* From Simon Spero <[EMAIL PROTECTED]> I finally figured out why I've been getting so confused lately... there seems to be a wierd bug with program changes and outboard equipment that only shows up if you assign a midi channel to a track that is diferent to the track number. When you twiddle the knob from the voice screen, the RM1-X sends a PC message to the midi port, but using the channel id of the track, not the one designated in setup. However, if you do something on the RM1X like undo a job or start a realtime record, it sends the PC message to the channel used in midi setup. I believe the latter behaviour is the correct one- one of the them is defintely wrong. The JP-8000 doesn't like changing its midi channels- it wants to be channels 1 and 2. The RM1-X likes to have drums on the lower 8 tracks. I guess the JP-8000 wins this time. Of course, the really annoying thing is I have been using MIDI-OX as a midi thru. I guess it doesn't heard to read what it actually says rather than what I expect it to say :-) ___________________________________________________________________________ The Yamaha Hardware Sequencer (qy/rm1x) Mailing List is a free service provided by TekLab and is open to all members of the Internet community. For more information about this list and other TekLab Mailing lists visit our web site: http://www.teklab.com/services/mailinglists/ **> NEW: TekLab Music Technology Forums: http://www.teklab.com/forums/ <**
