On 20/12/06, Suffield, David <[EMAIL PROTECTED]> wrote: > Ok, what was the original scanning problem? Can you give me the syslog > messages that are displayed during your scan job? Did scanning work at > one time?
Scanning has not worked using Edgy at any point. It did used to work on Dapper but as discussed previously that was on a separate machine (with HPLIP 0.9.7, so I suppose of limited use here). Pasted from original messages: I have a fresh Ubuntu Edgy installation and am trying unsuccessfully to scan using a HP PSC 2210 attached via USB. [EMAIL PROTECTED]:~$ uname -a Linux gateway 2.6.17-10-generic #2 SMP Tue Dec 5 22:28:26 UTC 2006 i686 GNU/Linux [EMAIL PROTECTED]:~$ apt-show-versions | grep sane xsane-common/edgy uptodate 0.99+0.991-1ubuntu2 libsane/edgy uptodate 1.0.18-3ubuntu1 sane-utils/edgy uptodate 1.0.18-3ubuntu1 xsane/edgy uptodate 0.99+0.991-1ubuntu2 [EMAIL PROTECTED]:~$ apt-show-versions | grep hplip hplip/edgy uptodate 1.6.9-0ubuntu2 hplip-data/edgy uptodate 1.6.9-0ubuntu2 [EMAIL PROTECTED]:~$ apt-show-versions | grep cups libgnomecupsui1.0-1c2a/edgy uptodate 0.31-1.1ubuntu14 libcupsys2/edgy uptodate 1.2.4-2ubuntu3 cupsys-driver-gutenprint/edgy uptodate 5.0.0-2ubuntu2 libgnomecups1.0-1/edgy uptodate 0.2.2-5ubuntu1 cupsys/edgy uptodate 1.2.4-2ubuntu3 bluez-cups/edgy uptodate 3.7-1ubuntu4 libcupsimage2/edgy uptodate 1.2.4-2ubuntu3 cupsys-bsd/edgy uptodate 1.2.4-2ubuntu3 cupsys-client/edgy uptodate 1.2.4-2ubuntu3 gnome-cups-manager/edgy uptodate 0.31-1.1ubuntu14 cupsys-common/edgy uptodate 1.2.4-2ubuntu3 I have added the printer via the CUPs web interface and printing is working as it should. Scanning, which worked fine using Ubuntu Dapper with the relevant packages, is not working though: [EMAIL PROTECTED]:~$ export SANE_DEBUG_DLL=128 [EMAIL PROTECTED]:~$ scanimage -L [sanei_debug] Setting debug level of dll to 128. [dll] sane_init: SANE dll backend version 1.0.12 from sane-backends 1.0.18 [dll] sane_init/read_dlld: processing /etc/sane.d/dll.d ... [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip [dll] sane_init/read_config: reading dll.d/hplip [dll] add_backend: adding backend `hpaio' [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/libsane-extras [dll] sane_init/read_config: reading dll.d/libsane-extras [dll] add_backend: adding backend `epkowa' [dll] add_backend: adding backend `geniusvp2' [dll] add_backend: adding backend `hp_rts88xx' [dll] sane_init/read_dlld: done. [dll] sane_init/read_config: reading dll.conf [dll] add_backend: adding backend `hpaio' [dll] add_backend: `hpaio' is already there [dll] sane_get_devices [dll] load: searching backend `hpaio' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hpaio.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hpaio.so.1' [dll] init: initializing backend `hpaio' [dll] init: backend `hpaio' is version 1.0.6 [dll] load: searching backend `hp_rts88xx' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hp_rts88xx.so.1' [dll] load: couldn't open `/usr/lib/sane/libsane-hp_rts88xx.so.1' (No such file or directory) [dll] load: couldn't find backend `hp_rts88xx' (No such file or directory) [dll] load: searching backend `geniusvp2' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-geniusvp2.so.1' [dll] load: couldn't open `/usr/lib/sane/libsane-geniusvp2.so.1' (No such file or directory) [dll] load: couldn't find backend `geniusvp2' (No such file or directory) [dll] load: searching backend `epkowa' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-epkowa.so.1' [dll] load: couldn't open `/usr/lib/sane/libsane-epkowa.so.1' (No such file or directory) [dll] load: couldn't find backend `epkowa' (No such file or directory) [dll] sane_get_devices: found 1 devices device `hpaio:/usb/PSC_2200_Series?serial=MY283D26QH0G' is a hp PSC_2200_Series multi-function peripheral [dll] sane_exit: exiting [dll] sane_exit: calling backend `hpaio's exit function [dll] sane_exit: finished [EMAIL PROTECTED]:~$ scanimage [sanei_debug] Setting debug level of dll to 128. [dll] sane_init: SANE dll backend version 1.0.12 from sane-backends 1.0.18 [dll] sane_init/read_dlld: processing /etc/sane.d/dll.d ... [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip [dll] sane_init/read_config: reading dll.d/hplip [dll] add_backend: adding backend `hpaio' [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/libsane-extras [dll] sane_init/read_config: reading dll.d/libsane-extras [dll] add_backend: adding backend `epkowa' [dll] add_backend: adding backend `geniusvp2' [dll] add_backend: adding backend `hp_rts88xx' [dll] sane_init/read_dlld: done. [dll] sane_init/read_config: reading dll.conf [dll] add_backend: adding backend `hpaio' [dll] add_backend: `hpaio' is already there [dll] sane_get_devices [dll] load: searching backend `hpaio' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hpaio.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hpaio.so.1' [dll] init: initializing backend `hpaio' [dll] init: backend `hpaio' is version 1.0.6 [dll] load: searching backend `hp_rts88xx' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hp_rts88xx.so.1' [dll] load: couldn't open `/usr/lib/sane/libsane-hp_rts88xx.so.1' (No such file or directory) [dll] load: couldn't find backend `hp_rts88xx' (No such file or directory) [dll] load: searching backend `geniusvp2' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-geniusvp2.so.1' [dll] load: couldn't open `/usr/lib/sane/libsane-geniusvp2.so.1' (No such file or directory) [dll] load: couldn't find backend `geniusvp2' (No such file or directory) [dll] load: searching backend `epkowa' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-epkowa.so.1' [dll] load: couldn't open `/usr/lib/sane/libsane-epkowa.so.1' (No such file or directory) [dll] load: couldn't find backend `epkowa' (No such file or directory) [dll] sane_get_devices: found 1 devices [dll] sane_open: trying to open `hpaio:/usb/PSC_2200_Series?serial=MY283D26QH0G' scanimage: open of device hpaio:/usb/PSC_2200_Series?serial=MY283D26QH0G failed: Error during device I/O [dll] sane_exit: exiting [dll] sane_exit: calling backend `hpaio's exit function [dll] sane_exit: finished [EMAIL PROTECTED]:~$ tail /var/log/syslog [ snip... ] Dec 18 15:28:28 gateway hpiod: unable to read MlcReverseCmd header: Resource temporarily unavailable Dec 18 15:28:28 gateway hpiod: invalid MlcCredit from peripheral, trying miser Dec 18 15:29:13 gateway hpiod: unable to read MlcReverseCmd header: Resource temporarily unavailable Dec 18 15:29:13 gateway hpiod: invalid MlcCredit from peripheral Dec 18 15:29:14 gateway hpiod: device cleanup uri=hp:/usb/PSC_2200_Series?serial=MY283D26QH0G Any ideas what's going wrong here, or what I could do to work around the problem? Thanks Will ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ HPLIP-Help mailing list HPLIP-Help@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/hplip-help
