I'd really appreciate some assistance debugging some image stacking 
problems I have started to get.  This is using the stable hugin build 
2011.4.0.cf9be9344356.

My 3 bracketed images (+/- 0.7 EV) are of a piece of public art with plenty 
of unmoving objects in the frame.  I added about 50 CPs manually for each 
pair of images, being careful to use only high contrast sharp corners 
(e.g., windows, roof corners), yet the "distance" with fine-tuning was 
never better than about 28, which seems very high.  When I optimize the 
project for position, however, a "no feature points" message pops up and no 
optimization occurs.

Earlier, when trying this with an automatic CP detector 
(align-image-stack), and editing the CPs to restrict them to points like I 
described above, the images would align very poorly leaving me with an 
unusable stitch.

I suspect this has something to do with the camera, which is a higher end 
P&S, since my DSLR images tend to stitch together with far fewer issues 
with similar images.  Even so, the images from the P&S look very sharp, at 
least to me, so the camera may well be a just a red herring.  At any rate, 
any advice or assistance would be great.

Thanks,
Terry

-- 
You received this message because you are subscribed to the Google Groups 
"Hugin and other free panoramic software" group.
A list of frequently asked questions is available at: 
http://wiki.panotools.org/Hugin_FAQ
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at http://groups.google.com/group/hugin-ptx

Reply via email to