Hello Terry,
On Tue, 10 Feb 2015 06:40:51 +1100, tbransco <[email protected]>
wrote:
Using hugin 2014.0.0. (win32) I just completed an 11-image panorama of a
distant mountain range (no foreground detail) that's worked out really
well
despite the lack of control points in the bottom (choppy seas) and top
third (heavily overcast skies) of the images. However, there is a small
misalignment of some coastline between two of the images toward the
centre
of the panorama. I'd add control points nearer the coastline if I could,
but there is absolutely no detail this low in the images (except boats,
which move). I did try adding a pair of new control points between these
two (fog edges, so risky), and re-optimized all images. The reported
errors were much larger than they had been originally, so I chose not to
accept the optimization and preserve what I had.
Does anyone have any suggestions for how I should be aligning these two
images after my initial panorama has been stitched, such that I don't
have to start over?
The only general advice I can offer without seeing the detail of this
project, is to do your initial stitch then save your .pto file (File ->
Save as). You can then try to make improvements, saving a new version of
your .pto if any subsequent stitch is better.
If it all goes haywire, you can simply start out where you left your first
stitch by opening your first .pto (File -> New, File->Open, then select
the .pto).
If you are still unable to get a good stitch, you could consider making
your images and your initial .pto file available (via Dropbox or similar)
and someone here will try to provide help on the project.
Cheers,
--
Regards,
Terry Duell
--
A list of frequently asked questions is available at:
http://wiki.panotools.org/Hugin_FAQ
---
You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/hugin-ptx/op.xts6ymkgrs0ygh%40localhost.localdomain.
For more options, visit https://groups.google.com/d/optout.
