* From "a l i + +" <[EMAIL PROTECTED]>
> * From [EMAIL PROTECTED]
>
> how about making the three outputs that the rm1x has assignable? there are
> three taht would be cool and what about the footswitch could that be made
> into an input for use with the effects block or used as another output?
(I
> know these are kinda naive sounding as mentioned but i have only put
together
> the paia fatman synth and im still workin on how to make it respond to
midi
> messages instead of playing one note when it turns on) [i did assign the
two
> stereo outputs by panning things to the max and running each channel
through
> the effects i wanted it works great]
unfortunately, the rm1x is not made of discrete circuits as the fatman is,
so there's no way to alter its design with a soldering iron. in analogue
gear it would be fairly simple to drive the filter by connecting a jack to
its input, in digital there's simply no way. remember that most of the
synths you see today are software synths (or sequencers, or what else), and
the hardware you see is 'only' an interface for the software. to do what you
ask you would need to rewrite the software and do some internal rewiring.
it's a pita, but it's how synths are made in 1999.
=[
ali
___________________________________________________________________________
The Yamaha Hardware Sequencer (qy/rm1x) Mailing List is a free service
provided by TekLab and is open to all members of the Internet community.
For more information about this list and other TekLab Mailing lists visit
our web site: http://www.teklab.com/services/mailinglists/
**> NEW: TekLab Music Technology Forums: http://www.teklab.com/forums/ <**
