>> >> --dmg >> > What about PTStereo? It uses X, Y, & Z to define camera position. I > have never used PTStereo so I don't know for sure how it works. > > # X10 World coordinates of camera position, only used for PTStereo > # Y200 If the camera is aligned (yaw = pitch = roll = 0.0), > # Z-13.5 X is coordinate to the right, Y vertically up and > # -Z is forward viewing direction. > > Once through PTStitcher to remove distortion and correct yaw, pitch, & > role. Then through PTStereo to correct camera position. > > From the Wiki, PTStereo needs triangles to line up the images. > PTPicker provides this interface. > http://wiki.panotools.org/PTStereo > http://wiki.panotools.org/PTPicker
This sounds interesting, and I suppose you can create a "panorama" or picture from a thought viewpoint "looking" at the created 3D model? Is this how you typically use PTStereo, or is it used for steroscopic panoramas? I don't quite get what you use the triangulation for based on the wiki. Is it to tell PTStereo what surface in Pic1 that correspons to what surface in Pic2. Say a "controll surface" is that right? Cheers --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/hugin-ptx -~----------~----~----~----~------~----~------~--~---
