Hello HtDig Folks
I am having some trouble with configuring htdig it
seems to be ignoring some of the servers that I have
listed using limit_urls dont know why. But if I
include the main server name, under limit_urls is does
index them
www.csv.warwick.ac.uk
but of course I get a double count.
Heres hopefully enough of the conf file to maybe
give a clue as to whats going wrong?
start_url: http://www.warwick.ac.uk/
limit_urls_to: ${start_url} http://www.astro.warwick.ac.uk/ \
http://www.bio.warwick.ac.uk/ http://www.dcs.warwick.ac.uk/ \
http://www.eng.warwick.ac.uk/ http://law.bio.warwick.ac.uk/ \
http://www.maths.warwick.ac.uk/ http://www.phys.warwick.ac.uk/ \
http://www.wbs.warwick.ac.uk/ http://www.hosp.warwick.ac.uk/ \
http://www.conferences.warwick.ac.uk/ http://www.unitemps.warwick.ac.uk/ \
#http://www.csv.warwick.ac.uk/ \
exclude_urls: /cgi-bin/ .cgi /warnes/ /templates/ /server_stats \
/logs/ /img/ \
Many thanks
Sara
Full htdig.conf attached.
--
Sara Rudd
Warwick University
#
# Example config file for ht://Dig.
#
# This configuration file is used by all the programs that make up ht://Dig.
# Please refer to the attribute reference manual for more details on what
# can be put into this file. (http://www.htdig.org/confindex.html)
# Note that most attributes have very reasonable default values so you
# really only have to add attributes here if you want to change the defaults.
#
# What follows are some of the common attributes you might want to change.
#
#
# Specify where the database files need to go. Make sure that there is
# plenty of free disk space available for the databases. They can get
# pretty big.
#
database_dir: /usr/local/htdig/db
#
# This specifies the URL where the robot (htdig) will start. You can specify
# multiple URLs here. Just separate them by some whitespace.
# The example here will cause the ht://Dig homepage and related pages to be
# indexed.
# You could also index all the URLs in a file like so:
# start_url: `${common_dir}/start.url`
#
# start_url: http://www.htdig.org/
start_url: http://www.warwick.ac.uk/
#
# This attribute limits the scope of the indexing process. The default is to
# set it to the same as the start_url above. This way only pages that are on
# the sites specified in the start_url attribute will be indexed and it will
# reject any URLs that go outside of those sites.
#
# Keep in mind that the value for this attribute is just a list of string
# patterns. As long as URLs contain at least one of the patterns it will be
# seen as part of the scope of the index.
#
limit_urls_to: ${start_url} http://www.astro.warwick.ac.uk/ \
http://www.bio.warwick.ac.uk/ http://www.dcs.warwick.ac.uk/ \
http://www.eng.warwick.ac.uk/ http://www.law.warwick.ac.uk/ \
http://www.maths.warwick.ac.uk/ http://www.phys.warwick.ac.uk/ \
http://www.wbs.warwick.ac.uk/ http://www.hosp.warwick.ac.uk/ \
http://www.conferences.warwick.ac.uk/ http://www.unitemps.warwick.ac.uk/ \
#http://www.csv.warwick.ac.uk/ \
#
# If there are particular pages that you definately do NOT want to index, you
# can use the exclude_urls attribute. The value is a list of string patterns.
# If a URL matches any of the patterns, it will NOT be indexed. This is
# useful to exclude things like virtual web trees or database accesses. By
# default, all CGI URLs will be excluded. (Note that the /cgi-bin/ convention
# may not work on your web server. Check the path prefix used on your web
# server.)
#
exclude_urls: /cgi-bin/ .cgi /warnes/ /templates/ /server_stats/ \
/logs/ /img/ \
# /~
#
# Since ht://Dig does not (and cannot) parse every document type, this
# attribute is a list of strings (extensions) that will be ignored during
# indexing. These are *only* checked at the end of a URL, whereas
# exclude_url patterns are matched anywhere.
#
bad_extensions: .wav .gz .z .sit .au .zip .tar .hqx .exe .com .gif \
.jpg .jpeg .aiff .class .map .ram .tgz .bin .rpm .mpg .mov .avi \
.ra .ram .rm .fli .flc .css .ppt .pdf \
#
# The string htdig will send in every request to identify the robot. Change
# this to your email address.
#
maintainer: [EMAIL PROTECTED]
#
# The excerpts that are displayed in long results rely on stored information
# in the index databases. The compiled default only stores 512 characters of
# text from each document (this excludes any HTML markup...) If you plan on
# using the excerpts you probably want to make this larger. The only concern
# here is that more disk space is going to be needed to store the additional
# information. Since disk space is cheap (! :-)) you might want to set this
# to a value so that a large percentage of the documents that you are going
# to be indexing are stored completely in the database. At SDSU we found
# that by setting this value to about 50k the index would get 97% of all
# documents completely and only 3% was cut off at 50k. You probably want to
# experiment with this value.
# Note that if you want to set this value low, you probably want to set the
# excerpt_show_top attribute to false so that the top excerpt_length characters
# of the document are always shown.
#
# max_head_length: 10000
max_head_length: 512
excerpt_show_top: yes
#
# To limit network connections, ht://Dig will only pull up to a certain limit
# of bytes. This prevents the indexing from dying because the server keeps
# sending information. However, several FAQs happen because people have files
# bigger than the default limit of 100KB. This sets the default a bit higher.
# (see <http://www.htdig.org/FAQ.html> for more)
#
#max_doc_size: 200000
max_doc_size: 1000000
#
# Most people expect some sort of excerpt in results. By default, if the
# search words aren't found in context in the stored excerpt, htsearch shows
# the text defined in the no_excerpt_text attribute:
# (None of the search words were found in the top of this document.)
# This attribute instead will show the top of the excerpt.
#
no_excerpt_show_top: true
#
# Depending on your needs, you might want to enable some of the fuzzy search
# algorithms. There are several to choose from and you can use them in any
# combination you feel comfortable with. Each algorithm will get a weight
# assigned to it so that in combinations of algorithms, certain algorithms get
# preference over others. Note that the weights only affect the ranking of
# the results, not the actual searching.
# The available algorithms are:
# exact
# endings
# metaphone
# prefix
# soundex
# synonyms
# By default only the "exact" algorithm is used with weight 1.
# Note that if you are going to use the endings, metaphone, soundex,
# or synonyms algorithms, you will need to run htfuzzy to generate
# the databases they use.
#
search_algorithm: exact:1 synonyms:0.5 endings:0.1
#
# The following are the templates used in the builtin search results
# The default is to use compiled versions of these files, which produces
# slightly faster results. However, uncommenting these lines makes it
# very easy to change the format of search results.
# See <http://www.htdig.org/hts_templates.html for more details.
#
# template_map: Long long ${common_dir}/long.html \
# Short short ${common_dir}/short.html
# template_name: long
#
# The following are used to change the text for the page index.
# The defaults are just boring text numbers. These images spice
# up the result pages quite a bit. (Feel free to do whatever, though)
#
next_page_text: <img src="/htdig/buttonr.gif" border="0" align="middle"
width="30" height="30" alt="next">
no_next_page_text:
prev_page_text: <img src="/htdig/buttonl.gif" border="0" align="middle"
width="30" height="30" alt="prev">
no_prev_page_text:
page_number_text: '<img src="/htdig/button1.gif" border="0" align="middle"
width="30" height="30" alt="1">' \
'<img src="/htdig/button2.gif" border="0" align="middle"
width="30" height="30" alt="2">' \
'<img src="/htdig/button3.gif" border="0" align="middle"
width="30" height="30" alt="3">' \
'<img src="/htdig/button4.gif" border="0" align="middle"
width="30" height="30" alt="4">' \
'<img src="/htdig/button5.gif" border="0" align="middle"
width="30" height="30" alt="5">' \
'<img src="/htdig/button6.gif" border="0" align="middle"
width="30" height="30" alt="6">' \
'<img src="/htdig/button7.gif" border="0" align="middle"
width="30" height="30" alt="7">' \
'<img src="/htdig/button8.gif" border="0" align="middle"
width="30" height="30" alt="8">' \
'<img src="/htdig/button9.gif" border="0" align="middle"
width="30" height="30" alt="9">' \
'<img src="/htdig/button10.gif" border="0" align="middle"
width="30" height="30" alt="10">'
#
# To make the current page stand out, we will put a border arround the
# image for that page.
#
no_page_number_text: '<img src="/htdig/button1.gif" border="2" align="middle"
width="30" height="30" alt="1">' \
'<img src="/htdig/button2.gif" border="2" align="middle"
width="30" height="30" alt="2">' \
'<img src="/htdig/button3.gif" border="2" align="middle"
width="30" height="30" alt="3">' \
'<img src="/htdig/button4.gif" border="2" align="middle"
width="30" height="30" alt="4">' \
'<img src="/htdig/button5.gif" border="2" align="middle"
width="30" height="30" alt="5">' \
'<img src="/htdig/button6.gif" border="2" align="middle"
width="30" height="30" alt="6">' \
'<img src="/htdig/button7.gif" border="2" align="middle"
width="30" height="30" alt="7">' \
'<img src="/htdig/button8.gif" border="2" align="middle"
width="30" height="30" alt="8">' \
'<img src="/htdig/button9.gif" border="2" align="middle"
width="30" height="30" alt="9">' \
'<img src="/htdig/button10.gif" border="2" align="middle"
width="30" height="30" alt="10">'
# local variables:
# mode: text
# eval: (if (eq window-system 'x) (progn (setq font-lock-keywords (list '("^#.*" .
font-lock-keyword-face) '("^[a-zA-Z][^ :]+" . font-lock-function-name-face) '("[+$]*:"
. font-lock-comment-face) )) (font-lock-mode)))
# end:
------------------------------------
To unsubscribe from the htdig mailing list, send a message to
[EMAIL PROTECTED]
You will receive a message to confirm this.
List archives: <http://www.htdig.org/mail/menu.html>
FAQ: <http://www.htdig.org/FAQ.html>
