On 21 Dez., 23:20, Calvin McDonald <[email protected]> wrote: > I'm needing a little driving instructions when using Hugin to combine > stacked images of bracketed exposures. > > I normally take image sets 3x12+1N+1Z. I took a set in a dark canyon, > exposed for the canyon which naturally washed out the sky. The sky is only > visible in the zenith shot and the top row of 12 images. For these 13 > images I took two shots at each position, one exposed for the dark canyon > and one for the blue sky. > > Now I'm in Hugin and fumbling around (never done this before) trying to get > it to enfuse the two exposures of the top row for me. I loaded the > standard 38 images and positioned them properly with a template. Then I > loaded the extra 13 images of the properly exposed sky and stacked them on > top of their counterpart images. > > My question is, what options do I want on the "Stitcher" tab to get it to > combine the two exposures automatically?
you'd use 'exposure fusion from stacks'. Since all the lower-row images are in 'stacks of one image', hugin may make an exposure fusion from each of these 'stacks of one images' (if I remember correctly, it really does that, to no effect whatsoever), but this should do no harm, apart from a bit of wasted time. You might be better off exposure-fusing your brackets first and then put the fused images into another pto with the lower rows and proceed to generate a normal panorama from the lot. Kay -- You received this message because you are subscribed to the Google Groups "Hugin and other free panoramic software" group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/hugin-ptx
