Hi, I am using a pan/tilt robot to take pictures which I later assemble to a panorama using Hugin. Using the robot I get very a precise yaw-position for each image, and I input these values into Hugin. Then I want to optimize roll, pitch and the lens parameters before stitching. All the lens parameters are linked to a single lens instance (I do not touch zoom/focus during the take). I would like to link the pitch and roll parameters to a single instance as well, but I cannot find out how to do that. Does anyone know if it is possible in Hugin?
It is possible in PTOptimizer, you can edit the .pto-file and enter ‘r=0’ and ‘p=0’ for all but the first image and only optimize r0 and p0, but it would be nicer to be able to do it from within the Hugin GUI. The reason I want to do it this way is that I believe the cameras axis of rotation is very rigid. If assuming the axis is pointing straight up, then each image should have the exact same pitch and roll (only different yaw), and should be optimized as a single instance. And it is always good to keep the number of free parameters as low as possible. In real life the axis is of course not pointing perfectly straight upwards, but that can be corrected after the first optimization by dragging the whole panorama as one entity. - Henrik -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/hugin-ptx/2383c155-a6c8-4424-831d-1b027a3509b8n%40googlegroups.com.
