I'm stitching together a 182 image panorama (no exposure levelling necessary), and I'm having a curious problem with nona. I'll put my troubleshooting steps below so you can follow along.
1. I ran a standard enblend stitch process, and nona blew the exposure of the first image out until it's nearly all white pixels. Every other image has the proper exposure. 2. I used a blended panorama with enfuse, which gives me the proper exposure on at least the first few images (I quit the process at this point). I noted in the console that nona adds the -e 14.3219 parameter to level the exposure for this process, but since enfuse is running, it would take a lot longer to process. 3. I hacked nona to always specify the -e parameter, and ran my original scenario without enfuse, and the first image is properly exposed. However, the second, third, and presumably the rest of the images are now nearly all black. 4. I un-hacked nona, recompiled, but I saved the in-process files from the last batch. I ran my original, non-enfused stitch, and replaced the overexposed first image with the properly exposed first image from the hacked nona partial stitch. I'm waiting for the results, which will probably take another 12 hours. I've searched the wiki and the list, but I can't seem to figure out what on earth nona is doing to my first image. Can anyone enlighten me? I'm running 0.8.0.3867, straight from svn. --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/hugin-ptx -~----------~----~----~----~------~----~------~--~---
