2013/9/25 Matthew Petroff <[email protected]> > Windows binaries for Hugin 2013.0.0-rc2 are now available. For the Python > enabled builds, one needs a preexisting Python 3.2 installation. > > I was a bit busy this summer working on Google Summer of Code for > Inkscape, and > therefore did not get around to making builds for the previous release > candidate. > In addition, I have not used Windows as my primary platform for over a > year now, > so I do not use my own builds much anymore. While I plan on producing > Windows > builds for the rest of this release cycle and will continue to do so if no > one > else takes my place, it would be nice if someone who actively uses Windows > steps > up to produce Windows builds for future release cycles. > > 32-bit Installer: > > http://sourceforge.net/projects/hugin/files/hugin/hugin-2013.0/HuginSetup_2013.0.0-rc2_32bit_Windows.exe/download > > 32-bit Installer with Python: > > http://sourceforge.net/projects/hugin/files/hugin/hugin-2013.0/HuginSetup_2013.0.0-rc2_32bit_Python_Windows.exe/download > > 64-bit Installer: > > http://sourceforge.net/projects/hugin/files/hugin/hugin-2013.0/HuginSetup_2013.0.0-rc2_64bit_Windows.exe/download > > 64-bit Installer with Python: > > http://sourceforge.net/projects/hugin/files/hugin/hugin-2013.0/HuginSetup_2013.0.0-rc2_64bit_Python_Windows.exe/download > > 32-bit 7z Archive: > > http://sourceforge.net/projects/hugin/files/hugin/hugin-2013.0/Hugin_2013.0.0-rc2_32bit_Windows.7z/download > > 32-bit 7z Archive with Python: > > http://sourceforge.net/projects/hugin/files/hugin/hugin-2013.0/Hugin_2013.0.0-rc2_32bit_Python_Windows.7z/download > > 64-bit 7z Archive: > > http://sourceforge.net/projects/hugin/files/hugin/hugin-2013.0/Hugin_2013.0.0-rc2_64bit_Windows.7z/download > > 64-bit 7z Archive with Python: > > http://sourceforge.net/projects/hugin/files/hugin/hugin-2013.0/Hugin_2013.0.0-rc2_64bit_Python_Windows.7z/download > > > -Matthew > > On Monday, September 9, 2013 3:15:03 PM UTC-4, Harry van der Wolf wrote: >> >> Hi all, >> >> Again a pretty long time between RC1 and RC2. sorry. >> >> ==============================**============= >> Hugin-2013.0 RELEASE NOTES >> >> ABOUT >> >> Hugin is more than just a panorama stitcher. >> >> Hugin can be found at >> * SourceForge: http://hugin.sourceforge.net/ >> * Launchpad: https://launchpad.net/hugin >> >> >> DOWNLOAD >> >> The 2013.0rc2 source tarball can be downloaded >> >> * from SourceForge at >> http://sourceforge.net/**projects/hugin/files/hugin/** >> hugin-2013.0/hugin-2013.0.0_**rc2.tar.bz2/download<http://sourceforge.net/projects/hugin/files/hugin/hugin-2013.0/hugin-2013.0.0_rc2.tar.bz2/download> >> >> * from Launchpad at >> https://launchpad.net/hugin/**2013.0/2013.0rc2/+download/** >> hugin-2013.0.0_rc2.tar.bz2<https://launchpad.net/hugin/2013.0/2013.0rc2/+download/hugin-2013.0.0_rc2.tar.bz2> >> >> This is a source code release. For executables see below. >> >> This tarball is equivalent to rev/changeset bbf25923d4c1 in our Mercurial >> repository, where it is also tagged 2013.0.0rc2 >> >> Verify its SHA1SUM >> 4094e76160d04b1e66ef4efd947ad1**176e6a3072 hugin-2013.0.0_rc2.tar.bz2 >> >> EXECUTABLES >> >> Users communities produce executables for their respective platforms. >> >> These executables are then added to the download section on SourceForge at >> http://sourceforge.net/**projects/hugin/files/hugin/<http://sourceforge.net/projects/hugin/files/hugin/> >> >> A number of users have built recent snapshots and executables are likely >> to be >> announced within a few days of this tarball release. >> >> Watch >> http://groups.google.com/**group/hugin-ptx<http://groups.google.com/group/hugin-ptx>for >> the announcements of binary >> releases. If you don't see a binary for your platform it has most likely >> not >> been produced yet. Consider stepping up to the task. Instructions at >> >> http://wiki.panotools.org/**Development_of_Open_Source_** >> tools#Supported_Platforms<http://wiki.panotools.org/Development_of_Open_Source_tools#Supported_Platforms> >> >> Announce your build on >> http://groups.google.com/**group/hugin-ptx<http://groups.google.com/group/hugin-ptx> >> >> >> CHANGES SINCE 2012.0.0 >> >> * The greatest change is the redesign of the (Graphical) User Interface >> (GUI). The user interface now consists of three modes: Simple, Advanced and >> Expert. >> The Simple interface is for the beginning panorama photographer and >> offers all tools to create your panorama. You can also use this mode if you >> have a simple, straightforward panorama. The Simple interface mode uses the >> "Fast Preview" window as its main workflow window. >> The Advanced interface mode offers you more options to improve your >> panorama. It uses the Panorama Editor as its main window. >> The Expert mode gives you access to all options and functions that Hugin >> has to offer. This is where you can optimize your complicated, multilayer, >> mosaic, multi-stack, you name it, panorama. It also uses the Panorama >> Editor as its main window. >> >> * The Hugin build for Mac OS X has switched from Carbon to Cocoa and is >> now fully 64bit. >> >> New tools added: >> * pto_var ( change image variables inside pto files) >> * pto_lensstack (modify assigned lenses and stack in pto files) >> * geocpset (set/add geometric constraints for multirow panorama with >> featureless images) >> >> >> Other Improvements >> * Many more improvements and bug fixes. >> >> UPGRADING >> >> Upgrading from previous versions of Hugin should be seamless. If you do >> have >> problems with old settings, these can be reset in the Preferences by >> clicking >> 'Load defaults'. >> >> It is strongly recommeded to set the default control point detector to >> Hugin's CPFind. It is the only control point generator endorsed by Hugin. >> Third-party generators may be compatible with the plug-in architecture. >> >> >> COMPILING >> >> Users compiling from source refer to the dependencies listed at >> http://wiki.panotools.org/**Development_of_Open_Source_** >> tools#Dependencies<http://wiki.panotools.org/Development_of_Open_Source_tools#Dependencies> >> >> and the build processes listed at >> http://wiki.panotools.org/**Development_of_Open_Source_** >> tools#Build_your_Own_Test_**Builds<http://wiki.panotools.org/Development_of_Open_Source_tools#Build_your_Own_Test_Builds> >> >> More information in the README and INSTALL_cmake files in the tarball. >> >> >> KNOWN ISSUES AND WORKAROUNDS >> >> There is a known problem building Hugin with CMake 2.8.5rc2. >> Workaround: Upgrade to a newer CMake version. >> >> Mac OS X: >> - Mac OS X Tiger (10.4) is no longer supported. >> - The PPC platform is no longer supported. >> - The OpenMP enabled enblend is now compatible on Mac OS X Lion (10.7). >> - The cmake compilation of Hugin is currently broken due to the fact that >> the boost library on OS X is currently at version 1.50 and boost versions >> => 1.48 >> conflict with a number of Mac OS X macros (from AssertMacros.h). This can >> not be disabled as WxWindows for Mac (a.k.a. WxMac) needs these macros. >> An XCode build, where a specific boost (<=1.46) can be specified, is >> possible. The 2013.0 OSX bundle will be based on an XCode build with boost >> 1.46. >> >> An updated list of issues deemed to be critical, including discussions >> and workarounds is in the issue tracker. >> https://bugs.launchpad.net/**hugin/+bugs?search=Search&** >> field.importance=Critical<https://bugs.launchpad.net/hugin/+bugs?search=Search&field.importance=Critical> >> >> >> THANKS >> >> Thanks to all the contributors to this release and members of the >> hugin-ptx >> mailing list, too many to mention here. >> >> Hugin can be found at http://hugin.sourceforge.net/ and at >> https://launchpad.net/hugin >> >> >> CHANGELOG >> >> A detailed changelog can be found in the file Changelog. >> > I could give it a try. I am not promising anything yet, but if there is an up-to-date procedure, I could try it.
-- Frederic Da Vitoria (davitof) Membre de l'April - « promouvoir et défendre le logiciel libre » - http://www.april.org -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/CANe_y9RWbsCPs_o76-Ek0thUfROL7Loi5xMYGvnGRmzexR9Wbw%40mail.gmail.com. For more options, visit https://groups.google.com/groups/opt_out.
