* From "Michael Weiser" <[EMAIL PROTECTED]>
>* From "R. Cliff Young" <[EMAIL PROTECTED]>
>
>Has anyone been able to get the RM1x to sync to MTC? I can get MIDI Clock
>to work fine, but have had no success with MTC. (Just now I tried syncing
>the RM1x to ACID Pro using MTC--there was a lot of activity at the RM1x'
>MIDI IN LED, but no joy.)
*Yes* . . . I finaly got it to work. As I believe it was previously
mentioned on this list, it only functions in SONG mode.
This makes sense; MTC is locking the sequencer to an incoming frame rate of
30 NON-DROP and to a particular bar number. Thus if you jump to -say- bar 47
in your song the RM1x needs to know where bar 47 is. It only knows this in
SONG mode (although logicaly it *should* know this in PATTERN-CHAIN as
well).
Make sure you set your OFFSET to the correct # for the beginning of your
song.
The other part of the equation is that the program you're using (such as
ACID) must have MTC implemeted correctly. It has been my experience that a
few choice pieces of software *do not* send it out correctly . . . of
course, it could be that the RM1x is finicky too..
Cheers,
Michael Weiser
Producer, Composer & Recording Engineer
[EMAIL PROTECTED] * Check out the NEW MUSIC :
www.mp3.com/ReFraction*
___________________________________________
MW MUSIC PRODUCTIONS
http://webhome.idirect.com/~mweiser
Ottawa, Canada (613) 277-4822
___________________________________________________________________________
The Yamaha Hardware Sequencer (qy/rm1x) Mailing List is a free service
provided by TekLab and is open to all members of the Internet community.
For more information about this list and other TekLab Mailing lists visit
our web site: http://www.teklab.com/services/mailinglists/
**> NEW: TekLab Music Technology Forums: http://www.teklab.com/forums/ <**
