You could use Hugin to create the control points to align the images 'as best as possible'. Presumably, the images won't be taken with the exact focal length, angles, etc, so this will cause distortion between the images, but you can control the level by choosing your control points.
You then use nona to remap the images, which will result in two images with the similar geometry, as specified by the control points. Depending on how complex your masks are, you can either use Enblend with a mask file, or you can load these two images into your layered image editor of choice and do the blending by hand. For how to use it with Enblend, see http://enblend.sourceforge.net/enblend.htm . If using TIFF files, Enblend will use the alpha channels of the images. A great tutorial on this process was written by Bruno and can be found at http://hugin.sourceforge.net/tutorials/enblend-svg/en.shtml In short, "Hugin" doesn't really care one way or the other. However, Nona + Enblend/Favorite image editor will provide you a tool chain for doing this, and both Nona + Enblend are available in the Hugin binary builds. --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/hugin-ptx -~----------~----~----~----~------~----~------~--~---
