1st sorry for my english hello, I'm working on the same kkaminey and i finally do a panoramic view throgh command line.
can tell that autopano is a control point detector tool to create the .pto file using the images we want to join i need only free software so i used panomatic (http:// aorlinsk2.free.fr/panomatic/) instead autopano. Download/Copy the panomatic.exe into the bin folder of hugin (where are the other .exe tools of hugin). We want create a panoramic view with 3 images (Image1.png Image2.png Image3.png ) I supose that the images for the panoramic view are in the bin folder of hugin too. In each command the idea is modify the .pto file Next tip this: >>Panomatic.exe -o NameOfNewPtoArchive.pto Image1.png Image2.png Image3.png >>//Creates de initial .pto file of the panoramic view >>celeste_standalone -i NameOfNewPtoArchive.pto -o NameOfNewPtoArchive.pto // >>Cleaning control points >>ptoclean -v --output NameOfNewPtoArchive.pto NameOfNewPtoArchive.pto >>cpclean -o NameOfNewPtoArchive.pto NameOfNewPtoArchive.pto >>autooptimiser -a -l -s -m -o NameOfNewPtoArchive.pto NameOfNewPtoArchive.pto >> //Optimising positions and geometry and photometric parameters >>nona -m TIFF_m -o NameOfProject NameOfNewPtoArchive.pto //Creates the tiff >>images 0000,0001,0002 for the panoramic view >>enblend -o NameOfFinalTiffImage.tif NameOfProject0000.tif >>NameOfProject0001.tif NameOfProject0002.tif //Join the tiff images in the >>panoramic tif view Then NameOfFinalTiffImage.tif is our panoramic view Walter On 9 feb, 17:24, "[email protected]" <[email protected]> wrote: > > Did you try the other options, as stated in the wiki: "autopano-sift, > > autopano-sift-c, panomatic and match-n-shift"? > > no i didnt try that, > > > - what system are you running on? Is it windows? Which version > > windows 7 ultimate 32 bit, > > > - where did you download your version of hugin > > http://hugin.sourceforge.net/download/ > 2010 4.0., > > > - did you adapt the PATH, so your commandline/DOS-window can actually > > find the autopano's, panomatic or match-n-shift? Or are you trying to > > start the correct .exe in the correct directory? Are you trying in the > > DOS-Window? > > i am in program files\hugin\bin folder, there are a lot of exes, and i > am confused which to use and which to not, > there is no autopano, panomatic or match n sift exe present there, > > http://hugin.sourceforge.net/download/ > > On Feb 9, 6:40 pm, David Haberthür <[email protected]> wrote: > > > On Wed, Feb 9, 2011 at 14:08, [email protected] <[email protected]> wrote: > > > autopano-sift-c is not working, it says not found exe, > > > Did you try the other options, as stated in the wiki: "autopano-sift, > > autopano-sift-c, panomatic and match-n-shift"? > > > To help you better: > > - what system are you running on? Is it windows? Which version > > - where did you download your version of hugin > > - did you adapt the PATH, so your commandline/DOS-window can actually > > find the autopano's, panomatic or match-n-shift? Or are you trying to > > start the correct .exe in the correct directory? Are you trying in the > > DOS-Window? > > > Habi, perhaps other people with more experience in commandline > > stitching on windows can chime in? > > > > On Feb 9, 1:37 pm, David Haberthür <[email protected]> wrote: > > >> Hey > > > >> On Wed, Feb 9, 2011 at 03:40, [email protected] <[email protected]> > > >> wrote: > > >> > i have used the assistant part of hugin (load, align and create > > >> > panorama), > > >> > i want to do this with a bat file, i want that i dont need to click > > >> > these buttons, i want to run hugin on command prompt giving image > > >> > names and i get the output panorama, > > > >> It might be overkill to do that for only one project, but as I said, > > >> all the info is on the > > >> wiki:http://wiki.panotools.org/Panorama_scripting_in_a_nutshell > > >> You should start withhttp://is.gd/LXqzblandseewhat commands lead > > >> to the desired result (theres no ONE answer for every panorama setup > > >> you might have), then add them to a batch file for the desired result. > > >> Habi > > > >> > On Feb 8, 6:38 pm, David Haberthür <[email protected]> wrote: > > >> >> Hello kkaminey > > > >> >> On Tue, Feb 8, 2011 at 10:41, [email protected] <[email protected]> > > >> >> wrote: > > >> >> > hi, > > >> >> > i want a simple task to do, > > >> >> > i have hugin 2010 4.0, > > >> >> > i have 5 overlapping images, image1.jpg, image2.jpg, image3.jpg, > > >> >> > image4.jpg and image5.jpg, > > >> >> > i want to make a panorama of these images using a bat file > > >> >> > "makepanorama.bat", > > > >> >> > now tell me what i have to write in makepanorama.bat file, i am not > > >> >> > good in this so please write everything, > > >> >> > thanks, > > > >> >> Did you take a look at the > > >> >> wiki-page:http://wiki.panotools.org/Panorama_scripting_in_a_nutshell?Onthis > > >> >> page the whole panorama scripting is described in detail. I have no > > >> >> idea about scripting in a Windows environment (as the .bat-file > > >> >> suggests). > > >> >> If you are "not good in this", I suggest you first get the hang of > > >> >> hugin a bit. If your images are reasonably good, you should just be > > >> >> able to "Load" them on the first (assistant) tab of hugin, press > > >> >> "Align" and with "Create Panorama..." you've got your result. > > >> >> Or why do you nee to do this with a batch-file? Is it more than one > > >> >> panorama you want to stitch with the exact same parameters? If you > > >> >> tell us more, we can help more precisely. > > >> >> Cheers, Habi > > > >> > -- > > >> > You received this message because you are subscribed to the Google > > >> > Groups "Hugin and other free panoramic software" group. > > >> > A list of frequently asked questions is available > > >> > at:http://wiki.panotools.org/Hugin_FAQ > > >> > To post to this group, send email to [email protected] > > >> > To unsubscribe from this group, send email to > > >> > [email protected] > > >> > For more options, visit this group > > >> > athttp://groups.google.com/group/hugin-ptx-Hidequoted text - > > > >> - Show quoted text - > > > > -- > > > You received this message because you are subscribed to the Google Groups > > > "Hugin and other free panoramic software" group. > > > A list of frequently asked questions is available > > > at:http://wiki.panotools.org/Hugin_FAQ > > > To post to this group, send email to [email protected] > > > To unsubscribe from this group, send email to > > > [email protected] > > > For more options, visit this group > > > athttp://groups.google.com/group/hugin-ptx-Hide quoted text - > > > - Show quoted text - -- You received this message because you are subscribed to the Google Groups "Hugin and other free panoramic software" group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/hugin-ptx
