New here and to Hugin. I have two panoramas I took with DJI Spark Drone while on vacation last summer. I've not been able to stitch them using the tool I normally use - Microsoft ICE. Thus far, I've not been able to stitch with Hugin, but admit I have a lot to learn. These 2 panos were taken over water, but it seems there should be enough contrast to find alignment points.
The photos are here https://drive.google.com/drive/folders/1AU8MjQLVXCamiaE618AstEswLEJIDotO?usp=sharing and here. https://drive.google.com/drive/folders/1Q0ZQDw6qhwie6obgbBG0d6TEJanSMrAo?usp=sharing I'd be grateful for any advice to get these stitched to the point I can decide how to render. In the meantime, I'll start to dig into the documentation and tutorials to learn how to better use Hugin. Looks to be much more feature rich than ICE. What's best place to start learning? I would assume the drone follows a set path to create the 46 photos. Is it possible to specify a 'recipe' of sorts that would make it easier, possibly faster for Hugin to do the alignment? thank you! -Bryan -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/04f77b1d-84ce-47b9-91a2-493d8c2951f2%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
