I'm using hplip for printing and scanning to/from my HP Photosmart C5180.
With hplip 1.6.10 I could share the scanner of the Photosmart over the
network (saned provided access ot the scanner and the hpaio-backend);
everything worked fine. After upgrading from 1.6.10 to 1.6.12 this setup
does not work any more. I can still scan locally on the server the printer
is connected to (scanimage -L shows me the printer/scanner). But saned does
not provide access to the scanner any more.
Here is the debug-output if saned:
[saned] main: starting debug mode (level 8)
[saned] main: trying to get port for service `sane' (getservbyname)
[saned] main: port is 6566
[saned] main: socket ()
[saned] main: setsockopt ()
[saned] main: bind ()
[saned] main: listen ()
[saned] main: waiting for control connection
[saned] saned from sane-backends 1.0.18 ready
[saned] check_host: access by remote host: 192.168.2.16
[saned] check_host: remote host is not IN_LOOPBACK
[saned] check_host: local hostname: dk2
[saned] check_host: local hostname (from DNS): dk2.home.local
[saned] check_host: local host address (from DNS): 192.168.2.13
[saned] check_host: remote host doesn't have same addr as local
[saned] check_host: opening config file: /etc/hosts.equiv
[saned] check_host: can't open config file: /etc/hosts.equiv (No such file
or directory)
[saned] check_host: opening config file: saned.conf
[saned] check_host: config file line: `#'
[saned] check_host: config file line: `# saned.conf'
[saned] check_host: config file line: `#'
[saned] check_host: config file line: `# The contents of the saned.conf
file is a list of host names, IP'
[saned] check_host: config file line: `# addresses or IP subnets (CIDR
notation) that are permitted to use local'
[saned] check_host: config file line: `# SANE devices. IPv6 addresses must
be enclosed in brackets, and should'
[saned] check_host: config file line: `# always be specified in their
compressed form.'
[saned] check_host: config file line: `#'
[saned] check_host: config file line: `# The hostname matching is not
case-sensitive.'
[saned] check_host: config file line: `#'
[saned] check_host: config file line: `#scan-client.somedomain.firm'
[saned] check_host: config file line: `#192.168.0.1'
[saned] check_host: config file line: `#192.168.0.1/29'
[saned] check_host: config file line: `#[2001:7a8:185e::42:12]'
[saned] check_host: config file line: `#[2001:7a8:185e::42:12]/64'
[saned] check_host: config file line: `'
[saned] check_host: config file line: `+'
[saned] check_host: access accepted from any host (`+')
[saned] init: access granted
[saned] init: access granted to [EMAIL PROTECTED]
[saned] process_request: waiting for request
[saned] process_request: got request 1
[saned] process_request: waiting for request
[saned] process_request: got request 10
[saned] quit: exiting
This shows that the client is able to connect to the sane-server, but it
cannot find any scanner (which worked before in hplip 1.6.10).
Btw, I compiled hplip from the official Gentoo-ebuild.
Is there a way I can get scanning over the net to work again?
Thanks, Dan
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
HPLIP-Help mailing list
HPLIP-Help@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/hplip-help
