Hi, Thank you so much!
Where exactly was I going wrong in the process?: 1. I set Hugin INTERFACE to Expert. 2. ADD IMAGE: Old picture (this will be the anchor) 3. Double click on the filename. That opens up IMAGE VARIABLES. Under POSITIONS, I ensure Yaw, Pitch & Roll = 0. Hit Okay. 4. ADD IMAGE: New picture 5. Then I hit CONTROL POINTS. 6. On the Left Panel is the Old picture. On the Right I select the New Picture. 7. I match and ADD as many as 30 points between the left & right pictures. Then this is where I get lost. Am I supposed to go back to PHOTOS tab, then highlight both the New & Old pics, and hit Optimise Geometric (Positions & View) Calculate? Leave Feature Matching Setting: cpfind ? And then move to STITCHER tab, PROJECTION (Rectilinear)? Remapped Images select all three boxes and then hit STITCH? When I do that, it tells me it could not output as no images are selected. Thanks. On Sat, 17 Apr 2021 at 22:41, 'dkloi' via hugin and other free panoramic software <[email protected]> wrote: > Here's my attempt. I manually tried to match points on the building but > because there has been a lot of renovation to the frontage, as well as > large tree in the way obscuring key bits of the building, I don't expect > the match to be great. > > Daniel > > On Saturday, 17 April 2021 at 12:20:39 UTC+1 Meowly Bear wrote: > >> Hi, >> >> Here is the slightly lower res version of the two pictures, together with >> the .pti file. I'm trying to match the Capitol Theatre with the old picture >> angle. Thanks :) >> >> [image: 1 Old150.jpg] >> >> On Fri, 16 Apr 2021 at 19:45, Monkey <[email protected]> wrote: >> >>> There's quite a large difference in geometry which I think Hugin is >>> going to unable to fully correct. Can you upload your .pto file? I have a >>> video plugin that should be able to warp one image to the other using the >>> control points in the file. >>> >>> On Friday, 16 April 2021 at 11:32:34 UTC+1 Meowly Bear wrote: >>> >>>> Hi Bruno, >>>> >>>> Thank you for your reply. >>>> >>>> Unfortunately, I can't seem to make it work - probably because I'm >>>> doing this wrong. >>>> >>>> These are the two pictures. >>>> 1 Old.jpg.zip >>>> <https://drive.google.com/file/d/1xXkCHaOxk9cQddilz_UEsGJStVLM8AR7/view?usp=drive_web> >>>> 2 NewJPG.zip >>>> <https://drive.google.com/file/d/1MG7asE2rpo8lh0UETRTfar9gTlFZ4w2z/view?usp=drive_web> >>>> >>>> 1. I set Hugin INTERFACE to Expert. >>>> 2. ADD IMAGE: Old picture (this will be the anchor) >>>> 3. Double click on the filename. That opens up IMAGE VARIABLES. Under >>>> POSITIONS, I ensure Yaw, Pitch & Roll = 0. Hit Okay. >>>> 4. ADD IMAGE: New picture >>>> 5. Then I hit CONTROL POINTS. >>>> 6. On the Left Panel is the Old picture. On the Right I select the New >>>> Picture. >>>> 7. I match and ADD as many as 30 points between the left & right >>>> pictures. >>>> >>>> Then this is where I get lost. Am I supposed to go back to PHOTOS tab, >>>> then highlight both the New & Old pics, and hit Optimise Geometric >>>> (Positions & View) Calculate? >>>> Leave Feature Matching Setting: cpfind ? >>>> And then move to STITCHER tab, PROJECTION (Rectilinear)? >>>> Remapped Images select all three boxes and then hit STITCH? >>>> >>>> When I do that, it tells me it could not output as no images are >>>> selected. >>>> >>>> What am I doing wrong? Thank you in advance. >>>> >>>> >>>> On Fri, 16 Apr 2021 at 05:12, Bruno Postle <[email protected]> wrote: >>>> >>>>> On Thu 15-Apr-2021 at 10:33 -0700, Meowly Bear wrote: >>>>> > >>>>> > Just looking for a simple way to do this non-pano work. >>>>> > >>>>> > I have 2 pictures of a building taken 20 years apart. The angle of >>>>> > the newer second image doesn't exactly match the older image. >>>>> > >>>>> > I would like to insert control points in Image 2 to match the >>>>> > perspective and camera angles of the older Image 1, and output >>>>> > only the corrected newer Image 2. >>>>> >>>>> This is only going to give satisfactory results if both photos were >>>>> taken at more-or-less the same spot. >>>>> >>>>> You will need to use the Panorama Editor, the Preview window doesn't >>>>> offer enough options. Load the 'anchor' photo first and set the >>>>> roll, pitch and yaw to zero, create control points, and optimise >>>>> 'positions and view'. The 'anchor' photo should stay in place and >>>>> the other photo should move to fit. >>>>> >>>>> In the Stitcher tab, set the output projection to rectilinear, but >>>>> before stitching select the 'remapped images' option. The will save >>>>> the images you want as TIFF files (usually they are deleted after >>>>> blending). >>>>> >>>>> My experience to trying this with old photos is that you should >>>>> switch it around. You know the parameters of your new photo, so this >>>>> should be your anchor, old photos have unknown lenses and are often >>>>> cropped asymmetrically (which Hugin can deal with using the d,e >>>>> parameters). >>>>> >>>>> -- >>>>> Bruno >>>>> >>>>> -- >>>>> A list of frequently asked questions is available at: >>>>> http://wiki.panotools.org/Hugin_FAQ >>>>> --- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "hugin and other free panoramic software" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/hugin-ptx/YHisTgbrKAXTKBtJ%40postle.net >>>>> . >>>>> >>>> -- >>> A list of frequently asked questions is available at: >>> http://wiki.panotools.org/Hugin_FAQ >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "hugin and other free panoramic software" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> >> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/hugin-ptx/65ec62a8-3fec-4dd8-971c-fdd101d666c4n%40googlegroups.com >>> <https://groups.google.com/d/msgid/hugin-ptx/65ec62a8-3fec-4dd8-971c-fdd101d666c4n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- > A list of frequently asked questions is available at: > http://wiki.panotools.org/Hugin_FAQ > --- > You received this message because you are subscribed to a topic in the > Google Groups "hugin and other free panoramic software" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/hugin-ptx/AMBXVuOMZSk/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/hugin-ptx/830f1ec8-dc9b-4636-8a6a-0276d097459dn%40googlegroups.com > <https://groups.google.com/d/msgid/hugin-ptx/830f1ec8-dc9b-4636-8a6a-0276d097459dn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/CACvYp116C9_tmf-Kw4UAieEaNe%3DVLdREC2fjEkbNf4D88vNveQ%40mail.gmail.com.
