On Tue, Sep 27, 2016 at 04:25:32PM -0700, Michael Havens wrote: > I did a pano of a room (not 360). I did the room in 3 or 4 shots. In the > resulting pano > (https://drive.google.com/open?id=0B2xvsVTZy4y1R2ZSQUdmaFZsTGc) you could > see the seams. If I were to do the pano with more photos than 4 would that > negate the seam or at least make them less noticeable?
I usually maintain 40% overlap between shots. This allows lots of room both for control points and for enblend to work its magic. But typically seams become visible either due to parallax, or insufficient optimization / incorrect control points. Make sure your mean control point distance is below one pixel, and if it's not, take a look at the control points that are the farthest off. --Sean -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/20160928042945.GB1896%40coach.home. For more options, visit https://groups.google.com/d/optout.
