Igor P wrote:
Hello, is there any imaging specialist that could help me? I need to align
scanned images of PCB layers to exatly match. But the scanned images has some
distortion, every image is a little stretched compared to each other and tiny
bit rotated. I have experimented with hugin but i cant succesfully set it up to
make as output aligned images.
Is there someone who would help me with this?
I wanted to overlay the component side of a (single sided) board with
the track side. I needed to use 2 techniques over and above the basic mosaic
mode
of Hugin
1) On the component side, parallax is an issue - so take the shot from as far
as you can get, using your longest lens
2) Assuming you want to view from the component side, you will need to mirror
flip the track side image; Hugin cannot do this.
Other than that, mosaic mode, and manual control points should do the task
nicely.
BugBear
--
A list of frequently asked questions is available at:
http://wiki.panotools.org/Hugin_FAQ
---
You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/hugin-ptx/5B3F2BB3.6030005%40papermule.co.uk.
For more options, visit https://groups.google.com/d/optout.
