I updated the BIOS and still got the error on this host, then I did what I should have done in the first place and checked another physically identical host. Of the 4 nodes I have that are the same, only this one exhibits the error. At this point I'm blaming a hardware problem, if there's any benefit to hwloc for me to send additional debugging information I am happy to, otherwise I'm going try to figure out how what to say to HP to get this node fixed.
Thanks, jbh On Wed, May 30, 2012 at 9:27 AM, John Hanks <john.ha...@usu.edu> wrote: > I recently inherited these machines and would bet small amounts of > hard currency they have never seen a BIOS update since birth. I'll > figure out how to update the BIOS and let you know if the error > persists. > > Thanks, > > jbh > > On Wed, May 30, 2012 at 9:24 AM, Jeff Squyres <jsquy...@cisco.com> wrote: >> On May 30, 2012, at 11:22 AM, Samuel Thibault wrote: >> >>> i.e. the kernel reports that socket 0 is completely in node 1, while >>> socket 1 is half in node 1 and half in node 2. Do you have more >>> information about what the machine actually contains socket- and >>> NUMA-wise? The dell website is not really felpful, it talks about 4-16 >>> cores for the DL165 G7, while you have 24. >> >> >> How old is your Dell BIOS firmware? You might need to update it. >> >> -- >> Jeff Squyres >> jsquy...@cisco.com >> For corporate legal information go to: >> http://www.cisco.com/web/about/doing_business/legal/cri/ >> >> >> _______________________________________________ >> hwloc-users mailing list >> hwloc-us...@open-mpi.org >> http://www.open-mpi.org/mailman/listinfo.cgi/hwloc-users
