Found this in my mail archive:
i ran into this same problem and it was driving me crazy, but someone else
posted how to fix this a while back. even though you're sending your midi
out to the a3k, you need to make sure that the internal rm1x voice for that
track is NOT set to say "Phrase" for the Bank in the voice setup.
apparantly the rm1x sends program change info with this setting, but not if
you set the bank to anything else.
and
Under Voice selection type, change each track to anything *other* than
"phrase" (i.e. "Band Instruments" , "SyPad&Lead", etc.)
Hope this sorts you out bobule
Pete
----- Original Message -----
From: Olaf Molenveld <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: 26 January 2000 16:13
Subject: Re: a3000 and rm1x
> i've read several postings on the forum and on this mailinglist that gave
> the solution to this programchange behaviour.....i cannot access the forum
> right now, so i cannot check...anyone else?
>
> Olaf
>
> ----- Original Message -----
> From: phil grossblatt <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Wednesday, January 26, 2000 5:01 PM
> Subject: Re: a3000 and rm1x
>
>
> > > really? hmmm i shall check
> > > would make sense - but i have looked in edit mode for a prog change
> message
> > > and couldnt find one
> > > i shalll look further, thanks :)
> >
> > This is kind of a bug...
> > There is a way to filter out pc messages,but this only applies to pc
> > you may have inserted into a sequence.
> > I think the "chase controllers" setting may be of importance,but it's
> > probably just as well to turn off pc on your sampler....
> > >
> > > ----- Original Message -----
> > > From: Olaf Molenveld <[EMAIL PROTECTED]>
> > > To: <[EMAIL PROTECTED]>
> > > Sent: Wednesday, January 26, 2000 11:39 AM
> > > Subject: Re: a3000 and rm1x
> > >
> > >
> > > > isn't this something that has to do with the phrase you have
selected
> in
> > > the
> > > > RM1x? i believe in some phrases there is a program-change message in
> the
> > > > first measure...
> >
