HI I just joined the list ans am fairly solid using Linux I had been using the
HPOJ drivers until I up graded to fedora 6 but now they won't compile right
away so I tried the latest install package for HPLIP but it is still having a
problem with my PSC2110. THe PC set up is a smp 2GHz athalon with 3 Gig ram
on board usb 1 and pci card usb 2 I have tried both usb 1 and 2 ports with
same results I have also tried the 1.6.10 version of HPLIP from the fedora
repo. Below was every test that I could think of or found from other trouble
shooting threads in the forum that seem relevent to getting the scanner to
function on a MFD.
I only saw one very similar problem but it was for a different model and
distribution and not resolved yet Re: Scanning problem
From: Will Hawes <[EMAIL PROTECTED]> - 2006-12-20 00:31
I seem to always get
failed: Error during device I/O
with export SANE_DEBUG_DLL=128
scanimage -l
tail -f /var/log/messages
hp-info
hp-check
Dual Athlon MP system 3 gig ram
Kernel 2.6.18-1.2868.fc6
HP PSC 2110 USB 1.1 conection to mother board or usb 2 conection throough pci
card yielded same results also same result with version 1.6.10
HPLIP 1.6.12 and also HPLIP 1.6.10 from fedora extras repo
[EMAIL PROTECTED] ~]# scanimage -l
[sanei_debug] Setting debug level of dll to 128.
[dll] sane_init: SANE dll backend version 1.0.12 from sane-backends 1.0.18
[dll] sane_init: reading dll.conf
[dll] add_backend: adding backend `hpaio'
[dll] sane_get_devices
[dll] load: searching backend `hpaio' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-hpaio.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-hpaio.so.1'
[dll] init: initializing backend `hpaio'
[dll] init: backend `hpaio' is version 1.0.6
[dll] sane_get_devices: found 1 devices
[dll] sane_open: trying to open
`hpaio:/usb/PSC_2100_Series?serial=MY26HC63030F'
scanimage: open of device hpaio:/usb/PSC_2100_Series?serial=MY26HC63030F
failed: Error during device I/O
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `hpaio's exit function
[dll] sane_exit: finished
[EMAIL PROTECTED] ~]#
[EMAIL PROTECTED] ~]# scanimage -L
[sanei_debug] Setting debug level of dll to 128.
[dll] sane_init: SANE dll backend version 1.0.12 from sane-backends 1.0.18
[dll] sane_init: reading dll.conf
[dll] add_backend: adding backend `hpaio'
[dll] sane_get_devices
[dll] load: searching backend `hpaio' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-hpaio.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-hpaio.so.1'
[dll] init: initializing backend `hpaio'
[dll] init: backend `hpaio' is version 1.0.6
[dll] sane_get_devices: found 1 devices
device `hpaio:/usb/PSC_2100_Series?serial=MY26HC63030F' is a Hewlett-Packard
PSC_2100_Series all-in-one
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `hpaio's exit function
[dll] sane_exit: finished
[EMAIL PROTECTED] ~]# tail -f /var/log/messages
Jan 1 19:30:05 localhost hpiod: unable to read MlcReverseCmd header: Resource
temporarily unavailable
Jan 1 19:30:05 localhost hpiod: invalid MlcCredit from peripheral
Jan 1 19:30:05 localhost hpiod: channel cleanup ci=1
Jan 1 19:30:05 localhost hpiod: channel cleanup ci=2
Jan 1 19:30:06 localhost hpiod: device cleanup
uri=hp:/usb/PSC_2100_Series?serial=MY26HC63030F
Jan 1 19:31:13 localhost hpiod: unable to read MlcReverseCmd header: Resource
temporarily unavailable
Jan 1 19:31:13 localhost hpiod: invalid MlcCredit from peripheral, trying
miser
Jan 1 19:31:58 localhost hpiod: unable to read MlcReverseCmd header: Resource
temporarily unavailable
Jan 1 19:31:58 localhost hpiod: invalid MlcCredit from peripheral
Jan 1 19:31:59 localhost hpiod: device cleanup
uri=hp:/usb/PSC_2100_Series?serial=MY26HC63030F
[EMAIL PROTECTED] ~]# hp-info
HP Linux Imaging and Printing System (ver. 1.6.12)
Device Information Utility ver. 3.4
Copyright (c) 2003-6 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Using device: hp:/usb/PSC_2100_Series?serial=MY26HC63030F
hp:/usb/PSC_2100_Series?serial=MY26HC63030F
Device Parameters (dynamic data):
Parameter Value(s)
----------------------------
----------------------------------------------------------
3bit-status-code 24
3bit-status-name NoFault
agent1-ack False
agent1-desc Black cartridge
agent1-dvc 0
agent1-health 0
agent1-health-desc Good/OK
agent1-hp-ink False
agent1-id 9
agent1-kind 3
agent1-known False
agent1-level 83
agent1-level-trigger 0
agent1-sku 56 (C6656A) / 27 (C8727A)
agent1-type 1
agent1-virgin False
agent2-ack False
agent2-desc Tri-color cartridge
agent2-dvc 0
agent2-health 0
agent2-health-desc Good/OK
agent2-hp-ink False
agent2-id 10
agent2-kind 3
agent2-known False
agent2-level 17
agent2-level-trigger 0
agent2-sku 57 (C6657A) / 28 (C8728A)
agent2-type 2
agent2-virgin False
agent3-ack False
agent3-desc Photo cartridge
agent3-dvc 0
agent3-health 1
agent3-health-desc Not installed
agent3-hp-ink False
agent3-id 0
agent3-kind 3
agent3-known False
agent3-level 0
agent3-level-trigger 7
agent3-sku 58 (C6658A)
agent3-type 3
agent3-virgin False
back-end hp
cups-printer MyPSC_2100
cups-uri hp:/usb/PSC_2100_Series?serial=MY26HC63030F
dev-file
device-state 1
device-uri hp:/usb/PSC_2100_Series?serial=MY26HC63030F
deviceid MFG:Hewlett-Packard;MDL:PSC 2100
Series;CMD:MLC,PCL,PML,DW-PCL,DYN;CLS:PRINTER;1284.4DL:4d,
4e,1;SN:MY26HC63030F;S:0380008084021000002c1480053c2500011
;AiO:0;
duplexer 0
error-state 0
host
in-tray1 True
in-tray2 False
is-hp True
media-path 3
panel 1
panel-line1 1 Copy / 100%
panel-line2
photo-tray 0
port 1
r 0
revision 3
rg 000
rr 000000
rs 000000000
scan-uri hpaio:/usb/PSC_2100_Series?serial=MY26HC63030F
serial MY26HC63030F
status-code 1000
status-desc The printer is idle.
supply-door 0
top-door 1
Model Parameters (static data):
Parameter Value(s)
----------------------------
----------------------------------------------------------
align-type 1
clean-type 1
color-cal-type 0
copy-type 0
embedded-server-type 0
fax-type 0
fw-download 0
icon default_psc.png
io-control 0
io-mfp-mode 2
io-mode 1
io-scan-port 0
io-support 2
linefeed-cal-type 0
model PSC_2100_Series
model-ui HP PSC 2100 series
model1 PSC 2105
model2 PSC 2108
model3 PSC 2115
panel-check-type 1
pcard-type 1
pq-diag-type 0
r-type 0
r0-agent1-kind 3
r0-agent1-sku 56 (C6656A) / 27 (C8727A)
r0-agent1-type 1
r0-agent2-kind 3
r0-agent2-sku 57 (C6657A) / 28 (C8728A)
r0-agent2-type 2
r0-agent3-kind 3
r0-agent3-sku 58 (C6658A)
r0-agent3-type 3
scan-style 1
scan-type 1
status-battery-check 0
status-dynamic-counters 0
status-type 2
support-released 1
support-type 2
support-ver 0.9.5
tech-class DJ9xxVIP
tech-type 2
Status History (most recent first):
Date/Time Code Status Description User
Job ID
-------------------- ----- ----------------------------------------
-------- --------
01/01/2007 19:39:16 1000 The printer is idle. root
01/01/2007 19:31:58 2002 Scan job failed. root
01/01/2007 19:27:27 501 Print job has completed. root
2
01/01/2007 19:26:10 500 The printer has started a print job. root
2
01/01/2007 19:26:10 1000 The printer is idle. root
[EMAIL PROTECTED] ~]# hp-check
HP Linux Imaging and Printing System (ver. 1.6.12)
Dependency/Version Check Utility ver. 5.2
Copyright (c) 2003-6 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
---------------
| SYSTEM INFO |
---------------
Basic system information:
Linux localhost.localdomain 2.6.18-1.2868.fc6 #1 SMP Fri Dec 15 17:32:54 EST
2006 i686 athlon i386 GNU/Linux
Detected distro (/etc/issue):
fedora 6
Detected distro (lsb_release):
FedoraCore 6 (Zod)
Currently installed HPLIP version...
HPLIP 1.6.12 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf
[hpiod]
# port=0 (dynamic IP port)
port=2208
[hpssd]
# port=0 (dynamic IP port)
port=2207
[hplip]
version=1.6.12
jdprobe=0
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
doc=/usr/share/doc/hplip-1.6.12
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=1
pp-build=0
gui-build=1
scanner-build=1
fax-build=1
installinitd=/usr/lib/lsb/install_initd
chkconfig=/sbin/chkconfig
internal-tag=1.6.12.15
HPLIP running?
Yes, HPLIP is running (OK).
HPOJ running?
No, HPOJ is not running (OK).
Checking Python version...
OK, version 2.4.4 installed
Checking PyQt version...
OK, version 3.16 installed.
Checking SIP version...
OK, Version 4.4.5 installed
----------------
| DEPENDENCIES |
----------------
Checking for dependency libcrypto - OpenSSL cryptographic library...
OK, found.
Checking for dependency gcc - GNU Project C and C++ Compiler...
OK, found.
Checking for dependency SANE - Scanning library...
OK, found.
Checking for dependency GhostScript - PostScript and PDF language interpreter
and previewer...
OK, found.
Checking for dependency libjpeg - JPEG library...
OK, found.
Checking for dependency libpthread - POSIX threads library...
OK, found.
Checking for dependency make - GNU make utility to maintain groups of
programs...
OK, found.
Checking for dependency python-devel - Python development files...
OK, found.
Checking for dependency Reportlab - PDF library for Python...
OK, found.
Checking for dependency PyQt - Qt interface for Python...
OK, found.
Checking for dependency cups-devel- Common Unix Printing System development
files...
OK, found.
Checking for dependency ppdev - Parallel port support kernel module....
OK, found.
Checking for dependency libusb - USB library...
OK, found.
Checking for dependency scanimage - Shell scanning program...
OK, found.
Checking for dependency libnetsnmp-devel - SNMP networking library development
files...
OK, found.
Checking for dependency Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency LSB - Linux Standard Base support...
OK, found.
Checking for dependency xsane - Graphical scanner frontend for SANE...
OK, found.
Checking for dependency cups - Common Unix Printing System...
OK, found.
Checking for dependency Python 2.3 or greater - Required for fax
functionality...
OK, found.
----------------------
| INSTALLED PRINTERS |
----------------------
MyPSC_2100
----------
Device URI: hp:/usb/PSC_2100_Series?serial=MY26HC63030F
Installed in HPLIP? Yes
PPD: /etc/cups/ppd/MyPSC_2100.ppd
PPD Description: HP PSC 2110 Foomatic/hpijs (recommended)
Printer status: printer MyPSC_2100 is idle. enabled since Mon 01 Jan 2007
07:27:27 PM EST
----------------------
| SANE CONFIGURATION |
----------------------
'hpaio' in /etc/sane.d/dll.conf'...
OK, found. SANE backend 'hpaio' is properly set up.
Checking output of 'scanimage -L'...
[sanei_debug] Setting debug level of dll to 128.
[dll] sane_init: SANE dll backend version 1.0.12 from sane-backends 1.0.18
[dll] sane_init: reading dll.conf
[dll] add_backend: adding backend `hpaio'
[dll] sane_get_devices
[dll] load: searching backend `hpaio' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-hpaio.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-hpaio.so.1'
[dll] init: initializing backend `hpaio'
[dll] init: backend `hpaio' is version 1.0.6
[dll] sane_get_devices: found 1 devices
device `hpaio:/usb/PSC_2100_Series?serial=MY26HC63030F' is a Hewlett-Packard
PSC_2100_Series all-in-one
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `hpaio's exit function
[dll] sane_exit: finished
---------------------
| PYTHON EXTENSIONS |
---------------------
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
No errors detected.
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
HPLIP-Help mailing list
HPLIP-Help@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/hplip-help
