Why does the flat-scanned stitching tutorial state that "You need to stop Hugin from assuming that all the pictures were taken with the same camera"? What is the reason for that - it can take a long time changing the notional lens on each image http://hugin.sourceforge.net/tutorials/scans/en.shtml
I have an issue with the way that Hugin calculates focal length: I have a full frame sensor and the EXIF tab of the Stitcher shows the correct focal length of 50mm. But at the bottom of that screen, under lens type, my lens is shown as 38.601mm with a focal length multiplier of 1x. How did that get calculated? Any thoughts would be appreciated -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/43f36968-6ce5-4349-a7f2-6779ccca3798%40googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
