Hello Patrick A couple things...
1. Your USB permssions don't look quite right. Did you unplug and replug your usb connection after setup? IF not then try and and retest. Let me know how it goes. 2. I'll try and reproduce this sometime this week also. Though probably not on Arch. I'll see if I can download and get the system running. jh Patrick McCarty wrote: > Hello, > > I've been having issues printing with my Deskjet D4160. I'm running > Arch Linux (fully updated as of today). I have attached my hp-check.log > as requested. And I wish to report that I've had the same issues while > using my previous distro, Ubunty 7.04 Feisty Fawn. > > Here are my observations: 1) The D4160 prints normally after a reboot > of the whole system, but only for the first print job. 2) The printer > behaves the following way on the 2nd print job and each successive one: > When a document is sent to the print queue, the printer remains idle (no > obvious physical activity) for approximately 45 seconds to 1 minute. > The printer feeds the paper about 2 inches, and then stalls for another > 15-30 seconds. Finally, the printer prints normally, finishing the > print job and performing its normal shutdown routine. Print jobs never > fail, but there are two long "stalls" in the middle of the process. > > I have tried restarting CUPS to see if that fixes the problem, but it > doesn't. I suspect this problem is related to udev, but I can't figure > it out. I've read about people having issues with permissions, but I > don't know which files to check out. > > I have a good representative snippet of the CUPS error log, set to > "LogLevel Debug", that I could attach in a future post. It is approx. > 52 KB in size. Or would it be better to paste the error log into the > body of the email? > > I can provide as many details about my system as necessary, if they are > needed to lead to a resolution. > > ---- > > Also, if this is the appropriate place for a feature request, I would > like to request an option for a 300x300 dpi resolution setting for this > printer. I use this resolution for the D4160 all the time when I print > in Windows XP, and I would be grateful if this resolution setting could > be added to the D4160s ppd. > > Thanks for your support, > > Patrick > > > ------------------------------------------------------------------------ > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Splunk Inc. > Still grepping through log files to find problems? Stop. > Now Search log events and configuration files using AJAX and a browser. > Download your FREE copy of Splunk now >> http://get.splunk.com/ > > > ------------------------------------------------------------------------ > > _______________________________________________ > HPLIP-Help mailing list > HPLIP-Help@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/hplip-help ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ HPLIP-Help mailing list HPLIP-Help@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/hplip-help
