No problem.
I've never made a 360-deg pano. I don't know how to make one at all. So
I might simply not be doing it right in the first place. But the second
time I tried, I got a 360-deg panorama from it.
On 8/1/24 17:39, Samuel Rhoads wrote:
I screwed up. I was pretty sure I had only included the *_1 files,
but I see that I did include two _3 files by mistake. Sorry 'bout that!
But the 12 _1 files: 0_1, 30_1, 60_1 ..., should make a 360 degree pan.
On Thu, Aug 1, 2024 at 5:23 PM David W. Jones <[email protected]>
wrote:
Yes, I used your zip file, the one in the link below. It doesn't
have 12 images in it, it has 14.
These two images don't have any mountains or ocean in them:
120_3.jpg and 210_3.jpg. The 210_3 image has a part of the same
beach that's already covered in the 210_1 image.
I think the *_3 images aren't needed, and apparently you removed
them from some other zip file you uploaded to Google Drive?
I've never made a 360-deg panorama, so I got a 180-degree partial one.
On 8/1/24 13:41, Sam Rhoads wrote:
David: That’s confusing. The 12 images: 0_1 through 330_1, all
have either the ocean or mountains on the horizon. Did you use
the zip file that had all 12 images? If some of those 12 images
were removed, the panorama wouldn’t have been complete?
Sam.
On Aug 1, 2024, at 11:48 AM, Gnome Nomad <[email protected]>
<mailto:[email protected]> wrote:
When I tried the Hugin Assistant, it found control points on all
of them. I don't know anything about using Translation. I did
eventually get sort-of straight horizon but only after removing
two images that were mostly building foundations that had no
horizon as part of them.
--
David W. Jones
[email protected]
exploring the landscape of god
http://dancingtreefrog.com
Sent from my Android device.
On Thu, Aug 1, 2024, 11:30 Samuel Rhoads <[email protected]>
wrote:
Thanks Carl. Any idea why the optimizer tab only shows up
then? I spent hours trying to get the optimizer tab to
appear There are so many things that I just do not
understand. I don’t understand how people learn all these
options.
Sam
On Aug 1, 2024, at 11:25 AM, Carl Ovenschotel
<[email protected]> wrote:
Indeed it couldn't find points for those images.
The Optimizer tab pops up when you have Optimize \
Geometric \ Custom Parameters selected.
On Thursday, August 1, 2024 at 2:38:37 AM UTC+2
[email protected] wrote:
Carl: Can you tell me a little about your experience?
Did Hugin tell you that it couldn’t find any CPs for
120_1 & 150_1? Did the Optimizer tab appear? Did the
stitcher report that some images didn’t belong to the set?
Sam.
On Jul 31, 2024, at 12:31 PM, Carl Ovenschotel
<[email protected]> wrote:
I tried to make a panorama of your photos but I
failed. After years of using Hugin I still don't know
what I'm doing. Maybe someone else can give it a go.
On Wednesday, July 31, 2024 at 8:45:30 PM UTC+2
[email protected] wrote:
To be clear, I am hoping that someone in the
community will take the 12 images in this zip file
and try to create a panorama using Hugin. When I
do that, I get strange error messages that I do
not understand. The resulting panorama won’t be
satisfactory for SkySafari, but at least I’ll find
out what’s causing the errors.
Sam.
On Jul 30, 2024, at 4:16 PM, Samuel Rhoads
<[email protected]> wrote:
Trying once again! Forgive an old stupid man,
please.
0_1 - 330_1 (2).zip
<https://drive.google.com/file/d/1Rx8y_NfMlTnpst-ZdxGfUUkP9kPs2s9B/view?usp=drive_web>
--
David W. Jones
[email protected]
wandering the landscape of god
http://dancingtreefrog.com
My password is the last 8 digits of π.
--
A list of frequently asked questions is available at:
http://wiki.panotools.org/Hugin_FAQ
---
You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/hugin-ptx/7faf9222-51d6-492c-ba74-df3bd1b855d4%40gmail.com.
