Good Day Chris I just spoke with the engineer on how hp-check trys to find packages. Essentially its asks the system for the libraries. So hp-check at this point thinks these are not on your system.
We don't test with RHEL in the lab much, but this week I have been working with RHEL5 a bit. Since I didn't have a install number or redhat network access I was using a 6 disk install media. I was also using RPM to install my packages. So...well first things first I suppose. Does hp-check finish its output? If so can you send the whole output. Also tell me about your install process. You said manual...do you remember your configure command? You could also run an 'rpm -qp | grep "your new packages"' and see if rpm thinks they are there. I'll try and find some RHEL4 disks and see if I can reproduce something here. It will take me a little bit to track those down and create a clone. Thanks so far. jh Chris Tanner wrote: > I am running RHEL 4 and I'm trying to setup a network HP Laser P3005dn. > Prior to installing, I ran up2date and installed the following packages: > net-snmp-devel-5.1.2-11.EL4.10.0.1 > PyQt-3.13.1 > PyQt-devel-3.13-1 > qt-devel-3.3.3-13.RHEL4 > sip-devel-4.1-1 > xsane-0.92-13 > > I did a manual install of hplip via the instructions online and > everything was built and installed fine. However, when I ran hp-check, I > received 10 errors: > > Checking PyQt version... > error: NOT FOUND OR FAILED TO LOAD! > > Checking SIP version... > error: SIP not installed or version not found. > > Checking for dependency: PyQt - Qt interface for Python... > error: NOT FOUND! This is a REQUIRED dependency. Please make sure that > this dependency is installed before installing or running HPLIP. > > Checking 'cupsext' CUPS extension... > error: NOT FOUND OR FAILED TO LOAD! Please reinstall HPLIP and check for > the proper installation of cupsext. > > Checking 'pcardext' Photocard extension... > error: NOT FOUND OR FAILED TO LOAD! Please reinstall HPLIP and check for > the proper installation of pcardext. > > Checking 'hpmudext' I/O extension... > error: NOT FOUND OR FAILED TO LOAD! Please reinstall HPLIP and check for > the proper installation of hpmudext. > > Checking 'scanext' SANE scanning extension... > error: NOT FOUND OR FAILED TO LOAD! Please reinstall HPLIP and check for > the proper installation of scanext. > > So, I logged out, logged back in and re-ran hp-check and received the > same errors. Are the RPMs too old for hplip or is there another package > that I am unaware of that needs to be installed? > > Thanks! > ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ HPLIP-Help mailing list HPLIP-Help@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/hplip-help
