I had a similar problem crop up while I was developing multiblend, though that had a slightly different cause. My guess at what may have happened is that, given three images in horizontal order, A B C, enblend has blended the small overlap between A and C before considering B. When it does come to add B to the composite, some parts of the blended A/C end up being included in the output image, when ideally that whole area should have been covered by B.
Another possibility is that neighbouring images overlap so much that, despite A being largely to the left of B, some parts of remapped A are off to the right of B, again giving them the chance to appear in the final composite when they should be covered up (this isn't likely in your single row pano). Those sweeping spurs at the corners of remapped fish eye images could be the cause of just such problems. Putting the images in shot order or overlapping a little less could stop the first case happening. Or you could use <a href="http://horman.net/multiblend";>multiblend</a> ;) Just a guess! David -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/2b971b9e-a3d0-45b3-b84b-aea849e60678%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
