On 18/04/11 08:02, Calvin McDonald wrote: > I need someone experienced to check my expectations. > > If I ... > ) Carefully and robustly (as per these instructions > <http://hugin.sourceforge.net/tutorials/calibration/en.shtml>) obtain > distortion parameters a, b and c for my lens. > ) Provide these distortion parameters to Hugin (Load Lens). > ) Set my camera/lens/head to the exact nodal point calibration. > ) Use a high precision pano head with very accurate detents both > vertically and horizontally (w/ proper overlap). > ) Apply image yaw/pitch/roll consistent with above and load into > Hugin as a template. > > Can I expect to get successful stitches from Hugin without any control > points?
In the most optimal case, you need at least 3 control points with a neighbour on each image you want to include in the stitched result. And you should be able to "travel" from each image to every other image using control points as bridges. Cheers Simon -- You received this message because you are subscribed to the Google Groups "Hugin and other free panoramic software" group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx
