HI

The "walking around the lens" technique works well for me with an 8mm
fisheye, but not with longer lenses -- and only when I am not too near
any vertical structures.  I have had some luck holding the camera at
arms' length above my head, but well in front of it (arms pointing
about 60 degrees upward).  I have to watch the nadir point as I walk
around it, so it is hard to monitor the motions of people, traffic,
etc -- not so good for street photography.

Mostly I use a rigid monopod 8 to 10 feet high, with a level
attached.  I hold it by hand and walk around it while using the level
to keep the pole vertical.  With the 8mm lens I take 6 shots around
with the camera tilted down a little, and 1 more with it pointing
straight up.  I take care to move my shadow to different spots within
the overlap areas, as Bruno suggests, when that is necessary.  But I
try to find a shooting position where neither my shadow or the shadow
of the pole is particularly obvious. With this scheme there is just a
small hexagonal piece of the bracket at the top of the pole visible
above the nadir.  I usually clone that out, but sometimes shoot a
nadir patch, especially when the pole shadow is a problem.

When I use a tripod I always try to take the nadir shot from the
original camera position, so that nearby vertical structures will
align properly.  I must say it took me several years to learn to do
this right, taking proper account of shadow directions and the
original tripod position.  At first my feet or my shadow were always
on top of part of the tripod.  But with a little forethought I now do
pretty well most of the time.  The most important thing I've learned
about doing this out-of-doors is to hold the pole (or whatever is
supporting the camera) at right angles to the light direction.  That
puts its shadow as far as possible from the original one; and it gives
you the best chance to reposition the camera accurately:  align the
camera with your nadir point transversely (looking in the direction of
the pole) and simultaneously put its shadow back where it was.

-- Tom

> On Sat 10-Jul-2010 at 09:31 +0500, Emad ud din Butt wrote:
>
> >But Bruno I have found it really hard to allign panorama with these handheld
> >nadir shots. If nadir images are not alligned properly to ground than it
> >ruins whole panorama allignment.
>
> If you are prepared to lose some quality and gain some speed you can
> shoot with a philopod (a piece of string with a weight at the end),
> and you don't need a separate 'nadir' 
> shot:http://wiki.panotools.org/Philopod_pitch_variation
>
> >Bruno, Can you add a feature where we shoot nadir image at tilting camera
> >45degrees down & 5 feet away from nadir. Than hugin corrects it in
> >optimization. This is PTgui viewpoint correction feature. Is there any way
> >by which we can do it manually in hugin or can it be added to hugin? Even
> >this feature can help fixing handheld nadir shots you just mentioned.
>
> The current unreleased Hugin trunk does have viewpoint correction,
> but patching the nadir shot like this is a two step process with the
> way it has been implemented.
>
> If somebody is using the new XYZ viewpoint stuff for nadir patching
> could they share their workflow?
>
> --
> Bruno

-- 
You received this message because you are subscribed to the Google Groups 
"Hugin and other free panoramic software" group.
A list of frequently asked questions is available at: 
http://wiki.panotools.org/Hugin_FAQ
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at http://groups.google.com/group/hugin-ptx

Reply via email to