Hi Guys,
I think I found the solution. Firstly in was unnecessary to try set up yaw, pitch etc. Secondly, instead of using normal lens setting, it was better to use circular fisheye. I found 114 control points! :) Correct settings: From: Pawel Rozenek [mailto:[email protected]] Sent: 17 June 2014 18:46 To: '[email protected]' Subject: Samyang and Hugin Hi All, Someone may think that I do not like Hugin because I am complaining and complaining :) But it is not a true at all! I always use 14mm lens on FF camera but a few days ago I took MY FIRST Samyang 8mm fisheye panorama on DX camera. 6 pictures (4 x 90deg + nadir + zenith) and I stitched them in PTGUI without any problem. I only had to define yaw -180, -90, 0 & 90 and similar for pitch and roll. I used this tutorial: https://www.youtube.com/watch?v=tmNleWUDePQ and my pano is here: http://panorama360.photo/chalk-mine-in-norwich/ However, I tried to use Hugin and it does not work for me at all. Hugin found only 4 control points :( What wrong am I doing? To be honest with you the panorama alignment is quite bad, because I used a tripod and a wire with attached stone to the end. I rotated the tripod around the wire pointing at the point on the ground. It was only an experiment, however it worked well on PTGUI. Please let me know how I can do the same on Hugin. I tried to set up yaw, pitch, roll parameters in Hugin but it does not work. I saved my 6 images and Hugin’s pto and mk files here: http://www.rozenek.com/temp/pano.zip If anybody has a few spare seconds it will be great to have a small explanation what I was doing incorrectly. Thank you. --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/000601cf8a5f%246d714620%244853d260%24%40googlemail.com. For more options, visit https://groups.google.com/d/optout.
