Subject: Re: [Hplip-help] Color Calibration Problem Date: Thursday 16 November 2006 21:22 From: Sandy Bryant <[EMAIL PROTECTED]> To: Aaron J Albright <[EMAIL PROTECTED]>
hp-testpage -g: hp-testpage[27361]: debug: (xmit) Sending data on channel (3) hp-testpage[27361]: debug: 'msg=probedevicesfiltered\nfilter=none\nbus=cups\nformat=cups\ntimeout=5\nttl =4\n' hp-testpage[27361]: debug: (xmit) Reading data on channel (3) hp-testpage[27361]: debug: 'msg=probedevicesfilteredresult\nresult-code=0\nnum-devices=1\nencoding=none\ nlength=118\ndata: \ndirect hp:/usb/photosmart_7550?serial=CN34S4211Q7E "HP photosmart_7550" "hp:/usb/photosmart_7550?serial=CN34S4211Q7E"\n' hp-testpage[27361]: debug: ['direct'] hp-testpage[27361]: debug: [<cupsext.Printer object at 0xb79e5c78>, <cupsext.Printer object at 0xb79e5cc8>, <cupsext.Printer object at 0xb79e5ca0>, <cupsext.Printer object at 0xb79e5c50>, <cupsext.Printer object at 0xb79e5d18>, <cupsext.Printer object at 0xb79e5d40>, <cupsext.Printer object at 0xb79e5d90>, <cupsext.Printer object at 0xb79e5de0>] hp-testpage[27361]: debug: Exception: 4 (Unknown/invalid device-uri field) error: Error occured during interactive mode. Exiting. hp-colorcal: hp-colorcal[27425]: debug: (xmit) Sending data on channel (3) hp-colorcal[27425]: debug: 'msg=probedevicesfiltered\nfilter=none\nbus=usb,par,cups\nformat=cups\ntimeou t=5\nttl=4\n' hp-colorcal[27425]: debug: (xmit) Reading data on channel (3) hp-colorcal[27425]: debug: 'msg=probedevicesfilteredresult\nresult-code=0\nnum-devices=1\nencoding=none\ nlength=118\ndata: \ndirect hp:/usb/photosmart_7550?serial=CN34S4211Q7E "HP photosmart_7550" "hp:/usb/photosmart_7550?serial=CN34S4211Q7E"\n' hp-colorcal[27425]: debug: ['direct'] hp-colorcal[27425]: debug: [<cupsext.Printer object at 0xb7b56390>, <cupsext.Printer object at 0xb7b56700>, <cupsext.Printer object at 0xb7b564d0>, <cupsext.Printer object at 0xb7b562a0>, <cupsext.Printer object at 0xb7b56818>, <cupsext.Printer object at 0xb7b56890>, <cupsext.Printer object at 0xb7b568e0>, <cupsext.Printer object at 0xb7b56930>] hp-colorcal[27425]: debug: Exception: 4 (Unknown/invalid device-uri field) error: Error occured during interactive mode. Exiting. No error messages in /var/log/cups/error_log or in /var/log/messages. Thanks for looking at this, Aaron. ------------------------------- On Thursday 16 November 2006 15:16, you wrote: > Can you run: > > hp-testpage -g > > and post the output? > > As for color cal, try doing; > > hp-colorcal -g > > and posting that output as well. > > Aaron > > Sandy Bryant wrote: > > I am running the HP Device Manager under SuSE 10.1, with an HP Photosmart > > 7550 printer. If I try to run the color calibration tool, it tells me a > > page is about to print, I press <continue> as instructed, but nothing > > comes out of the printer, so I can go no further. No messages show up > > in /var/log/cups/error_log, or in /var/log/messages, so it appears the > > print command never gets through to CUPS. I have no problems printing > > from any application, and I have several variations of the HP 7550 > > (draft, color, grayscale, etc.) configured through CUPS: all work > > perfectly. > > > > In trying to troubleshoot this, I tried printing test pages from the HP > > Device Manager. Only if I select "printer 0" (which happens to be draft > > mode) does the test page print. Any other selection yields an error > > message. The system log says "python: hp-toolbox[25349] error: Print > > command failed with exit code 256!", and the CUPS error log says > > "print_job: resource name '/printers/2' no good!" (or any printer number > > other than "0", which as I said is draft mode. Now, if I don't use the > > gui Device Manger, but instead type in hp-testpage from the command line, > > it asks me to select a CUPS printer on a list of 0-7, and after I do this > > (ANY of the printers) the test page prints correctly. No error messages. > > > > Is the test page problem related to the failure of the color calibration > > tool, and why is there a difference between the gui and the command line? > > If I run hp-colorcal from the command line (which is useless because > > there is no color box printed for one to check against the printed page), > > nothing prints there either. -- Sandy ------------------------------------------------------- -- Sandy ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ HPLIP-Help mailing list HPLIP-Help@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/hplip-help
