I may be answering more than you asked, but bear with me.... As far as
voices go you can set the voices used either at the Style (song) level or in
each Phrase (part) so that you could have different voices for each pattern,
and the voice changes are transmitted once when you switch to that pattern.
For CCs (I assume you are mostly concerned with the controller knobs), the
knobs can be set up on a per Style (song) basis, so each song can have it's
own knob setup of different CCs. As far as changing the CCs in the Orbit,
I'm using a Proteus2000 and setting up the controllers in it to mirror the
basic Yamaha scheme was pretty easy. I used to own an Orbit but I can't
recall too much about it's setup, but my bet is you can probably do the same
thing without too much pain...
Hope this helps,
Mac Daddy
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, April 26, 2000 8:38 AM
> To: [EMAIL PROTECTED]
> Subject: orbit/planet phatt redux
>
>
> Hi - a while back someone asked how an rm1x works with an emu
> planet phatt,
> like setting the cc #s to correspond, etc... don't think he got any
> response. Now i'm re-asking, this time in reference to an
> Orbit v2. What i
> want to know is, since orbit can't save multi-timbral setups
> itself, can you
> call up various banks and patches from the rm1x, via sysex,
> in song mode?
> Also, if the orbit uses different cc #s than the rm1x, can
> your song setup
> also include, for orbit channels, those particular cc #s, but on rm1x
> channels the "regular" cc #s ... in other words the cc
> numbers are song and
> channel/track specific, not a global setup for all songs and
> tracks. I'd
> really appreciate some info. here,
> Jim
>
>
>
>
>
> _______________________________________________________
> Get 100% FREE Internet Access powered by Excite
> Visit http://freelane.excite.com/freeisp
>
