Hi, thanks for your answers. I installed the printer via hp-setup, but I still got the same error. In fact, I thought the hp-info command should be independent of cups and ppd files. It is only collecting data from the printer and not supposed to print anything. On my notebook I can even use hp-info without having cups installed.
I'm also aware that ghostscript, PyQT, SIP and libnetsnmp are not installed due to space constraints on my flash drive. However, none of these packages is required to run the hp-info command. Do I get something wrong here? I forgot to mention that scanning is not working, too. Cheers, Frank. -------- Original-Nachricht -------- Datum: Mon, 28 Aug 2006 10:29:30 -0500 Von: "Cauligi, Raghothama S" <[EMAIL PROTECTED]> An: "dwelch91" <[EMAIL PROTECTED]>, "Frank Fischer" <[EMAIL PROTECTED]> Betreff: RE: [Hplip-help] hplip on nslu2 > Printing will not work because ghostscript is not installed > >Checking for application dependencies... > >Checking ghostscript... > >error: Not found! > > HP Device Manager will not work because PyQt is not installed > >Checking for user interface dependencies... > >Checking for SIP... > >error: SIP not installed. > >Checking for PyQt... > >error: PyQt not installed. > Checking for library dependencies... > Checking for libnetsnmp... > error: Not found. > Raghu > > > ________________________________ > > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of dwelch91 > Sent: Sunday, August 27, 2006 7:20 PM > To: Frank Fischer > Cc: [email protected] > Subject: Re: [Hplip-help] hplip on nslu2 > > > Try using hp-setup to install the printer into HPLIP. It is currently not > installed in HPLIP. > > As for the printing of the hearts, that sounds like the wrong PPD file is > being used. If you install the printer with hp-setup, and use this new > queue, that problem should be fixed. > > -Don > > > > On 8/27/06, Frank Fischer <[EMAIL PROTECTED]> wrote: > > Hi, > > I try to use hplip on my nslu2 (www.nslu2-linux.org), but can't get it > to > work properly with my HP Officejet 6100 which is connected via usb. > Printing to /dev/usb/lp0 is no problem. In addition I have a usb harddisk > running > on the usb bus having no problem in operation. > > My hp-check output is: > > *********** > > HP Linux Imaging and Printing System (ver. 1.6.7) > Dependency/Version Check Utility ver. 2.1 > > Copyright (c) 2003-6 Hewlett-Packard Development Company, LP > This software comes with ABSOLUTELY NO WARRANTY. > This is free software, and you are welcome to distribute it > under certain conditions. See COPYING file for more details. > > Basic system info... > --> Linux nslu2 2.6.16 #1 PREEMPT Fri Jun 9 07:34:31 PDT 2006 armv5teb > unknown unknown GNU/Linux > > Currently installed version... > --> 1.6.7 > > Checking Python version... > --> Version 2.4.3 installed. > --> OK > > Checking for user interface dependencies... > Checking for SIP... > error: SIP not installed. > Checking for PyQt... > error: PyQt not installed. > > Checking for library dependencies... > Checking for libnetsnmp... > error: Not found. > Checking for libjpeg... > --> OK > Checking for libusb... > --> OK > Checking for libcrypto... > --> OK > Checking for libpthread... > --> OK > > Checking for application dependencies... > Checking ghostscript... > error: Not found! > Checking gcc... > --> gcc (GCC) 3.4.4 > --> OK > Checking make... > --> GNU Make 3.80 > --> OK > Checking ReportLab (optional)... > warning: Not installed. Fax coverpage support will be disabled. > > Checking kernel module... > Checking for ppdev (optional)... > warning: Not found. Parallel printers will not work properly with HPLIP. > > Checking for CUPS... > --> scheduler is running > --> OK > > Checking existing CUPS queues... > Printer Device URI HPLIP Installed? > ------------- ---------------- -------------------- > officejet_raw usb:/dev/usb/lp0 No > > Note: Any CUPS queues that are not 'HPLIP Installed', must be installed > with the 'hp:' or 'hpfax:' backends to have them work in HPLIP. Refer > to the install instructions on http://hplip.sourceforge.net for more > help. > > If any errors or warnings were reported, please refer to the > installation > instructions at: > http://hplip.sourceforge.net/install/index.html > > ******** > > When I use hp-info I get the following error if paper is in the printer > tray: > > ********** > > Device Information Utility ver. 3.4 > > Copyright (c) 2003-6 Hewlett-Packard Development Company, LP > This software comes with ABSOLUTELY NO WARRANTY. > This is free software, and you are welcome to distribute it > under certain conditions. See COPYING file for more details. > > Using device: hp:/usb/Officejet_6200_series?serial=CNxxx > > hp:/usb/Officejet_6200_series?serial=CNxxx > > error: Error opening device (Unknown internal error). Exiting. > > ********** > > > The corresponding hpssd.py debug output is: > > ****** > HP Linux Imaging and Printing System (ver. 1.6.7) > Services and Status Daemon ver. 7.5 > > Copyright (c) 2003-6 Hewlett-Packard Development Company, LP > This software comes with ABSOLUTELY NO WARRANTY. > This is free software, and you are welcome to distribute it > under certain conditions. See COPYING file for more details. > > hpssd[1582]: debug: port=3608 > Listening on localhost:3608 > hpssd[1582]: debug: Starting async loop... > hpssd[1582]: debug: Connected to client: 127.0.0.1:2618 (4) > hpssd[1582]: debug: Reading data on channel (8) > hpssd[1582]: debug: > 'msg=probedevicesfiltered\nfilter=none\nbus=cups,par,usb\nformat=cups\ntimeout=5\nttl=4\n' > > hpssd[1582]: debug: Handling: ******************** probedevicesfiltered > ******************** > hpssd[1582]: debug: > 'msg=probedevicesfiltered\nfilter=none\nbus=cups,par,usb\nformat=cups\ntimeout=5\nttl=4\n' > hpssd[1582]: debug: Exception: 4 (Unknown/invalid device-uri field) > warning: Inrecognized URI: usb:/dev/usb/lp0 > hpssd[1582]: debug: par > hpssd[1582]: debug: Connecting to hpiod (localhost:2208)... > hpssd[1582]: debug: (xmit) Sending data on channel (10) > hpssd[1582]: debug: 'msg=probedevices\nbus=par\n' > hpssd[1582]: debug: (xmit) Reading data on channel (10) > hpssd[1582]: debug: > 'msg=ProbeDevicesResult\nresult-code=0\nnum-devices=0\nlength=0\ndata:\n' > hpssd[1582]: debug: usb > hpssd[1582]: debug: Connecting to hpiod (localhost:2208)... > hpssd[1582]: debug: (xmit) Sending data on channel (10) > hpssd[1582]: debug: 'msg=probedevices\nbus=usb\n' > hpssd[1582]: debug: (xmit) Reading data on channel (10) > hpssd[1582]: debug: > 'msg=ProbeDevicesResult\nresult-code=0\nnum-devices=1\nlength=230\ndata:\ndirect > hp:/usb/Officejet_6200_series?serial=CNxxx "HP > Officejet 6200 series" "HP Officejet 6200 series USB CNxxx HPLIP" > "MFG:HP;MDL:Officejet 6200 series;CLS:PRINTER;DES:Officejet 6200 > series;SN:CNxxx;"\n' > hpssd[1582]: debug: Sending data on channel (8) > hpssd[1582]: debug: > 'msg=probedevicesfilteredresult\nresult-code=0\nnum-devices=1\nencoding=none\nlength=223\ndata:\nhp:/usb/Officejet_6200_series?serial=CNxxx > "HP Officejet 6200 series" "HP Officejet 6200 series USB CNxxx HPLIP" > "MFG:HP;MDL:Officejet 6200 series;CLS:PRINTER;DES:Officejet 6200 > series;SN:CNxxx;"\n' > hpssd[1582]: debug: Reading data on channel (8) > hpssd[1582]: debug: Closing channel (8) > hpssd[1582]: debug: '' > hpssd[1582]: debug: Connected to client: 127.0.0.1:2624 (4) > hpssd[1582]: debug: Reading data on channel (8) > hpssd[1582]: debug: > 'msg=setalerts\nusername=root\nemail-from-address=\nemail-to-addresses=\nemail-alerts=\n' > hpssd[1582]: debug: Handling: ******************** setalerts > ******************** > hpssd[1582]: debug: > 'msg=setalerts\nusername=root\nemail-from-address=\nemail-to-addresses=\nemail-alerts=\n' > hpssd[1582]: debug: Sending data on channel (8) > hpssd[1582]: debug: 'msg=setalertsresult\nresult-code=0\n' > hpssd[1582]: debug: Reading data on channel (8) > hpssd[1582]: debug: > 'msg=querymodel\ndevice-uri=hp:/usb/Officejet_6200_series?serial=CNxxx\n' > hpssd[1582]: debug: Handling: ******************** querymodel > ******************** > hpssd[1582]: debug: > 'msg=querymodel\ndevice-uri=hp:/usb/Officejet_6200_series?serial=CNxxx\n' > hpssd[1582]: debug: New device: > hp:/usb/Officejet_6200_series?serial=CNxxx > hpssd[1582]: debug: Query model: officejet_6200_series > hpssd[1582]: debug: Searching directory: /usr/local/share/hplip/data/xml > hpssd[1582]: debug: Searching file: > /usr/local/share/hplip/data/xml/HPLIP-0.9.6.xml > hpssd[1582]: debug: Searching file: > /usr/local/share/hplip/data/xml/HPLIP- 0.9.7.xml > hpssd[1582]: debug: Searching file: > /usr/local/share/hplip/data/xml/HPLIP-02-2006.xml > hpssd[1582]: debug: Searching file: > /usr/local/share/hplip/data/xml/HPLIP-03-2006.xml > hpssd[1582]: debug: Searching file: > /usr/local/share/hplip/data/xml/HPLIP- 05-2006.xml > hpssd[1582]: debug: Searching file: > /usr/local/share/hplip/data/xml/HPLIP-06-2006.xml > hpssd[1582]: debug: Searching file: > /usr/local/share/hplip/data/xml/HPLIP-07-2006.xml > hpssd[1582]: debug: Searching file: > /usr/local/share/hplip/data/xml/HPLIP- 08-2006.xml > hpssd[1582]: debug: Searching file: > /usr/local/share/hplip/data/xml/models.xml > hpssd[1582]: debug: Found > hpssd[1582]: debug: Sending data on channel (8) > hpssd[1582]: debug: > 'msg=querymodelresult\ncopy-type=0\nscan-type=1\nr6-agent3-kind=3\nr4-agent2-kind=3\nr3-agent1-type=1\nr7-agent2-kind=3\nr2-agent1-type=1\npcard-type=0\nr1-agent1-type=1\nr7-agent1-kind=3\ncolor-cal-type=3\nr1-agent3-sku=99\nstatus-dynamic-counters=1\nr3-agent2-type=2\nr5-agent2-kind=3\nalign-type=1\nr6-agent2-sku=134/135\nr4-agent3-type=3\nr5-agent1-sku=130/131\nr1-agent2-type=2\nr6-agent1-sku=130/131\nr7-agent3-kind=3\nr1-agent2-sku=97/95\nr1-agent3-kind=3\nsupport-type=2\nr0-agent1-type=1\nr7-agent1-sku=853/852\nr0-agent1-kind=3\nr3-agent3-type=3\nr3-agent3-sku=99\nr7-agent3-sku=858\nr6-agent2-kind=3\nr7-agent1-type=1\nr4-agent3-kind=3\nio-mode=1\nr1-agent2-kind=3\nr1-agent3-type=3\nr7-agent3-type=3\npq-diag-type=0\nclean-type=1\nr5-agent2-sku=134/135\nresult-code=0\nr2-agent3-kind=3\nr-type=1\nr5-agent3-type=3\nr4-agent1-type=1\nr0-agent3-sku=99 > (C9369WN)\nembedded-server-type=0\nr0-agent2-kind=3\nio-control=0\nr1-agent1-sku=96/94\nr2-agent1-sku=96/94\nr3-agent1-kind=3\nio-support=2\nr4-agent1-kind=3\nr6-agent1-type=1\nr2-agent1-kind=3\nr5-agent1-kind=3\nr3-agent3-kind=3\npanel-check-type=0\ntech-class=DJGenericVIP\nr5-agent2-type=2\nr6-agent3-sku=138\nr6-agent3-type=3\nr0-agent2-type=2\nr4-agent3-sku=348\nr4-agent2-sku=344/343\nr5-agent3-sku=138\nr6-agent1-kind=3\nr3-agent1-sku=96/94\nr4-agent2-type=2\nr0-agent3-type=3\nio-scan-port=0\nr5-agent3-kind=3\nr7-agent2-sku=857/855\nfax-type=1\nr1-agent1-kind=3\ntech-type=2\nr5-agent1-type=1\nr3-agent2-sku=97/95\nr3-agent2-kind=3\nr0-agent1-sku=94 > (C8765WN)\nr2-agent2-sku=97/95\ncase-model-model5=Officejet > 6215\ncase-model-model4=Officejet 6213\ncase-model-model1=Officejet > 6210\ncase-model-model3=Officejet 6210xi\ncase-model-model2=Officejet > 6210v\nr2-agent3-sku=99\nr0-agent2-sku=95 (C8766WN)/97 > (C9363WN)\nr0-agent3-kind=3\nr2-agent2-type=2\nr7-agent2-type=2\nr2-agent3-type=3\nr2-agent2-kind=3\nicon=Officejet_6200_series.png\nr4-agent1-sku=339/338\nstatus-battery-check=0\nlinefeed-cal-type=0\nstatus-type=2\nio-mfp-mode=2\nr6-agent2-type=2\n' > hpssd[1582]: debug: Reading data on channel (8) > hpssd[1582]: debug: 'msg=querystring\nstring-id=5002\n' > hpssd[1582]: debug: Handling: ******************** querystring > ******************** > hpssd[1582]: debug: 'msg=querystring\nstring-id=5002\n' > hpssd[1582]: debug: Sending data on channel (8) > hpssd[1582]: debug: > 'msg=querystringresult\nresult-code=0\nencoding=none\nlength=36\ndata:\nDevice > is powered down or unplugged.' > hpssd[1582]: debug: Reading data on channel (8) > hpssd[1582]: debug: Closing channel (8) > hpssd[1582]: debug: '' > > ********* > > The printer then prints 3 pages of paper each with a single heart > printed. > > If I use the officejet on my notebook I have no problems with hplip so > it > seems to be somehow related to the nslu2 but I have no clue what the > problem is. Especially because printing to /dev/usb/lp0 works, the usb disk is > operating and hplip recognizes the officejet. > > Does anybody have a clue or knows how to find out what the problem is? > > Thanks in advance. > Frank. > > > > > -- > > > Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! > Ideal f�r Modem und ISDN: http://www.gmx.net/de/go/smartsurfer > > > ------------------------------------------------------------------------- > Using Tomcat but need to do more? Need to support web services, > security? > Get stuff done quickly with pre-integrated technology to make your job > easier > Download IBM WebSphere Application Server v.1.0.1 based on Apache > Geronimo > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > _______________________________________________ > HPLIP-Help mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/hplip-help > > > -- Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! Ideal für Modem und ISDN: http://www.gmx.net/de/go/smartsurfer ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ HPLIP-Help mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/hplip-help
