Ed,

I'm not seeing an error per se.  Can you run cups in debug mode and send the
cups log?  I'm assuming that the problem you are having is that you are
unable to print? Also please run hp-check and post that as well.

To put cups into debug mode edit the /etc/cups/cupsd.conf file change
loglevel to debug save/exit, restart cups (/etc/init.d/cupsys restart)
finally run tail -f /var/log/cups/error_log and print and send the log.

A

On 5/28/07, Ed Davison <[EMAIL PROTECTED]> wrote:

I have just installed hplip 1.7.4a and am receiving the following errors
        when trying to print anything:

        May 27 04:14:22 ebdhome hpiod: removing usblp driver interface=1
        for
        hp:/usb/psc_2400_series?serial=MY392D21JB6T io/hpiod/device.cpp
        504
        May 27 04:14:22 ebdhome drivers/usb/class/usblp.c: usblp0:
        removed
        May 27 04:14:33 ebdhome python: hp-testpage[11637]: note: If an
        error
        occured, or the test page failed to print, refer to the HPLIP
        website
        May 27 04:14:33 ebdhome python: hp-testpage[11637]: note: at:
        http://hplip.sourceforge.net for troubleshooting and support.

        I can reset the printer by unplugging the USB cable and plugging
        it in
        once again but the same series of errors repeats upon any print
        job
        attempt.

        I thought this was due to the usbcore and usblp modules being
        modules so
        I compiled them into the kernel and still the same messages.

        Any guidance would be great.
        --
        Ed Davison <[EMAIL PROTECTED]>


-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
HPLIP-Help mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/hplip-help




--
I don't care, I'm still free.  You can't take the sky from me. - Firefly
"Reality is merely an illusion, albeit a very persistent one." - Einstein
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
HPLIP-Help mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/hplip-help

Reply via email to