I downloaded last night, and ran a set that I had shot that afternoon. I found that it did the job as per usual, except that I noticed when changing the projection from the GL window, it sometimes exited the application when I selected successive projections one after the other. Not always, though. Maybe it used to do this before, I don’t know.
When it worked, it happily blasted all eight cores of this i7-2700K hackintosh (running my purchased Lion) (16GB ram), for the parts of the procedure that use all eight cores that is. I notice that this (and prior versions) have a tendency to ‘forget’ which state I left it in when I try out the Use GPU option (which doesn’t work in OS X, but I seem to remember can work in Linux, but I’ve hardly used it more than once or so in Linux, some months ago). The GPUs I’ve attempted are the in-cpu one, the Intel HD-3000 (no-go in either OS), and the card I am actually using right now, the Asus HD-6450 silent (which as I say, I’ve seen Hugin use the GPU setting once in Linux). The thing is, in OS X, if I set it to use GPU, I get an error (this is the end part): gpu shader program compile time = 0.025 nona: Unsupported framebuffer format in: /Users/Shared/development/hugin_related/hugin-2011.4.0/mac/../src/hugin_base/vigra_ext/ImageTransformsGPU.cpp:713 gnumake: *** [PC202039-PC202076-60000.tif] Error 1 However, if I set it back to not using the GPU, it often doesn’t realise this and continues giving me this error, even next time I use it. I have to go back into the prefs a second time and click apply and OK again, and it'll work. Once it is set to work, it continues. It’s only if I try to see if the GPU now works, once every time I download a new one, that it misbehaves like this for a while. Also, what would be useful is if the PTUbatcherGIU could be quit properly — it cannot every be quit from by itself using cmd q, it always requires cmd opt esc to force quit it. This has always been the case, though. It just means that I can’t leave the computer on and have the Energy Saver schedule turn the computer off later at night, this program stops it because it can’t be quit from. On 21 December 2011 09:32, Harry van der Wolf <[email protected]> wrote: > Hi all, > > I have uploaded an "installer" bundle of 2011.4.0 (default) and a "apps in > a folder" dmg to SourceForge and removed the 2011.4.0 from my site. > > I'm a bit disappointed that 15 persons have downloaded the bundle from my > site and only one (thanks a lot Carl) took the effort to give me feedback, > despite the fact that I specifically asked for it. > > Harry > > > > 2011/12/20 Harry van der Wolf <[email protected]> > >> Hi mac users, >> >> I created a 2011.4.0 bundle. The bundle is currently downloadable from my >> site. >> Please download and please give me feedback whether it works correctly. >> As soon as I have a couple of positive reactions I can and will upload >> the bundle to SourceForge and remove it from my page. >> >> Again: Please give feedback in this thread. >> >> This bundle is a bundle containing a 2011.4.0 folder with the apps. For >> SourceForge I will place an "Installer" dmg and this dmg. >> >> >> Tiger and Lion users: Use the Tiger enblend from the enblend-enfuse-4.0 >> folder inside the .dmg. >> >> Information and binaries via my website >> <http://panorama.dyndns.org/index.php?lang=en&subject=Hugin&texttag=Hugin >> >. >> (The binaries themselves are served from hugin.panotools.org who kindly >> provide the disk space and bandwidth). >> >> Hoi, >> Harry >> > > -- > You received this message because you are subscribed to the Google Groups > "Hugin and other free panoramic software" group. > A list of frequently asked questions is available at: > http://wiki.panotools.org/Hugin_FAQ > To post to this group, send email to [email protected] > To unsubscribe from this group, send email to > [email protected] > For more options, visit this group at > http://groups.google.com/group/hugin-ptx > -- *Ian Tindale* -- You received this message because you are subscribed to the Google Groups "Hugin and other free panoramic software" group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/hugin-ptx
