Frederic Da Vitoria wrote:
2019-02-20 9:55 UTC+01:00, bugbear <[email protected]>:
Frederic Da Vitoria wrote:
I believe horizontal control points should only be used when assembling an
actual landscape panorama, to mark the horizon itself. I never assembled
flatbed or microscope images, but I did some mosaic mode stitches. My
remark could be wrong...
I use horizontal and vertical control points routinely when sitiching mosaic
scans, most commonly on the straight edges
of rectangles (e.g. maps).
Hugin is then able to use pitch and yaw, roll to correct any perspective
distortion of the stitch, as well as using X,Y,Z
to perform the tesselation of the sub-images.
OK, good to know. Thanks. I'll try this next time I do this type of stitch.
I posted a suitable sample set (and pto file) to this list
under the subject line "Mosaic mode test set"
BugBear
--
A list of frequently asked questions is available at:
http://wiki.panotools.org/Hugin_FAQ
---
You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/hugin-ptx/5C6D30E7.8000308%40papermule.co.uk.
For more options, visit https://groups.google.com/d/optout.
