr/share/hplip/base/device.py", line 1062, in queryDevice > status_block = status.StatusType3(self, self.deviceID) > File "/usr/share/hplip/base/status.py", line 411, in StatusType3 > detected_error_state = struct.unpack( 'B', value[0])[0] > TypeError: unsubscriptable object > > By the way (just in case anyone knows this model well), the small > printer green led (which blinks while printing) blinks one or two > times whenever any of the utilities try to access the printer, and the > error is showed afterwards. hp-colorcal just hang while the big green > led brights still and the small one blinks. It happens also whit > hp-setup -a and with hp-testpage. The printer has never printed > anything with these utilities. > > I am copying below the output of hpssd and hp-toolbox in debug mode. > > I have no clue. > > Thank you. > > Output from hpssd -g > (first part: test page from web browser ---worked perfectly. Second > part: output after starting hp-toolbox -g). > > hpssd[16356]: debug: port=2921 > Listening on localhost:2921 > hpssd[16356]: debug: Starting async loop... > > -----------Here I send a page to the printer from Firefox------- > > hpssd[16356]: debug: Connected to client: 127.0.0.1:1584 (4) > hpssd[16356]: debug: Reading data on channel (8) > hpssd[16356]: debug: 'msg=ModelQuery\nmodel=HP_LaserJet_1100\n' > hpssd[16356]: debug: Handling: ******************** modelquery > ******************** > hpssd[16356]: debug: 'msg=ModelQuery\nmodel=HP_LaserJet_1100\n' > hpssd[16356]: debug: Query model: hp_laserjet_1100 > hpssd[16356]: debug: Searching directory: /usr/share/hplip/data/xml > hpssd[16356]: debug: Searching file: > /usr/share/hplip/data/xml/HPLIP-02-2006.xml > hpssd[16356]: debug: Searching file: > /usr/share/hplip/data/xml/HPLIP-03-2006.xml > hpssd[16356]: debug: Searching file: > /usr/share/hplip/data/xml/HPLIP-05-2006.xml > hpssd[16356]: debug: Searching file: > /usr/share/hplip/data/xml/HPLIP-06-2006.xml > hpssd[16356]: debug: Searching file: > /usr/share/hplip/data/xml/HPLIP-07-2006.xml > hpssd[16356]: debug: Searching file: > /usr/share/hplip/data/xml/HPLIP-08-2006.xml > hpssd[16356]: debug: Searching file: /usr/share/hplip/data/xml/HPLIP-0.9.6.xml > hpssd[16356]: debug: Searching file: /usr/share/hplip/data/xml/HPLIP-0.9.7.xml > hpssd[16356]: debug: Searching file: /usr/share/hplip/data/xml/models.xml > hpssd[16356]: debug: Found > hpssd[16356]: debug: Sending data on channel (8) > hpssd[16356]: debug: > 'msg=modelqueryresult\ncopy-type=0\nscan-type=1\nfax-type=0\ntech-type=3\nio-support=1\npcard-type=0\nio-mode=2\nr0-agent1-sku=C4092A\ncase-model-model1=LaserJet > 1100\ncase-model-model2=LaserJet > 1100se\ncolor-cal-type=0\npanel-check-type=0\ntech-class=LJMono\nstatus-dynamic-counters=0\npq-diag-type=0\nclean-type=0\nr0-agent1-type=1\nresult-code=0\nalign-type=0\nicon=hp_LaserJet_1200.png\nstatus-battery-check=0\nsupport-type=2\nio-control=0\nlinefeed-cal-type=0\nstatus-type=3\nio-mfp-mode=2\nembedded-server-type=0\nio-scan-port=0\nr0-agent1-kind=4\n' > hpssd[16356]: debug: Reading data on channel (8) > hpssd[16356]: debug: > 'msg=Event\ndevice-uri=hp:/par/HP_LaserJet_1100?device=/dev/parport0\njob-id=258\nevent-code=500\nevent-type=event\n' > hpssd[16356]: debug: Handling: ******************** event ******************** > hpssd[16356]: debug: > 'msg=Event\ndevice-uri=hp:/par/HP_LaserJet_1100?device=/dev/parport0\njob-id=258\nevent-code=500\nevent-type=event\n' > hpssd[16356]: debug: Device URI: hp:/par/HP_LaserJet_1100?device=/dev/parport0 > hpssd[16356]: debug: Short/Long: The printer has started a print job./ > hpssd[16356]: debug: Username (jobid): root (258) > hpssd[16356]: debug: New device: hp:/par/HP_LaserJet_1100?device=/dev/parport0 > hpssd[16356]: debug: Connected to client: 127.0.0.1:1588 (4) > hpssd[16356]: debug: Reading data on channel (11) > hpssd[16356]: debug: 'msg=ModelQuery\nmodel=HP_LaserJet_1100\n' > hpssd[16356]: debug: Handling: ******************** modelquery > ******************** > hpssd[16356]: debug: 'msg=ModelQuery\nmodel=HP_LaserJet_1100\n' > hpssd[16356]: debug: Query model: hp_laserjet_1100 > hpssd[16356]: debug: Found > hpssd[16356]: debug: Sending data on channel (11) > hpssd[16356]: debug: > 'msg=modelqueryresult\ncopy-type=0\nscan-type=1\nfax-type=0\ntech-type=3\nio-support=1\npcard-type=0\nio-mode=2\nr0-agent1-sku=C4092A\ncase-model-model1=LaserJet > 1100\ncase-model-model2=LaserJet > 1100se\ncolor-cal-type=0\npanel-check-type=0\ntech-class=LJMono\nstatus-dynamic-counters=0\npq-diag-type=0\nclean-type=0\nr0-agent1-type=1\nresult-code=0\nalign-type=0\nicon=hp_LaserJet_1200.png\nstatus-battery-check=0\nsupport-type=2\nio-control=0\nlinefeed-cal-type=0\nstatus-type=3\nio-mfp-mode=2\nembedded-server-type=0\nio-scan-port=0\nr0-agent1-kind=4\n' > hpssd[16356]: debug: Reading data on channel (11) > hpssd[16356]: debug: Closing channel (11) > hpssd[16356]: debug: '' > hpssd[16356]: debug: Reading data on channel (8) > hpssd[16356]: debug: > 'msg=Event\ndevice-uri=hp:/par/HP_LaserJet_1100?device=/dev/parport0\njob-id=258\nevent-code=501\nevent-type=event\n' > hpssd[16356]: debug: Handling: ******************** event ******************** > hpssd[16356]: debug: > 'msg=Event\ndevice-uri=hp:/par/HP_LaserJet_1100?device=/dev/parport0\njob-id=258\nevent-code=501\nevent-type=event\n' > hpssd[16356]: debug: Device URI: hp:/par/HP_LaserJet_1100?device=/dev/parport0 > hpssd[16356]: debug: Short/Long: Print job has completed./ > hpssd[16356]: debug: Username (jobid): root (258) > hpssd[16356]: debug: Reading data on channel (8) > hpssd[16356]: debug: Closing channel (8) > hpssd[16356]: debug: '' > > ------------hp-toolbox -g started---------- > > hpssd[16356]: debug: Connected to client: 127.0.0.1:1591 (4) > hpssd[16356]: debug: Reading data on channel (8) > hpssd[16356]: debug: 'msg=registerguievent\nusername=felipe\ntype=tbx\n' > hpssd[16356]: debug: Handling: ******************** registerguievent > ******************** > hpssd[16356]: debug: 'msg=registerguievent\nusername=felipe\ntype=tbx\n' > hpssd[16356]: debug: Registering GUI for events: (felipe, tbx, 8) > hpssd[16356]: debug: Reading data on channel (8) > hpssd[16356]: debug: > 'msg=setalerts\nusername=felipe\nemail-from-address=\nemail-to-addresses=\nemail-alerts=False\n' > hpssd[16356]: debug: Handling: ******************** setalerts > ******************** > hpssd[16356]: debug: > 'msg=setalerts\nusername=felipe\nemail-from-address=\nemail-to-addresses=\nemail-alerts=False\n' > hpssd[16356]: debug: Sending data on channel (8) > hpssd[16356]: debug: 'msg=setalertsresult\nresult-code=0\n' > hpssd[16356]: debug: Reading data on channel (8) > hpssd[16356]: debug: > 'msg=querymodel\ndevice-uri=hp:/par/HP_LaserJet_1100?device=/dev/parport0\n' > hpssd[16356]: debug: Handling: ******************** querymodel > ******************** > hpssd[16356]: debug: > 'msg=querymodel\ndevice-uri=hp:/par/HP_LaserJet_1100?device=/dev/parport0\n' > hpssd[16356]: debug: Query model: hp_laserjet_1100 > hpssd[16356]: debug: Found > hpssd[16356]: debug: Sending data on channel (8) > hpssd[16356]: debug: > 'msg=querymodelresult\ncopy-type=0\nscan-type=1\nfax-type=0\ntech-type=3\nio-support=1\npcard-type=0\nio-mode=2\nr0-agent1-sku=C4092A\ncase-model-model1=LaserJet > 1100\ncase-model-model2=LaserJet > 1100se\ncolor-cal-type=0\npanel-check-type=0\ntech-class=LJMono\nstatus-dynamic-counters=0\npq-diag-type=0\nclean-type=0\nr0-agent1-type=1\nresult-code=0\nalign-type=0\nicon=hp_LaserJet_1200.png\nstatus-battery-check=0\nsupport-type=2\nio-control=0\nlinefeed-cal-type=0\nstatus-type=3\nio-mfp-mode=2\nembedded-server-type=0\nio-scan-port=0\nr0-agent1-kind=4\n' > hpssd[16356]: debug: Reading data on channel (8) > hpssd[16356]: debug: 'msg=querystring\nstring-id=5002\n' > hpssd[16356]: debug: Handling: ******************** querystring > ******************** > hpssd[16356]: debug: 'msg=querystring\nstring-id=5002\n' > hpssd[16356]: debug: Sending data on channel (8) > hpssd[16356]: debug: > 'msg=querystringresult\nresult-code=0\nencoding=none\nlength=36\ndata:\nDevice > is powered down or unplugged.' > > ------here, printer led blinks and hp-toolbox report error; I close > hp-toolbox window------ > > hpssd[16356]: debug: Reading data on channel (8) > hpssd[16356]: debug: Closing channel (8) > hpssd[16356]: debug: '' > > > > Output from hp-toolbox -g > > hp-toolbox[16251]: debug: Connected to hpssd on localhost:1561 > hp-toolbox[16251]: debug: Connected to hpiod on localhost:2208 > hp-toolbox[16251]: debug: Initializing toolbox UI > hp-toolbox[16251]: debug: HPLIP Version: 1.6.7 > hp-toolbox[16251]: debug: Print command: hp-print -p%PRINTER% > hp-toolbox[16251]: debug: PCard command: hp-unload -d %DEVICE_URI% > hp-toolbox[16251]: debug: Fax command: hp-sendfax -d %FAX_URI% > hp-toolbox[16251]: debug: FAB command: hp-fab > hp-toolbox[16251]: debug: Copy command: hp-makecopies -d %DEVICE_URI% > hp-toolbox[16251]: debug: Scan command: xsane -V %SANE_URI% > hp-toolbox[16251]: debug: Email alerts: False > hp-toolbox[16251]: debug: Email to address(es): > hp-toolbox[16251]: debug: Email from address: > hp-toolbox[16251]: debug: Auto refresh: False > hp-toolbox[16251]: debug: Auto refresh rate: 1 > hp-toolbox[16251]: debug: Auto refresh type: 0 > hp-toolbox[16251]: debug: Using default 'C' locale > hp-toolbox[16251]: debug: Starting GUI loop... > hp-toolbox[16251]: debug: Rescanning device list... > hp-toolbox[16251]: debug: total changes = 1 > hp-toolbox[16251]: debug: adding: > hp:/par/HP_LaserJet_1100?device=/dev/parport0 > hp-toolbox[16251]: debug: Refresh: ******************** > hp:/par/HP_LaserJet_1100?device=/dev/parport0 ******************** > hp-toolbox[16251]: debug: URI: backend=hp, is_hp=True, bus=par, > model=HP_LaserJet_1100, serial=, dev=/dev/parport0, host=, port=1 > hp-toolbox[16251]: debug: Model/UI model: HP_LaserJet_1100/HP LaserJet 1100 > hp-toolbox[16251]: debug: hpiod socket: 9 > hp-toolbox[16251]: debug: hpssd socket: 3 > hp-toolbox[16251]: debug: (xmit) Sending data on channel (3) > hp-toolbox[16251]: debug: > 'msg=setalerts\nusername=felipe\nemail-from-address=\nemail-to-addresses=\nemail-alerts=False\n' > hp-toolbox[16251]: debug: (xmit) Reading data on channel (3) > hp-toolbox[16251]: debug: 'msg=setalertsresult\nresult-code=0\n' > hp-toolbox[16251]: debug: (xmit) Sending data on channel (3) > hp-toolbox[16251]: debug: > 'msg=querymodel\ndevice-uri=hp:/par/HP_LaserJet_1100?device=/dev/parport0\n' > hp-toolbox[16251]: debug: (xmit) Reading data on channel (3) > hp-toolbox[16251]: debug: > 'msg=querymodelresult\ncopy-type=0\nscan-type=1\nfax-type=0\ntech-type=3\nio-support=1\npcard-type=0\nio-mode=2\nr0-agent1-sku=C4092A\ncase-model-model1=LaserJet > 1100\ncase-model-model2=LaserJet > 1100se\ncolor-cal-type=0\npanel-check-type=0\ntech-class=LJMono\nstatus-dynamic-counters=0\npq-diag-type=0\nclean-type=0\nr0-agent1-type=1\nresult-code=0\nalign-type=0\nicon=hp_LaserJet_1200.png\nstatus-battery-check=0\nsupport-type=2\nio-control=0\nlinefeed-cal-type=0\nstatus-type=3\nio-mfp-mode=2\nembedded-server-type=0\nio-scan-port=0\nr0-agent1-kind=4\n' > hp-toolbox[16251]: debug: Opening device: > hp:/par/HP_LaserJet_1100?device=/dev/parport0 > hp-toolbox[16251]: debug: (xmit) Sending data on channel (9) > hp-toolbox[16251]: debug: > 'msg=deviceopen\nio-mode=2\nio-scan-port=0\ndevice-uri=hp:/par/HP_LaserJet_1100?device=/dev/parport0\nio-control=0\nio-mfp-mode=2\n' > hp-toolbox[16251]: debug: (xmit) Reading data on channel (9) > hp-toolbox[16251]: debug: 'msg=DeviceOpenResult\nresult-code=0\ndevice-id=1\n' > hp-toolbox[16251]: debug: device-id=1 > hp-toolbox[16251]: debug: Opened device: hp > (backend=hp:/par/HP_LaserJet_1100?device=/dev/parport0,is_hp=True,bus=par,model=HP_LaserJet_1100,dev=/dev/parport0,serial=,host=,port=1) > hp-toolbox[16251]: debug: (xmit) Sending data on channel (9) > hp-toolbox[16251]: debug: 'msg=deviceid\ndevice-id=1\n' > hp-toolbox[16251]: debug: (xmit) Reading data on channel (9) > hp-toolbox[16251]: debug: > 'msg=DeviceIDResult\nresult-code=0\nlength=122\ndata:\nMFG:Hewlett-Packard;MDL:HP > LaserJet 1100;DES:HP LaserJet 1100 > Printer;CMD:MLC,PCL,PJL;CLS:PRINTER;REV:1.1;IO PREFS:ECP18;\x00' > hp-toolbox[16251]: debug: Opening HP-MESSAGE channel... > hp-toolbox[16251]: debug: (xmit) Sending data on channel (9) > hp-toolbox[16251]: debug: > 'msg=channelopen\ndevice-id=1\nservice-name=HP-MESSAGE\n' > hp-toolbox[16251]: debug: (xmit) Reading data on channel (9) > hp-toolbox[16251]: debug: > 'msg=ChannelOpenResult\nresult-code=0\nchannel-id=1\n' > hp-toolbox[16251]: debug: channel-id=1 > hp-toolbox[16251]: debug: (xmit) Sending data on channel (9) > hp-toolbox[16251]: debug: > 'msg=getpml\ndevice-id=1\noid=1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.3.0\ntype=16\nchannel-id=1\n' > hp-toolbox[16251]: debug: (xmit) Reading data on channel (9) > hp-toolbox[16251]: debug: > 'msg=GetPMLResult\nresult-code=0\npml-result-code=131\ntype=28\nlength=0\ndata:\n' > hp-toolbox[16251]: debug: Closing HP-MESSAGE channel... > hp-toolbox[16251]: debug: (xmit) Sending data on channel (9) > hp-toolbox[16251]: debug: 'msg=channelclose\ndevice-id=1\nchannel-id=1\n' > hp-toolbox[16251]: debug: (xmit) Reading data on channel (9) > hp-toolbox[16251]: debug: 'msg=ChannelCloseResult\nresult-code=12\n' > hp-toolbox[16251]: debug: (xmit) Sending data on channel (9) > hp-toolbox[16251]: debug: 'msg=devicestatus\ndevice-id=1\n' > hp-toolbox[16251]: debug: (xmit) Reading data on channel (9) > hp-toolbox[16251]: debug: > 'msg=DeviceStatusResult\nresult-code=0\nstatus-code=88\nstatus-name=NoFault\n' > hp-toolbox[16251]: debug: (xmit) Sending data on channel (3) > hp-toolbox[16251]: debug: 'msg=querystring\nstring-id=5002\n' > hp-toolbox[16251]: debug: (xmit) Reading data on channel (3) > hp-toolbox[16251]: debug: > 'msg=querystringresult\nresult-code=0\nencoding=none\nlength=36\ndata:\nDevice > is powered down or unplugged.' > hp-toolbox[16251]: debug: Type 3 LaserJet status > hp-toolbox[16251]: debug: Opening HP-MESSAGE channel... > hp-toolbox[16251]: debug: (xmit) Sending data on channel (9) > hp-toolbox[16251]: debug: > 'msg=channelopen\ndevice-id=1\nservice-name=HP-MESSAGE\n' > hp-toolbox[16251]: debug: (xmit) Reading data on channel (9) > hp-toolbox[16251]: debug: > 'msg=ChannelOpenResult\nresult-code=0\nchannel-id=1\n' > hp-toolbox[16251]: debug: channel-id=1 > hp-toolbox[16251]: debug: (xmit) Sending data on channel (9) > hp-toolbox[16251]: debug: > 'msg=getpml\ndevice-id=1\noid=1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.5.0\ntype=8\nchannel-id=1\n' > hp-toolbox[16251]: debug: (xmit) Reading data on channel (9) > hp-toolbox[16251]: debug: > 'msg=GetPMLResult\nresult-code=0\npml-result-code=131\ntype=28\nlength=0\ndata:\n' > hp-toolbox[16251]: debug: (xmit) Sending data on channel (9) > hp-toolbox[16251]: debug: > 'msg=getpml\ndevice-id=1\noid=1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.2.0\ntype=8\nchannel-id=1\n' > hp-toolbox[16251]: debug: (xmit) Reading data on channel (9) > hp-toolbox[16251]: debug: > 'msg=GetPMLResult\nresult-code=0\npml-result-code=131\ntype=28\nlength=0\ndata:\n' > hp-toolbox[16251]: debug: (xmit) Sending data on channel (9) > hp-toolbox[16251]: debug: > 'msg=getpml\ndevice-id=1\noid=1.3.6.1.2.1.25.3.5.1.1.1\ntype=8\nchannel-id=1\n' > hp-toolbox[16251]: debug: (xmit) Reading data on channel (9) > hp-toolbox[16251]: debug: > 'msg=GetPMLResult\nresult-code=0\npml-result-code=131\ntype=28\nlength=0\ndata:\n' > hp-toolbox[16251]: debug: (xmit) Sending data on channel (9) > hp-toolbox[16251]: debug: > 'msg=getpml\ndevice-id=1\noid=1.3.6.1.2.1.25.3.2.1.5.1\ntype=4\nchannel-id=1\n' > hp-toolbox[16251]: debug: (xmit) Reading data on channel (9) > hp-toolbox[16251]: debug: > 'msg=GetPMLResult\nresult-code=0\npml-result-code=131\ntype=28\nlength=0\ndata:\n' > hp-toolbox[16251]: debug: (xmit) Sending data on channel (9) > hp-toolbox[16251]: debug: > 'msg=getpml\ndevice-id=1\noid=1.3.6.1.2.1.43.6.1.1.3.1.1\ntype=8\nchannel-id=1\n' > hp-toolbox[16251]: debug: (xmit) Reading data on channel (9) > hp-toolbox[16251]: debug: > 'msg=GetPMLResult\nresult-code=0\npml-result-code=131\ntype=28\nlength=0\ndata:\n' > hp-toolbox[16251]: debug: (xmit) Sending data on channel (9) > hp-toolbox[16251]: debug: > 'msg=getpml\ndevice-id=1\noid=1.3.6.1.2.1.25.3.5.1.2.1\ntype=20\nchannel-id=1\n' > hp-toolbox[16251]: debug: (xmit) Reading data on channel (9) > hp-toolbox[16251]: debug: > 'msg=GetPMLResult\nresult-code=0\npml-result-code=131\ntype=28\nlength=0\ndata:\n' > hp-toolbox[16251]: debug: Closing device... > hp-toolbox[16251]: debug: Closing HP-MESSAGE channel... > hp-toolbox[16251]: debug: (xmit) Sending data on channel (9) > hp-toolbox[16251]: debug: 'msg=channelclose\ndevice-id=1\nchannel-id=1\n' > hp-toolbox[16251]: debug: (xmit) Reading data on channel (9) > hp-toolbox[16251]: debug: 'msg=ChannelCloseResult\nresult-code=12\n' > hp-toolbox[16251]: debug: (xmit) Sending data on channel (9) > hp-toolbox[16251]: debug: 'msg=deviceclose\ndevice-id=1\n' > hp-toolbox[16251]: debug: (xmit) Reading data on channel (9) > hp-toolbox[16251]: debug: 'msg=DeviceCloseResult\nresult-code=0\n' > Traceback (most recent call last): > File "/usr/share/hplip/ui/devmgr4.py", line 579, in InitialUpdate > self.RescanDevices() > File "/usr/share/hplip/ui/devmgr4.py", line 612, in RescanDevices > self.DeviceListRefresh() > File "/usr/share/hplip/ui/devmgr4.py", line 827, in DeviceListRefresh > dev.queryDevice(quick=True) #, no_fwd=True) > File "/usr/share/hplip/base/device.py", line 1062, in queryDevice > status_block = status.StatusType3(self, self.deviceID) > File "/usr/share/hplip/base/status.py", line 411, in StatusType3 > detected_error_state = struct.unpack( 'B', value[0])[0] > TypeError: unsubscriptable object > > ------------------------------------------------------------------------- > Using Tomcat but need to do more? Need to support web services, security? > Get stuff done quickly with pre-integrated technology to make your job easier > Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ HPLIP-Help mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/hplip-help
