xsane is there; i have this sshd magic cookie thing going on i haven't had time to fix (i'm at work; computer is at home; i'm ssh-ing into the firewall and then into the host)
hp-setup tells me (when i'm at the console) that it doesn't see any devices. On Tue, 24 Oct 2006, Aaron J Albright wrote: > Looks like you are missing xsane for scanning. Otherwise you should be able > to run hp-setup to configure the printer. > > What happens? > > A > > Mandi wrote: >> >> I tried both the installer and the manual build. >> >> >> Here's hp-check >> >> [EMAIL PROTECTED] ~]# hp-check >> >> HP Linux Imaging and Printing System (ver. 1.6.10) >> Dependency/Version Check Utility ver. 4.0 >> >> Copyright (c) 2003-6 Hewlett-Packard Development Company, LP >> This software comes with ABSOLUTELY NO WARRANTY. >> This is free software, and you are welcome to distribute it >> under certain conditions. See COPYING file for more details. >> >> >> --------------- >> | SYSTEM INFO | >> --------------- >> >> Basic system info (uname -a): --> Linux bucket 2.6.17-5mdv #1 SMP Wed Sep >> 13 14:32:31 EDT 2006 i686 Intel(R) Pentium(R) 4 CPU 2.40GHz unknown >> GNU/Linux >> >> Detected distro (/etc/issue): >> --> mandriva 2006.0 >> >> Detected distro (lsb_release): --> MandrivaLinux 2006.0 (Cooker) >> >> Currently installed version... >> --> OK, HPLIP 1.6.10 currently installed in '/usr/share/hplip'. >> >> Current contents of '/etc/hp/hplip.conf' file: >> # hplip.conf >> >> [hpiod] >> # port=0 (dynamic IP port) >> port=2208 (IANA IP port) >> [hpssd] >> # port=0 (dynamic IP port) >> port=2207 (IANA IP port) >> >> [hplip] >> version=1.6.10 >> jdprobe=0 >> >> [dirs] >> home=/usr/share/hplip >> run=/var/run >> ppd=/usr/share/ppd/HP >> doc=/usr/share/doc/hplip-1.6.10 >> >> # Following values are determined at configure time and cannot be changed. >> [configure] >> network-build=1 >> pp-build=0 >> gui-build=1 >> scanner-build=1 >> fax-build=1 >> internal-tag=1.6.10.11 >> >> >> HPLIP running? --> Yes, HPLIP is running (OK). >> >> HPOJ running? --> No, HPOJ is not running (OK). >> >> Checking Python version... >> --> OK, version 2.4.1 installed >> >> ---------------- >> | DEPENDENCIES | >> ---------------- >> >> Checking for dependency 'libcrypto (libcrypto - OpenSSL cryptographic >> library)'... >> --> OK, found.Checking for dependency 'gcc (gcc - GNU Project C and C++ >> Compiler)'... --> OK, found. >> Checking for dependency 'sane (SANE - Scanning library)'... >> --> OK, found. >> >> Checking for dependency 'gs (GhostScript - PostScript and PDF language >> interpreter and previewer)'... --> OK, found. >> >> Checking for dependency 'libjpeg (libjpeg - JPEG library)'... >> --> OK, found. >> Checking for dependency 'libpthread (libpthread - POSIX threads >> library)'... >> --> OK, found. >> >> Checking for dependency 'make (make - GNU make utility to maintain groups >> of programs)'... --> OK, found. >> >> Checking for dependency 'python-devel (python-devel - Python development >> files)'... >> --> OK, found. >> >> Checking for dependency 'reportlab (Reportlab - PDF library for >> Python)'... >> --> OK, found. >> >> Checking for dependency 'pyqt (PyQt - Qt interface for Python)'... >> --> OK, found. >> >> Checking for dependency 'cups-devel (cups-devel- Common Unix Printing >> System development files)'... >> --> OK, found. >> >> Checking for dependency 'ppdev (ppdev - Parallel port support kernel >> module.)'... --> OK, found. >> >> Checking for dependency 'libusb (libusb - USB library)'... --> OK, found. >> >> Checking for dependency 'scanimage (scanimage - Shell scanning >> program)'... --> OK, found. >> >> Checking for dependency 'libnetsnmp-devel (libnetsnmp-devel - SNMP >> networking library development files)'... >> --> OK, found. >> >> Checking for dependency 'python2x (Python 2.2 or greater - Python >> programming la >> nguage)'... >> --> OK, found. >> >> Checking for dependency 'lsb (LSB - Linux Standard Base support)'... >> --> OK, found. >> >> Checking for dependency 'xsane (xsane - Graphical scanner frontend for >> SANE)'.. >> error: Not found! >> This is an OPTIONAL dependency. >> >> Checking for dependency 'cups (cups - Common Unix Printing System)'... >> --> OK, found. >> >> Checking for dependency 'python23 (Python 2.3 or greater - Required for >> fax func >> tionality)'... >> --> OK, found. >> >> >> ---------------------- >> | INSTALLED PRINTERS | >> ---------------------- >> >> No queues found. >> >> ---------------------- >> | SANE CONFIGURATION | >> ---------------------- >> >> 'hpaio' in /etc/sane.d/dll.conf'... >> --> OK, found. SANE backend 'hpaio' is not properly set up. >> >> Checking output of 'scanimage -L'... >> No scanners were identified. If you were expecting something different, >> check that the scanner is plugged in, turned on and detected by the >> sane-find-scanner tool (if appropriate). Please read the documentation >> which came with this software (README, FAQ, manpages). >> >> >> --------------------- >> | PYTHON EXTENSIONS | >> --------------------- >> >> Checking 'cupsext' CUPS extension... >> --> OK, found. >> >> Checking 'pcardext' Photocard extension... >> --> OK, found. >> >> >> %d errors were detected. >> Please refer to the installation instructions at: >> http://hplip.sourceforge.net/install/index.html >> >> >> >> >> On Tue, 24 Oct 2006, Aaron J Albright wrote: >> >>> Did you go through the instructions here: >>> >>> http://hplip.sourceforge.net/install/step2/mandriva06.html >>> >>> or did you use the installer? >>> >>> Can you run hp-check and post the output? >>> >>> Thanks! >>> >>> A >>> >>> Mandi wrote: >>>> >>>> That's where i am now. took all the hpoj stuff off after the upgrade >>>> to mandriva 2006, tried the rpms from mandriva 2006 and 2007 and got >>>> nothing. Now i have the 1.6.10 software built by hand, and still >>>> nothing. Are there other dependencies? kernel is 2.6.17-5mdv and >>>> ppdev is loaded. >>>> >>>> [EMAIL PROTECTED] ~]$ hp-info >>>> >>>> HP Linux Imaging and Printing System (ver. 1.6.10) >>>> Device Information Utility ver. 3.4 >>>> >>>> Copyright (c) 2003-6 Hewlett-Packard Development Company, LP >>>> This software comes with ABSOLUTELY NO WARRANTY. >>>> This is free software, and you are welcome to distribute it >>>> under certain conditions. See COPYING file for more details. >>>> >>>> error: No devices found. >>>> error: Error occured during interactive mode. Exiting. >>>> >>>> >>>> >>>> On Tue, 24 Oct 2006, Aaron J Albright wrote: >>>> >>>>> HPOJ will not work with HPLIP. >>>>> >>>>> I have tested hplip on Mandriva 2006 and it works well. So if >>>>> possible remove hpoj and install hplip and we can troubleshoot >>>>> whatever problems you are having. It should work though! >>>>> >>>>> Try hplip 1.6.10? >>>>> >>>>> A >>>>> >>>>> Mandi wrote: >>>>>> I was using HPOJ on mandrake 10.0 and 10.1 before an upgrade to >>>>>> mandriva 2006, and HPLIP doesn't. >>>>>> >>>>>> Is there still a way to put HPOJ together? I'd like to get my >>>>>> scanner back. ;) >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> On Mon, 23 Oct 2006, Aaron J Albright wrote: >>>>>> >>>>>>> You are using HPOJ and it works or are you using hplip? >>>>>>> >>>>>>> A >>>>>>> >>>>>>> Mandi wrote: >>>>>>>> This printer kicked total printer butt under HPOJ. The >>>>>>>> printer and scanner worked, no problem. >>>>>>>> >>>>>>>> This is what i get when i unplug the usb and plug is back in: >>>>>>>> >>>>>>>> Oct 23 18:01:22 localhost kernel: usb 1-1: USB disconnect, >>>>>>>> address 4 >>>>>>>> Oct 23 18:01:22 localhost kernel: drivers/usb/class/usblp.c: >>>>>>>> usblp0: removed >>>>>>>> Oct 23 18:01:22 localhost cups: cupsd -HUP succeeded >>>>>>>> Oct 23 18:01:25 localhost kernel: usb 1-1: new full speed USB >>>>>>>> device using uhci_hcd and address 5 >>>>>>>> Oct 23 18:01:25 localhost kernel: usb 1-1: configuration #1 >>>>>>>> chosen from 1 choice >>>>>>>> Oct 23 18:01:25 localhost kernel: drivers/usb/class/usblp.c: >>>>>>>> usblp0: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid >>>>>>>> 0x03F0 pid 0x3A11 >>>>>>>> Oct 23 18:01:25 localhost udev[28894]: run_program: exec of >>>>>>>> program failed >>>>>>>> Oct 23 18:01:25 localhost pam_console.dev[28915]: Restoring >>>>>>>> console permissions for /dev/usbdev1.5 >>>>>>>> Oct 23 18:01:26 localhost cups: cupsd -HUP succeeded >>>>>>>> Oct 23 18:01:28 localhost autosetupprintqueues[29091]: ### >>>>>>>> Program is starting ### >>>>>>>> Oct 23 18:01:28 localhost udev[29101]: run_program: exec of >>>>>>>> program failed >>>>>>>> Oct 23 18:01:28 localhost pam_console.dev[29104]: Restoring >>>>>>>> console permissions for /dev/usb/lp0 >>>>>>>> Oct 23 18:01:28 localhost autosetupprintqueues[29091]: >>>>>>>> launched command: exportDISPLAY="localhost:0.0"; export >>>>>>>> USER=mandi; [ -r /etc/sysconfig/i18n ] >> /dev/null 2>&1 && >>>>>>>> for l in `cat /etc/sysconfig/i18n`; do export $l; done >> >>>>>>>> /dev/null2>&1; [ -r /home/mandi/.i18n ] >> /dev/null 2>&1 && >>>>>>>> for l in `cat /home/mandi/.i18n`; do export $l; done >> >>>>>>>> /dev/null 2>&1; export XAUTHORITY=/home/mandi/.Xauthority; >>>>>>>> /usr/sbin/printerdrake --onlyautoqueue >>>>>>>>>> /dev/null 2>&1; >>>>>>>> Oct 23 18:01:28 localhost printerdrake[29119]: ### Program is >>>>>>>> starting ### >>>>>>>> Oct 23 18:01:34 localhost autosetupprintqueues[29091]: ### >>>>>>>> Program is exiting ## >>>>>>>> >>>>>>>> >>>>>>>> thanks, >>>>>>>> --mandi >>>>>>>> >>>>>>>> On Mon, 23 Oct 2006, Aaron J Albright wrote: >>>>>>>> >>>>>>>>> Has the printer worked before? >>>>>>>>> >>>>>>>>> Can you disconnect the printer run: tail -f >>>>>>>>> /var/log/messages >>>>>>>>> and plug the printer back in and post any output in >>>>>>>>> /var/log/messages? >>>>>>>>> >>>>>>>>> Thanks! >>>>>>>>> >>>>>>>>> Aaron >>>>>>>>> >>>>>>>>> Mandi wrote: >>>>>>>>>> It's a USB connection. >>>>>>>>>> >>>>>>>>>> [EMAIL PROTECTED] ~]$ /usr/lib/cups/backend/hp >>>>>>>>>> direct hp:/no_device_found "Unknown" "hp no_device_found" >>>>>>>>>> >>>>>>>>>> Thanks, >>>>>>>>>> >>>>>>>>>> --mandi >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Mon, 23 Oct 2006, Aaron J Albright wrote: >>>>>>>>>> >>>>>>>>>>> Are you connecting the printer via usb, parallel or >>>>>>>>>>> network? >>>>>>>>>>> >>>>>>>>>>> Can you run: >>>>>>>>>>> >>>>>>>>>>> /usr/lib/cups/backend/hp >>>>>>>>>>> >>>>>>>>>>> and post the output? >>>>>>>>>>> >>>>>>>>>>> Thanks. >>>>>>>>>>> >>>>>>>>>>> A >>>>>>>>>>> >>>>>>>>>>> Mandi wrote: >>>>>>>>>>>> Aaron -- >>>>>>>>>>>> Thanks for the suggestion. >>>>>>>>>>>> >>>>>>>>>>>> I deleted all the hplip software i had installed on >>>>>>>>>>>> the system, removed the printer from CUPS as a usb:// >>>>>>>>>>>> device, and installed hplip 1.6.10 from the installer >>>>>>>>>>>> on sourceforge. >>>>>>>>>>>> >>>>>>>>>>>> hp-setup does not discover the printer. A popup >>>>>>>>>>>> window reports "No devices found. Please make sure >>>>>>>>>>>> your printer is properly connected and powered-on". >>>>>>>>>>>> >>>>>>>>>>>> I have the ppdev module loaded in the kernel, bus >>>>>>>>>>>> lsusb and the hp tools show nothing. I tried a couple >>>>>>>>>>>> of the kernels i have laying around, they are all 2.6. >>>>>>>>>>>> >>>>>>>>>>>> Anything else I should look for? >>>>>>>>>>>> >>>>>>>>>>>> thanks, >>>>>>>>>>>> --mandi >>>>>>>>>>>> >>>>>>>>>>>> On Fri, 20 Oct 2006, Aaron J Albright wrote: >>>>>>>>>>>> >>>>>>>>>>>>> For the HP tools to work the printer needs to use >>>>>>>>>>>>> the hp:/ backend. Would it be possible to remove >>>>>>>>>>>>> hplip and install using the source from >>>>>>>>>>>>> hplip.sf.net? >>>>>>>>>>>>> >>>>>>>>>>>>> If not try deleting the printer queues and run >>>>>>>>>>>>> hp-setup to configure the printer. I could never >>>>>>>>>>>>> get printerdrake to do it correctly, and it's rather >>>>>>>>>>>>> more difficult. >>>>>>>>>>>>> >>>>>>>>>>>>> Hope this helps. >>>>>>>>>>>>> >>>>>>>>>>>>> A >>>>>>>>>>>>> >>>>>>>>>>>>> Mandi wrote: >>>>>>>>>>>>>> Hi. >>>>>>>>>>>>>> >>>>>>>>>>>>>> I have an Office Jet 5510, that was working very >>>>>>>>>>>>>> well with HPOJ and Mandrake 10.1. I recently >>>>>>>>>>>>>> upgraded to Mandriva 2006 to resolve other issues >>>>>>>>>>>>>> on the host, and have lost the ability to use the >>>>>>>>>>>>>> printer and scanner functions (i've never tried >>>>>>>>>>>>>> the faxing from the computer). >>>>>>>>>>>>>> >>>>>>>>>>>>>> I removed all of the HPOJ software that wasn't >>>>>>>>>>>>>> caught by rpm dependencies, but the MDV versions >>>>>>>>>>>>>> of HPLIP for 2006 didn't work at all with the >>>>>>>>>>>>>> printer, either as usb:// or hp:/ >>>>>>>>>>>>>> >>>>>>>>>>>>>> so, i have built the 1.6.9 HPLIP software from the >>>>>>>>>>>>>> Mandriva 2007 RC srpms. I have the following >>>>>>>>>>>>>> installed: >>>>>>>>>>>>>> >>>>>>>>>>>>>> hplip-1.6.9-0.1.20060mdk >>>>>>>>>>>>>> hplip-model-data-1.6.9-0.1.20060mdk >>>>>>>>>>>>>> hplip-hpijs-ppds-1.6.9-0.1.20060mdk >>>>>>>>>>>>>> hplip-hpijs-1.6.9-0.1.20060mdk >>>>>>>>>>>>>> >>>>>>>>>>>>>> I have these sane packages installed: >>>>>>>>>>>>>> libsane1-1.0.16-5mdk >>>>>>>>>>>>>> libsane1-devel-1.0.16-5mdk >>>>>>>>>>>>>> libsane-hpaio1-1.6.9-0.1.20060mdk (from hplip >>>>>>>>>>>>>> srpm) >>>>>>>>>>>>>> sane-backends-1.0.16-5mdk >>>>>>>>>>>>>> sane-frontends-1.0.13-2mdk >>>>>>>>>>>>>> xsane-0.97-2mdk >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> After installing these versions, printerdrake was >>>>>>>>>>>>>> able to find the printer, and installed it with a >>>>>>>>>>>>>> usb:// uri into CUPS. none of the HP utilities >>>>>>>>>>>>>> work, and CUPS doesn't see the printer as an hp:/ >>>>>>>>>>>>>> device. I see the hp "no device found" listings >>>>>>>>>>>>>> for printer and scanner devices in the CUPS >>>>>>>>>>>>>> options when trying to install the device by hand. >>>>>>>>>>>>>> With the usb:// uri, i can print to the printer >>>>>>>>>>>>>> but sane does not see any scanners. >>>>>>>>>>>>>> >>>>>>>>>>>>>> I've tried manually switching the device uri in >>>>>>>>>>>>>> /etc/cups/printers.conf to >>>>>>>>>>>>>> DeviceURI different hp:/usb/ uris, but I haven't >>>>>>>>>>>>>> hit on one that comes up as a supported model >>>>>>>>>>>>>> name. >>>>>>>>>>>>>> >>>>>>>>>>>>>> The hp daemons are running >>>>>>>>>>>>>> root 2778 0.0 0.1 37364 1288 ? Ss >>>>>>>>>>>>>> Oct19 0:00 ./hpiod >>>>>>>>>>>>>> root 2791 0.0 0.8 9128 5620 ? S >>>>>>>>>>>>>> Oct19 0:09 python ./hpssd.py >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Is there something else I can look for? The >>>>>>>>>>>>>> output of hp-check is below. >>>>>>>>>>>>>> >>>>>>>>>>>>>> thanks, >>>>>>>>>>>>>> --mandi >>>>>>>>>>>>>> >>>>>>>>>>>>>> (xsane is installed; i have a magic cookie problem >>>>>>>>>>>>>> i'm also working on since upgrading) >>>>>>>>>>>>>> >>>>>>>>>>>>>> [EMAIL PROTECTED] ~]$ hp-check >>>>>>>>>>>>>> >>>>>>>>>>>>>> HP Linux Imaging and Printing System (ver. 1.6.9) >>>>>>>>>>>>>> Dependency/Version Check Utility ver. 3.1 >>>>>>>>>>>>>> >>>>>>>>>>>>>> Copyright (c) 2003-6 Hewlett-Packard Development >>>>>>>>>>>>>> Company, LP >>>>>>>>>>>>>> This software comes with ABSOLUTELY NO WARRANTY. >>>>>>>>>>>>>> This is free software, and you are welcome to >>>>>>>>>>>>>> distribute it >>>>>>>>>>>>>> under certain conditions. See COPYING file for >>>>>>>>>>>>>> more details. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Basic system info... --> Linux bucket 2.6.17-5mdv >>>>>>>>>>>>>> #1 SMP Wed Sep 13 14:32:31 EDT 2006 i686 Intel(R) >>>>>>>>>>>>>> Pentium(R) 4 CPU 2.40GHz unknown GNU/Linux >>>>>>>>>>>>>> >>>>>>>>>>>>>> Currently installed version... >>>>>>>>>>>>>> --> OK, HPLIP 1.6.9 currently installed. >>>>>>>>>>>>>> >>>>>>>>>>>>>> HPLIP running? --> Yes, HPLIP is running (OK). >>>>>>>>>>>>>> >>>>>>>>>>>>>> HPOJ running? --> No, HPOJ is not running (OK). >>>>>>>>>>>>>> >>>>>>>>>>>>>> Checking Python version... >>>>>>>>>>>>>> --> OK, version 2.4.1 installed >>>>>>>>>>>>>> Checking for dependency 'libcrypto (libcrypto - >>>>>>>>>>>>>> OpenSSL cryptographic library)'... >>>>>>>>>>>>>> --> OK, found. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Checking for dependency 'gcc (gcc - GNU Project C >>>>>>>>>>>>>> and C++ Compiler)'... --> OK, found. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Checking for dependency 'sane (SANE - Scanning >>>>>>>>>>>>>> library)'... >>>>>>>>>>>>>> --> OK, found. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Checking for dependency 'gs (GhostScript - >>>>>>>>>>>>>> PostScript and PDF language interpreter and >>>>>>>>>>>>>> previewer)'... --> OK, found. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Checking for dependency 'libjpeg (libjpeg - JPEG >>>>>>>>>>>>>> library)'... >>>>>>>>>>>>>> --> OK, found. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Checking for dependency 'libpthread (libpthread - >>>>>>>>>>>>>> POSIX threads library)'... >>>>>>>>>>>>>> --> OK, found. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Checking for dependency 'make (make - GNU make >>>>>>>>>>>>>> utility to maintain groups of programs)'... --> >>>>>>>>>>>>>> OK, found. >>>>>>>>>>>>>> Checking for dependency 'python-devel >>>>>>>>>>>>>> (python-devel - Python development files)'... >>>>>>>>>>>>>> --> OK, found. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Checking for dependency 'reportlab (Reportlab - >>>>>>>>>>>>>> PDF library for Python)'... >>>>>>>>>>>>>> --> OK, found. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Checking for dependency 'pyqt (PyQt - Qt interface >>>>>>>>>>>>>> for Python)'... >>>>>>>>>>>>>> --> OK, found. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Checking for dependency 'cups-devel (cups-devel- >>>>>>>>>>>>>> Common Unix Printing System development files)'... >>>>>>>>>>>>>> --> OK, found. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Checking for dependency 'ppdev (ppdev - Parallel >>>>>>>>>>>>>> port support kernel module.)'... >>>>>>>>>>>>>> --> OK, found. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Checking for dependency 'libusb (libusb - USB >>>>>>>>>>>>>> library)'... --> OK, found. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Checking for dependency 'scanimage (scanimage - >>>>>>>>>>>>>> Shell scanning program)'... >>>>>>>>>>>>>> --> OK, found. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Checking for dependency 'libnetsnmp-devel >>>>>>>>>>>>>> (libnetsnmp-devel - SNMP networking library >>>>>>>>>>>>>> development files)'... >>>>>>>>>>>>>> --> OK, found. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Checking for dependency 'python2x (Python 2.2 or >>>>>>>>>>>>>> greater - Python programming language)'... >>>>>>>>>>>>>> --> OK, found. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Checking for dependency 'lsb (LSB - Linux Standard >>>>>>>>>>>>>> Base support)'... >>>>>>>>>>>>>> --> OK, found. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Checking for dependency 'xsane (xsane - Graphical >>>>>>>>>>>>>> scanner frontend for SANE)'... error: Not found! >>>>>>>>>>>>>> >>>>>>>>>>>>>> Checking for dependency 'cups (cups - Common Unix >>>>>>>>>>>>>> Printing System)'... --> OK, found. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Checking for dependency 'python23 (Python 2.3 or >>>>>>>>>>>>>> greater - Required for fax functionality)'... >>>>>>>>>>>>>> --> OK, found. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Checking existing CUPS queues... Printer >>>>>>>>>>>>>> Device URI HPLIP Installed? >>>>>>>>>>>>>> ------------ >>>>>>>>>>>>>> ------------------------------------------------------ >>>>>>>>>>>>>> -------------------- >>>>>>>>>>>>>> HPOffJet5500 >>>>>>>>>>>>>> usb://hp/officejet%205500%20series?serial=MY47UG119M96 >>>>>>>>>>>>>> No >>>>>>>>>>>>>> note: Any CUPS queues that are not 'HPLIP >>>>>>>>>>>>>> Installed', must be installed >>>>>>>>>>>>>> note: with the 'hp:' or 'hpfax:' backends to have >>>>>>>>>>>>>> them work in HPLIP. Refer >>>>>>>>>>>>>> note: to the install instructions on >>>>>>>>>>>>>> http://hplip.sourceforge.net for more help. >>>>>>>>>>>>>> >>>>>>>>>>>>>> If any errors or warnings were reported, please >>>>>>>>>>>>>> refer to the installation instructions at: >>>>>>>>>>>>>> http://hplip.sourceforge.net/install/index.html >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> ------------------------------------------------------------------------- >>>>>>>>>>>>>> >>>>>>>>>>>>>> Using Tomcat but need to do more? Need to support >>>>>>>>>>>>>> web services, security? >>>>>>>>>>>>>> Get stuff done quickly with pre-integrated >>>>>>>>>>>>>> technology to make your job easier >>>>>>>>>>>>>> Download IBM WebSphere Application Server v.1.0.1 >>>>>>>>>>>>>> based on Apache Geronimo >>>>>>>>>>>>>> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 >>>>>>>>>>>>>> >>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>> HPLIP-Help mailing list >>>>>>>>>>>>>> HPLIP-Help@lists.sourceforge.net >>>>>>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/hplip-help >>>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> ------------------------------------------------------------------------- >>>>>>>>>>>> >>>>>>>>>>>> Using Tomcat but need to do more? Need to support web >>>>>>>>>>>> services, security? >>>>>>>>>>>> Get stuff done quickly with pre-integrated technology >>>>>>>>>>>> to make your job easier >>>>>>>>>>>> Download IBM WebSphere Application Server v.1.0.1 >>>>>>>>>>>> based on Apache Geronimo >>>>>>>>>>>> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 >>>>>>>>>>>> >>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>> HPLIP-Help mailing list >>>>>>>>>>>> HPLIP-Help@lists.sourceforge.net >>>>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/hplip-help >>>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> ------------------------------------------------------------------------- >>>>>>>>>> >>>>>>>>>> Using Tomcat but need to do more? Need to support web >>>>>>>>>> services, security? >>>>>>>>>> Get stuff done quickly with pre-integrated technology to >>>>>>>>>> make your job easier >>>>>>>>>> Download IBM WebSphere Application Server v.1.0.1 based on >>>>>>>>>> Apache Geronimo >>>>>>>>>> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 >>>>>>>>>> >>>>>>>>>> _______________________________________________ >>>>>>>>>> HPLIP-Help mailing list >>>>>>>>>> HPLIP-Help@lists.sourceforge.net >>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/hplip-help >>>>>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> ------------------------------------------------------------------------- >>>>>> >>>>>> Using Tomcat but need to do more? Need to support web services, >>>>>> security? >>>>>> Get stuff done quickly with pre-integrated technology to make your >>>>>> job easier >>>>>> Download IBM WebSphere Application Server v.1.0.1 based on Apache >>>>>> Geronimo >>>>>> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 >>>>>> _______________________________________________ >>>>>> HPLIP-Help mailing list >>>>>> HPLIP-Help@lists.sourceforge.net >>>>>> https://lists.sourceforge.net/lists/listinfo/hplip-help >>>>>> >>>>> >>>> >>> >> > ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ HPLIP-Help mailing list HPLIP-Help@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/hplip-help
