At 11:39 PM 12/13/99 -0500, you wrote:
>:::cross post::::
>
>
>I'm working with a song that has a drum line (track 2) with a
>PB line inputted over top of it (no, not my glide trick.. actually step
>written)... as a variation, I copied the track and would like to
>loop the PB section from M001:1:000 ~ M001:2:000 for all
>4 counts, but NOT the notes..
>(the original pattern has various PB data inputted for every 16th step
>for all four counts)..
>
I suppose you can extract the PB data to a new phrase, and repeat it for
however many measures you want it to be. Now put the phrase on a different
track (track 3 for example) and set track 3 to use the same midi/tone
generator channel as track 2. (press the 'setup' button 3 times to get to
the out channel assignment page). I've never done this with pitchbend, but
I have done it with CC messages (filter cutoff etc) and it works fine. I
hope i've understood you correctly here.
>How can I do this? in cubase, all I would have to do was copy the
>PB data to a separate track, remove the note info from my copy
>and the PB data from the original. Then I would loop the bit
>I wanted and direct the output PB data towards the right midi channel
>and outport...
>
>o0o[qiB.]o0o
>
>
>
>
--- Tyler Hanel
--- [EMAIL PROTECTED]
--- http://members.home.com/tylero/music.htm
--- http://www.thehungersite.com ---
