On Thu 11-Sep-2008 at 09:09 -0700, oar wrote: > >I am trying to develop some understanding of the flow of the program >when a pano is assembled. >As far as I can tell > >(a) by setting the control points some routines produce the input for >the optimizer
You can set control points either with one of the automatic control point generators or by picking them manually in the 'Control Points tab'. >(in particular set pitch, roll and yaw for each image). No the roll, pitch and yaw is usually determined by the Optimiser based on the control points that are set. >(b) the optimizer optimizes the settings and produces the input for >nona >(c) nona produces the tiffs for input to enblend. >(d) enblend stitches the pano. -- Bruno --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/hugin-ptx -~----------~----~----~----~------~----~------~--~---
