On Wed 15-Jun-2011 at 01:48 -0700, namklim wrote:
I am using a Samyang 8mm lens on a Pentax. If I load a set of images the Assistant shows lens type Normal (rectilinear) focal length 8mm. If I then select Load Lens in Assistant and load my stored .ini file for the Samyang it changes to Normal (rectilinear) focal length 3.86mm (and shows the same parameters and Lens type on the Camera and Lens tab). An align with those settings will not produce correctly stitched output. However, if I use Load Lens from the Camera and Lens tab and load the same file the correct data in loaded: Lens type Stereographic, focal length 9.53mm (shows on both Assistant and Camera and Lens tab) and the images stitch correctly.
Thanks, I think this has been reported before: https://bugs.launchpad.net/hugin/+bug/790039
It will help getting it fixed if you add your experience to the tracker report.
-- Bruno -- You received this message because you are subscribed to the Google Groups "Hugin and other free panoramic software" group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/hugin-ptx
