Can you run: SANE_DEBUG_HPAIO=8 xsane >& sane_log.txt
then: lspci -v | grep HCI Also what kind of PC or motherboard are you using? Thanks. Aaron On 1/1/07, jdp <[EMAIL PROTECTED]> wrote: > Hi all, > I am having a problem with the HPLIP programs in that the scanner on my > HP2110 does not function > > I only saw one similar problem but it was for a different model and > distribution and not resolved yet Re: Scanning problem > From: Will Hawes <[EMAIL PROTECTED]> - 2006-12-20 00:31 > > I had the same problem before on Fedora 5 but just gave up and installed HPOJ > instead > but nor that is not in the repository so I would like to try and figure out > why this > is not working on Fedora 6 below is all the print outs I could think to run. > > I seem to always get > failed: Error during device I/O > > with export SANE_DEBUG_DLL=128 > scanimage -l > tail -f /var/log/messages > hp-info > hp-check > > > Dual Athlon MP system 3 gig ram > Kernel 2.6.18-1.2868.fc6 > HP PSC 2110 USB 1.1 conection to mother board or usb 2 conection throough pci > card yielded same results also same result with version 1.6.10 > HPLIP 1.6.12 and also HPLIP 1.6.10 from fedora extras repo > > > > [EMAIL PROTECTED] ~]# scanimage -l > [sanei_debug] Setting debug level of dll to 128. > [dll] sane_init: SANE dll backend version 1.0.12 from sane-backends 1.0.18 > [dll] sane_init: reading dll.conf > [dll] add_backend: adding backend `hpaio' > [dll] sane_get_devices > [dll] load: searching backend `hpaio' in `/usr/lib/sane' > [dll] load: trying to load `/usr/lib/sane/libsane-hpaio.so.1' > [dll] load: dlopen()ing `/usr/lib/sane/libsane-hpaio.so.1' > [dll] init: initializing backend `hpaio' > [dll] init: backend `hpaio' is version 1.0.6 > [dll] sane_get_devices: found 1 devices > [dll] sane_open: trying to open > `hpaio:/usb/PSC_2100_Series?serial=MY26HC63030F' > scanimage: open of device hpaio:/usb/PSC_2100_Series?serial=MY26HC63030F > failed: Error during device I/O > [dll] sane_exit: exiting > [dll] sane_exit: calling backend `hpaio's exit function > [dll] sane_exit: finished > [EMAIL PROTECTED] ~]# > > [EMAIL PROTECTED] ~]# scanimage -L > [sanei_debug] Setting debug level of dll to 128. > [dll] sane_init: SANE dll backend version 1.0.12 from sane-backends 1.0.18 > [dll] sane_init: reading dll.conf > [dll] add_backend: adding backend `hpaio' > [dll] sane_get_devices > [dll] load: searching backend `hpaio' in `/usr/lib/sane' > [dll] load: trying to load `/usr/lib/sane/libsane-hpaio.so.1' > [dll] load: dlopen()ing `/usr/lib/sane/libsane-hpaio.so.1' > [dll] init: initializing backend `hpaio' > [dll] init: backend `hpaio' is version 1.0.6 > [dll] sane_get_devices: found 1 devices > device `hpaio:/usb/PSC_2100_Series?serial=MY26HC63030F' is a Hewlett-Packard > PSC_2100_Series all-in-one > [dll] sane_exit: exiting > [dll] sane_exit: calling backend `hpaio's exit function > [dll] sane_exit: finished > > [EMAIL PROTECTED] ~]# tail -f /var/log/messages > Jan 1 19:30:05 localhost hpiod: unable to read MlcReverseCmd header: Resource > temporarily unavailable > Jan 1 19:30:05 localhost hpiod: invalid MlcCredit from peripheral > Jan 1 19:30:05 localhost hpiod: channel cleanup ci=1 > Jan 1 19:30:05 localhost hpiod: channel cleanup ci=2 > Jan 1 19:30:06 localhost hpiod: device cleanup > uri=hp:/usb/PSC_2100_Series?serial=MY26HC63030F > Jan 1 19:31:13 localhost hpiod: unable to read MlcReverseCmd header: Resource > temporarily unavailable > Jan 1 19:31:13 localhost hpiod: invalid MlcCredit from peripheral, trying > miser > Jan 1 19:31:58 localhost hpiod: unable to read MlcReverseCmd header: Resource > temporarily unavailable > Jan 1 19:31:58 localhost hpiod: invalid MlcCredit from peripheral > Jan 1 19:31:59 localhost hpiod: device cleanup > uri=hp:/usb/PSC_2100_Series?serial=MY26HC63030F > [EMAIL PROTECTED] ~]# hp-info > > HP Linux Imaging and Printing System (ver. 1.6.12) > Device Information Utility ver. 3.4 > > Copyright (c) 2003-6 Hewlett-Packard Development Company, LP > This software comes with ABSOLUTELY NO WARRANTY. > This is free software, and you are welcome to distribute it > under certain conditions. See COPYING file for more details. > > Using device: hp:/usb/PSC_2100_Series?serial=MY26HC63030F > > hp:/usb/PSC_2100_Series?serial=MY26HC63030F > > Device Parameters (dynamic data): > Parameter Value(s) > ---------------------------- > ---------------------------------------------------------- > 3bit-status-code 24 > 3bit-status-name NoFault > agent1-ack False > agent1-desc Black cartridge > agent1-dvc 0 > agent1-health 0 > agent1-health-desc Good/OK > agent1-hp-ink False > agent1-id 9 > agent1-kind 3 > agent1-known False > agent1-level 83 > agent1-level-trigger 0 > agent1-sku 56 (C6656A) / 27 (C8727A) > agent1-type 1 > agent1-virgin False > agent2-ack False > agent2-desc Tri-color cartridge > agent2-dvc 0 > agent2-health 0 > agent2-health-desc Good/OK > agent2-hp-ink False > agent2-id 10 > agent2-kind 3 > agent2-known False > agent2-level 17 > agent2-level-trigger 0 > agent2-sku 57 (C6657A) / 28 (C8728A) > agent2-type 2 > agent2-virgin False > agent3-ack False > agent3-desc Photo cartridge > agent3-dvc 0 > agent3-health 1 > agent3-health-desc Not installed > agent3-hp-ink False > agent3-id 0 > agent3-kind 3 > agent3-known False > agent3-level 0 > agent3-level-trigger 7 > agent3-sku 58 (C6658A) > agent3-type 3 > agent3-virgin False > back-end hp > cups-printer MyPSC_2100 > cups-uri hp:/usb/PSC_2100_Series?serial=MY26HC63030F > dev-file > device-state 1 > device-uri hp:/usb/PSC_2100_Series?serial=MY26HC63030F > deviceid MFG:Hewlett-Packard;MDL:PSC 2100 > > Series;CMD:MLC,PCL,PML,DW-PCL,DYN;CLS:PRINTER;1284.4DL:4d, > > 4e,1;SN:MY26HC63030F;S:0380008084021000002c1480053c2500011 > ;AiO:0; > duplexer 0 > error-state 0 > host > in-tray1 True > in-tray2 False > is-hp True > media-path 3 > panel 1 > panel-line1 1 Copy / 100% > panel-line2 > photo-tray 0 > port 1 > r 0 > revision 3 > rg 000 > rr 000000 > rs 000000000 > scan-uri hpaio:/usb/PSC_2100_Series?serial=MY26HC63030F > serial MY26HC63030F > status-code 1000 > status-desc The printer is idle. > supply-door 0 > top-door 1 > > Model Parameters (static data): > Parameter Value(s) > ---------------------------- > ---------------------------------------------------------- > align-type 1 > clean-type 1 > color-cal-type 0 > copy-type 0 > embedded-server-type 0 > fax-type 0 > fw-download 0 > icon default_psc.png > io-control 0 > io-mfp-mode 2 > io-mode 1 > io-scan-port 0 > io-support 2 > linefeed-cal-type 0 > model PSC_2100_Series > model-ui HP PSC 2100 series > model1 PSC 2105 > model2 PSC 2108 > model3 PSC 2115 > panel-check-type 1 > pcard-type 1 > pq-diag-type 0 > r-type 0 > r0-agent1-kind 3 > r0-agent1-sku 56 (C6656A) / 27 (C8727A) > r0-agent1-type 1 > r0-agent2-kind 3 > r0-agent2-sku 57 (C6657A) / 28 (C8728A) > r0-agent2-type 2 > r0-agent3-kind 3 > r0-agent3-sku 58 (C6658A) > r0-agent3-type 3 > scan-style 1 > scan-type 1 > status-battery-check 0 > status-dynamic-counters 0 > status-type 2 > support-released 1 > support-type 2 > support-ver 0.9.5 > tech-class DJ9xxVIP > tech-type 2 > > Status History (most recent first): > Date/Time Code Status Description User > Job ID > -------------------- ----- ---------------------------------------- > -------- -------- > 01/01/2007 19:39:16 1000 The printer is idle. root > 01/01/2007 19:31:58 2002 Scan job failed. root > 01/01/2007 19:27:27 501 Print job has completed. root > 2 > 01/01/2007 19:26:10 500 The printer has started a print job. root > 2 > 01/01/2007 19:26:10 1000 The printer is idle. root > > [EMAIL PROTECTED] ~]# hp-check > > HP Linux Imaging and Printing System (ver. 1.6.12) > Dependency/Version Check Utility ver. 5.2 > > Copyright (c) 2003-6 Hewlett-Packard Development Company, LP > This software comes with ABSOLUTELY NO WARRANTY. > This is free software, and you are welcome to distribute it > under certain conditions. See COPYING file for more details. > > > --------------- > | SYSTEM INFO | > --------------- > > Basic system information: > Linux localhost.localdomain 2.6.18-1.2868.fc6 #1 SMP Fri Dec 15 17:32:54 EST > 2006 i686 athlon i386 GNU/Linux > > Detected distro (/etc/issue): > fedora 6 > > Detected distro (lsb_release): > FedoraCore 6 (Zod) > > Currently installed HPLIP version... > HPLIP 1.6.12 currently installed in '/usr/share/hplip'. > > Current contents of '/etc/hp/hplip.conf' file: > # hplip.conf > > [hpiod] > # port=0 (dynamic IP port) > port=2208 > [hpssd] > # port=0 (dynamic IP port) > port=2207 > > [hplip] > version=1.6.12 > jdprobe=0 > > [dirs] > home=/usr/share/hplip > run=/var/run > ppd=/usr/share/ppd/HP > doc=/usr/share/doc/hplip-1.6.12 > > # Following values are determined at configure time and cannot be changed. > [configure] > network-build=1 > pp-build=0 > gui-build=1 > scanner-build=1 > fax-build=1 > installinitd=/usr/lib/lsb/install_initd > chkconfig=/sbin/chkconfig > internal-tag=1.6.12.15 > > > HPLIP running? > Yes, HPLIP is running (OK). > > HPOJ running? > No, HPOJ is not running (OK). > > Checking Python version... > OK, version 2.4.4 installed > > Checking PyQt version... > OK, version 3.16 installed. > > Checking SIP version... > OK, Version 4.4.5 installed > > ---------------- > | DEPENDENCIES | > ---------------- > > > Checking for dependency libcrypto - OpenSSL cryptographic library... > OK, found. > > Checking for dependency gcc - GNU Project C and C++ Compiler... > OK, found. > > Checking for dependency SANE - Scanning library... > OK, found. > > Checking for dependency GhostScript - PostScript and PDF language interpreter > and previewer... > OK, found. > > Checking for dependency libjpeg - JPEG library... > OK, found. > > Checking for dependency libpthread - POSIX threads library... > OK, found. > > Checking for dependency make - GNU make utility to maintain groups of > programs... > OK, found. > > Checking for dependency python-devel - Python development files... > OK, found. > > Checking for dependency Reportlab - PDF library for Python... > OK, found. > > Checking for dependency PyQt - Qt interface for Python... > OK, found. > > Checking for dependency cups-devel- Common Unix Printing System development > files... > OK, found. > > Checking for dependency ppdev - Parallel port support kernel module.... > OK, found. > > Checking for dependency libusb - USB library... > OK, found. > > Checking for dependency scanimage - Shell scanning program... > OK, found. > > Checking for dependency libnetsnmp-devel - SNMP networking library development > files... > OK, found. > > Checking for dependency Python 2.2 or greater - Python programming language... > OK, found. > > Checking for dependency LSB - Linux Standard Base support... > OK, found. > > Checking for dependency xsane - Graphical scanner frontend for SANE... > OK, found. > > Checking for dependency cups - Common Unix Printing System... > OK, found. > > Checking for dependency Python 2.3 or greater - Required for fax > functionality... > OK, found. > > > ---------------------- > | INSTALLED PRINTERS | > ---------------------- > > > MyPSC_2100 > ---------- > Device URI: hp:/usb/PSC_2100_Series?serial=MY26HC63030F > Installed in HPLIP? Yes > PPD: /etc/cups/ppd/MyPSC_2100.ppd > PPD Description: HP PSC 2110 Foomatic/hpijs (recommended) > Printer status: printer MyPSC_2100 is idle. enabled since Mon 01 Jan 2007 > 07:27:27 PM EST > > > > ---------------------- > | SANE CONFIGURATION | > ---------------------- > > 'hpaio' in /etc/sane.d/dll.conf'... > OK, found. SANE backend 'hpaio' is properly set up. > > Checking output of 'scanimage -L'... > [sanei_debug] Setting debug level of dll to 128. > [dll] sane_init: SANE dll backend version 1.0.12 from sane-backends 1.0.18 > [dll] sane_init: reading dll.conf > [dll] add_backend: adding backend `hpaio' > [dll] sane_get_devices > [dll] load: searching backend `hpaio' in `/usr/lib/sane' > [dll] load: trying to load `/usr/lib/sane/libsane-hpaio.so.1' > [dll] load: dlopen()ing `/usr/lib/sane/libsane-hpaio.so.1' > [dll] init: initializing backend `hpaio' > [dll] init: backend `hpaio' is version 1.0.6 > [dll] sane_get_devices: found 1 devices > device `hpaio:/usb/PSC_2100_Series?serial=MY26HC63030F' is a Hewlett-Packard > PSC_2100_Series all-in-one > [dll] sane_exit: exiting > [dll] sane_exit: calling backend `hpaio's exit function > [dll] sane_exit: finished > > > --------------------- > | PYTHON EXTENSIONS | > --------------------- > > Checking 'cupsext' CUPS extension... > OK, found. > > Checking 'pcardext' Photocard extension... > OK, found. > > > No errors detected. > > > > ------------------------------------------------------------------------- > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to share your > opinions on IT & business topics through brief surveys - and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > _______________________________________________ > HPLIP-Help mailing list > HPLIP-Help@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/hplip-help > -- I don't care, I'm still free. You can't take the sky from me. - "Firefly" ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ HPLIP-Help mailing list HPLIP-Help@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/hplip-help
