It could be the standard midi 'Active Sensing' message, which allows midi
devices to ensure that they are still connected to something. There's
probably a sysex or NRPN message to disable it somewhere.
Paul K
>===== Original Message From [EMAIL PROTECTED] =====
>>I recently purchased the rm1x and have these two issues:
>>1- With the rm1x connected to my Opcode Studio 3 midi interface, the rm1x
>seems to be outputing a constant signal. The in/out lights >are constantly
>flashing very faintly on my Studio 3 (they flash brighter with midi
>signals). These signals cannot be midi because my >sampler (a3000) and my
>tone module (fs1r) midi indicators are not flashing. The set-up works
>perfectly with both sampler and module >responding to midi during playback
>and recording. I've changed some parameters in the utility mode but can't
>get the lights to stop. >Does the RM1X send a timing signal? Ive tried
>different settings for timing in the utility mode but can't seem to get the
>signals to turn >off. They are very annoying as ther flash constantly while
>nothings happening!
>
>http://members.xoom.com/MIDIOX/midiox.htm
>
>this is a nice (free) tool to monitor MIDI stuff (PC)
>
>>2- When recording in grid mode ( drums on track 1), how come i can't hear
>the other tracks (a baseline on track 9, for example)? I >can hear all the
>other tracks in the other recording modes: replace and overdub. Is there
>something amiss? Under setup the, out >channels are setup to TG.
>
>in GRID u only hear the 'current' voice , silly, isnt it :)
>
>
>>thanks (sorry about the length), rwbw :-)
_________________________________________________________________
A Message from Paul Kaufman, in sunny Cambridge, England !
