On Sat, 2022-03-12 at 23:43 -0800, T. Modes wrote: > > > For the default branch you still need the exiv2 version from the repository > (which > has no official version number, so this can't be checked, 0.27. is not recent > enough) > or to disable the metadata transfer ( -DENABLE_METADATA_TRANSFER=OFF) > But this is not new. I wrote this already to you > https://groups.google.com/g/hugin-ptx/c/MOx1J8OXABU/m/cBd3ihaxAQAJ > Here nothing has changed.
Just a followup on this, which may be of interest to some. I pulled exiv2 from the repository, which git described (git describe --tags) as version 'nightly-34-g573c3c79'. I set the version in the rpmbuild spec file as '0.27.99.0' following previous practice by others, and attempted to build, but rpmbuild failed with a message to the effect (I didn't record the exact detail) that rpmbuild detected that the version was '1.0.0.9'. Setting the rpmbuild version to '1.0.0.9' built without error. Unfortunately I can't install this version of exiv2 as it causes conflicts with a couple of programs that were built with the current version (0.27) of exiv2. The suggested alternate solution of -DENABLE_METADATA_TRANSFER=OFF looks the only answer at the moment. Cheers, -- Terry Duell <[email protected]> -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/be570e37a7a044f2b4a0db95598248f46975b177.camel%40iinet.net.au.
