Hi Georg, I took some photographs of tiled walls in a tube station moving laterally along the platform and had moderate success in stitching them in GIMP or in mosaic mode of hugin after applying some deformation to the single photos using GIMP. In my case I had two types of corrections to apply: a) horizontal lines were not parallel (because the axis of the camera was not perpendicular to the wall). I corrected this with the perspective tool b) the vertical lines were curved towards the left and right hand margins. I corrected this with the curve bend filter The result was only approximative, but in my case sufficient as the original pictures were blurred anyway
Volker On Sep 23, 5:00 pm, gms76 <[email protected]> wrote: > Hello, > > I tried to make a panorama of some photos, which were taken inside a > tube. To make the photos, the camera moved lateral. The problem is, > that due to spatial distortion lines which are painted on the wall of > the tube have a pincushion distortion and hugin cannot connect them. > The reason for this extreme pincushion distortion is, that the wall of > the tube is concave and I change the position of the camera in the > longitudinal direction of the pipe. > > Is it possible to make a panorama of this pipe? > > Thank you for your help, > Georg -- You received this message because you are subscribed to the Google Groups "Hugin and other free panoramic software" group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/hugin-ptx
