Try changing the output size and then re-running the optimizer. You'll see that if you double the output size the estimated error will also double (assuming the same optimization). The initial numbers are for the initial default size for the output.
On Wednesday, 20 August 2014 16:52:18 UTC+1, [email protected] wrote: > > Hi all, > > Thanks for the response. I'm using Hugin-2013.0.0 for Mac OS X. > > The reported distance for the control points changed, and when I ran the > optimizer upon reopening, I received these results: > > average control point distance: 21.215626 > standard deviation: 16.718980 > maximum: 104.639822 > > That compares to an average control point distance of 2 or 3, with a > maximum of 6 prior to stitching. Is that what you were looking for, dkloi? > > On Tuesday, August 19, 2014 2:56:04 PM UTC-5, [email protected] wrote: >> >> Hi all, >> >> I've had a reoccurring issue with control points not saving properly. >> >> Here's the gist of it... After control points are added and optimized, >> I'll save the project. All is well, and it reopens just fine. However, >> after I generate a panorama and then save that exact same project, upon >> opening it again the control points change from having an average distance >> of 2.00 or less to being 15.00 or greater. >> >> Any idea as to why the distance for the control points does not save >> properly after generating the panorama? Also, any help for how to avoid >> this would be much appreciated. (It's rather frustrating and time >> consuming.) >> > -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/85536399-a405-4e21-ab9a-1a9e09c4b927%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
